A Study on the Measurement of End Bearing Capacity for Large Diameter Drilled Shaft Constructed in Fault Zone Using the Static Bi-directional End Leading Test

양방향 선단재하시험을 이용한 단층파쇄대에 시공된 대구경 현장타설말뚝의 선단지지력 측정 연구

  • 정창규 (부산광역시 감사관실) ;
  • 정성민 (경성대학교 공학기술연구) ;
  • 황근배 (경성대학교 공학기술연구) ;
  • 최용규 (경성대학교 건설ㆍ환경공학부)
  • Published : 2004.07.01

Abstract

In the land section of marine bridge construction site, to confirm the end bearing of large diameter drilled shaft constructed in the fault zone which was discovered unexpectedly, the hi-directional end loading tests were performed. The objectives of this study are to confirm the end bearing of the pile constructed in fault zone and the increasing effect of end bearing after grouting the base ground beneath the pile toe. After grouting the pile base ground, the settlement of pile base decreased considerably and the pile base resistance increased more than twice.

해상교량건설 현장의 육상구간에서 예기치 않게 발견된 단층파쇄대에 시공된 대구경 현장타설말뚝의 선단지지력을 확인하기 위하여 양방향 선단재하시험을 실시하였다. 본 연구의 목적은 단층파쇄대에 시공된 대구경 현장타설말뚝에 재하시험을 실시하여 단층파쇄대에서의 선단지지력을 확인하고, 그 후 말뚝 선단 하부지반에 보강 그라우팅을 실시하여 선단보강에 의한 선단지지력 증가효과를 확인하는 것이다. 선단보강 그라우팅 후 선단지지력은 2배 이상 증가하였으며 보강전 보다 선단의 침하량이 현저하게 줄어드는 것을 확인할 수 있었다.

Keywords

References

  1. 경성대학교 공학박사 학위논문 선단유압재하시험법의 현장적용성에 관한 연구 정창규
  2. 부산남항대교 건설공사 (2공구)시 오스트버어그셀을 이용한 단층파쇄대에 근입된 대구경현장타설말뚝의 선단지지력 측정 및 하중전이측정 연구용역 보고서 한국지반공학회
  3. 부산남항대교 건설공사 (2공구) 육상부 시공보링 지반조사보고서 부산광역시 건설본부
  4. ASTM D1143-81 Standard Test Method for Piles Under Static Axial Compressive Load American Society for Testing and Materials [ASTM]
  5. 7th International Conference & Exhibition on Piling and Deep Foundaitons The Osterberg Load Test Method for Bored and Driven Piles - The First Ten Years Osterberg, J. O.