참고문헌
-
Choi, C. H., 1999, 'Analysis of Steady and Unsteady Compressible Flows Using a Low Reynold Number
${\kappa}-{\omega}$ Turbulence Model,' Ph. D. Dissertation. Seoul National University, Korea - Cumpsty, N. A., 1989, Compressor Aerodynamics, Longman Scientific & Technical
- Denton, J. D., 1993, 'Loss Mechanisms in Turbomachines,' Journal of Turbomachinery, Vol. 115, pp. 621-656 https://doi.org/10.1115/1.2929299
- Farge, T. Z., Johnson, M. W. and Maksoud, T. M. A., 1989, 'Tip Leakage in a Centrifugal Impeller,' Journal of Turbomachinery, Vol. 111, pp. 224-249
- Hah, C. A., 1986, 'A Numerical Modeling of Endwall and Tip-Clearance Flow of an Isolated Compressor Rotor,' Journal of Engineering for Gas Turbines and Power, Vol. 108, pp. 15-21 https://doi.org/10.1115/1.3239863
- Ishida, M., Ueki, H. and Senoo, Y., 1990, 'Effect of Blade Tip Configuration on Tip Clearance Loss of a Centrifugal Impeller,' Journal of Turbomachinery, Vol. 112, pp. 14-18 https://doi.org/10.1115/1.2927412
- Japikse, D. and Baines, N. C., 1994, Introduction to Turbomachinery, Concepts ETI, Inc. and Oxford University Press
- Koch, C. C. and Smith Jr., L. H., 1976, 'Loss Sources and Magnitudes in Axial-Flow Compressors,' Journal of Engineering for Power, July, pp. 411-424
- Lakshminarayana, B., 1970, 'Methods of Predicting the Tip Clearance Effects in Axial Flow Turbomachines,' Journal of Basic Engineering, Vol. 92, pp. 467-482 https://doi.org/10.1115/1.3425036
- Lakshminarayana, B., 1996, Fluid Dynamics and Heat Transfer of Turbomachinery, John Wiley & Sons, Inc.
- Larosiliere, L. M., Skoch, G. J. and Prahst, P. S., 1999, 'Tip Leakage in a Centrifugal Impeller Using Computational Fluid Dynamics and Measurements,' Journal of Propulsion and Power, Vol. 15, No. 5, pp. 623-632 https://doi.org/10.2514/2.5486
- Moore, J., Moore, J. G. and Timmis, P. H., 1984, 'Performance Evaluation of Centrifugal Compressor Impellers Using Three-Dimensional Viscous Flow Calculations,' Journal of Engineering for Gas Turbines and Power, Vol. 106, pp. 475-481 https://doi.org/10.1115/1.3239590
- Myong, H. K. and Yang, S. Y., 2003, 'Numerical Study on Flow Characteristics at Blade Passage and Tip Clearance in a Linear Cascade of High Performance Turbine Blade,' KSME International Journal, Vol. 17, No. 4, pp. 606-616 https://doi.org/10.1007/BF02984462
- Pampreen, R. C., 1973, 'Small Turbomachinery Compressor and Fan Aerodynamics,' Journal of Engineering for Power, July, pp. 251-256
- Rains, D. A., 1954, 'Tip Clearance Flows in Axial Flow Compressors and Pumps,' California Institute of Technology, Hydrodynamics and Mechanical Engineering Lab., Report No. 5
- Senoo, Y. and Ishida, M., 1986, 'Pressure Loss Due to the Tip Clearance of Impeller Blades in Centrifugal and Axial Blowers,' Journal of Engineering for Gas Turbines and Power, Vol. 108, pp. 32-37 https://doi.org/10.1115/1.3239882
- Sensoo, Y. and Ishida, M., 1987, 'Deterioration of Centrifugal Performance Due to Tip Clearance of Centrifugal Impellers,' Journal of Turbomachinery, Vol. 109, pp. 55-61 https://doi.org/10.1115/1.3262070
- Shum, Y. K. P., Tan, C. S. and Cumpsty, N. A., 2000, 'Impeller-Diffuser Interaction in Centrifugal Compressor,' Journal of Turbomachinery, Vol. 122, pp. 777-786 https://doi.org/10.1115/1.1308570
- Storer, J. A. and Cumpsty, N. A., 1991, 'Tip Leakage Flow Axial Compressor,' Journal of Turbomachinery, Vol. 113, pp. 252-259 https://doi.org/10.1115/1.2929095
- Whitifield, A. and Baines, N. C., 1990, Design of Radial Turbomachines, Longman Scientific & Technical