참고문헌
- Johnson, R. H., 1970, 'Superplasticity,' Met. Rev. 15 pp. 115-134 https://doi.org/10.1179/imr.1970.15.1.115
- Winkler, P-J., 1990, Superplasticity in use: A Critical Review of its Status,Trends and Limits, Superplasticity in Metals, Ceramics and Intermetallic Symp., California, USA, pp. 123-126
- Zhou, M. and Duune, F.P.E., 1996, 'Mechanisms-based Constitutive Equations for the Superplastic Behavior of a Titanium Alloy,' J. of strain Analysis, Vol.31, pp.65-73 https://doi.org/10.1243/03093247V313187
- Kim, T.W. and Dunne, F.P.E., 1999, 'Inhomogeneous Deformation and Failure in Superplasticity,' Proc. R. Soc. Land. Vol. 455, pp. 719-735 https://doi.org/10.1098/rspa.1999.0331
- Cheong, B.H., Lin, J. and Ball, A.A., 2003, 'Modelling the Effects of Grain-size Gradients on Necking in Superplastic Forming,' J. Mater. Pro. Technol., Vol. 119, pp. 316-365
- Jae Do Kwon, Yong Tak Bae and Sung Jong Choi, 'The Evaluation of Mechanical Properties on the Changes of Microstructure for Titanium Alloy(Ti-6Al-4V),' Trans. of the KSME, A, Vol. 26, No. 4, pp. 609-616
- Hoon-Chul Yang and Ki-Tae Kim, 'Densification Behavior of Ti-6Al-4V Powder Compacts by Hot Isostatic Pressing,' Trans. of the KSME A, Vol. 24, No. 2, pp. 394-402
- Shi, L. and Northwood, D.O., 1995, 'Grain Size Effect Evolution in High Temperature Creep and Superplastic Deformation of Polycrystalline Materials,' Mater. Sci. Forum, Vol. 189, pp. 335-340 https://doi.org/10.4028/www.scientific.net/MSF.189-190.335
- Gosh, A.K. and Raj, R., 1986, 'A Model for the Evoluation of Grain Size Distribution During Superplastic Deformation,' Acta. Met. Mater., Vol 34, No. 3, pp. 447-456 https://doi.org/10.1016/0001-6160(86)90080-5
- Zhang, X.Z. and Knott, J.F., 2000, 'The Statistical Modelling of Brittle Fracture in Homogeneous and Heterogeneous Steel Microstructures,' Acta Mater., Vol. 48, pp. 2135-2146 https://doi.org/10.1016/S1359-6454(00)00055-0
- Todinov, M.T., 2001, 'Statistical Modelling the Scatter of Properties from Sampling of Inhomogeneous Materials,' Com. Mater. Sci., Vol. 21, pp. 436-451 https://doi.org/10.1016/S0927-0256(01)00180-X
- Corson, P.B., 1974, 'Correlation Functions for Predicting Properties of Heterogeneous Mateials II. Emprical Construction of Spatial Correlation Functions for Two-Phase Solids,' J. Appl. Phys., Vol. 45, No. 7, pp. 3165-3170 https://doi.org/10.1063/1.1663742
- Corson, P.B., 1974, 'Correlation Functions for Predicting Properties of Heterogeneous Materials III. Effective Elastic Moduli of Two-Phase solids,' J. Appl. Phys., Vol. 45, No. 7, pp. 3171-3179 https://doi.org/10.1063/1.1663743
- Lin, S., Garmestani, H. and Adams, B., 2000, 'Statistical Evolution of Probability Functions in an Inelasticly Deforming Two-Phase Medium,' Int. J. Solids. Struct., 37, pp. 423-434 https://doi.org/10.1016/S0020-7683(99)00013-X
- Lin, S. and Garmestani, H., 2000, 'Statistical Continuum Mechanics Aanalysis of an Eelastic Two-Isotropic-Phase Composite Material,' Comps. Part B, Vol. 31, pp. 39-46 https://doi.org/10.1016/S1359-8368(99)00050-5
- Kroner, E., 1971, Statistical Continuum Mechanics, Wien, New York, pp. 21-31
- Torquato, S. and Sheehan, N., 2001, 'Generating Microstructures with Specified Correlation Function,' J. Appl. Phys., Vol. 89, No. 1, pp. 53-60 https://doi.org/10.1063/1.1327609
- Saito, Y., 1997, 'The Monte Carlo Simulation of Microstructural Evoluation in Metal,' Mater. Sci. Eng. A, 233, pp.114-124 https://doi.org/10.1016/S0921-5093(97)80019-6
- Lee, H.N., Ryoo, H.S. and Hwang, S.K., 2000, 'Monte Carlo Simulation of Microstructure Evolution Based on Grain Boundary Character Distribution,' Mater. Sci. Eng. A, 281, pp. 176-188 https://doi.org/10.1016/S0921-5093(99)00725-X
- Gosh, A.K. and Hamilton, C.H., 1979, 'Mechanical Behavior and Hardening Characteristics of a Superplastic Ti-6Al-4V Alloy,' Met. Trans. A., Vol.10A, pp.699-706 https://doi.org/10.1007/BF02658391
- Nieh, T.G., Wadsworth, J. and Sherby, O.D., 1997, 'Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, pp. 32-49
- Lemaitre, L. and Chaboche, J-L., 1990, Mechanics of Solid Materials, Cambridge University Press, Cambridge, pp. 176-235
- Baudelet, B. and Suery, M., 1998, 'Plastic stability and Strain to Fracture during Superplastic Deformation,' Superplasticity and Superplasic Forming(Ed. C.H. Hamilton, N.E. Paton), Proc. Int. Conf., Washington, USA, pp. 135-148
- Majorell, A., Srivasta, S. and Picu, R.C., 2002, 'Mechanical Behavior of Ti-6Al-4V at High and Moderate Temperatures-Part I: Experimental Results,' Mater. Sci. Eng. A, Vol. 326, pp. 306-316 https://doi.org/10.1016/S0921-5093(01)01507-6
- Haldar, A. and Mahadevan, S., 2000, Probability, Reliability and Statistical Methods in Engineering Design, John Wiley & Sons, New York, pp. 114-117
- Kim, T.W., 2001, 'Heterogeneous Microstructure of Ti-6Al-4V and its Effect on Superplastic Deformation,' Scripta Mater., Vol. 45, pp. 923-929 https://doi.org/10.1016/S1359-6462(01)01113-7