Journal of Mechanical Science and Technology

  • 제18권6호
  • /
  • Pages.924-932
  • /
  • 2004
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

An Experimental Study on the Axial Collapse Characteristics of Hat and Double Hat Shaped Section Members at Various Velocities

  • Cha, Cheon-Seok (Division of Mechanical and Automotive Engineering, Sunchon National University) ;
  • Chung, Jin-Oh (Division of Mechanical and Automotive Engineering, Sunchon National University) ;
  • Yang, In-Young (Division of Mechanical Engineering, Chosun University)
  • 발행 : 2004.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the axial collapse tests were performed under either static (or quasi-static) or impact loads with several collapse velocities based on the expectation that para-closed sections of the front-end side members (spot welded hat and double hat shaped section members) would show quite different collapse characteristics from those for seamless section. The test results showed that both of the hat and double hat shaped section members failed in the stable sequential collapse mode in the static or quasi-static collapse tests, while the double hat shaped section members underwent the unstable collapse mode especially when the impact velocity is high. The mean collapse loads in the hat shaped section members increase with collapse velocity for all the cases of the static, quasi-static, and impact collapse tests. In the double hat shaped section members, however, the mean collapse loads decrease with increase in collapse velocity in the impact tests.

키워드

참고문헌

  1. Avalle, M. and Belingardi, G., 1997, 'Experimental Evaluation of the Strain Field History During Plastic Progressive Folding of Aluminium Circular Tubes,' International Journal of Mechanical Science, Vol. 39, No. 5, pp. 575-583 https://doi.org/10.1016/S0020-7403(96)00063-X
  2. Bardi, F. C., Yun, S. and Kyriakides, S., 2003, 'On the Axisymmetric Progressive Crushing of Circular Tubes Under Axial Compression,' International Journal of Solids and Structures, Vol. 40, pp. 3137-3155 https://doi.org/10.1016/S0020-7683(03)00111-2
  3. Cha, C. S., Kang, J. Y. and Yang, I. Y., 2001, 'Axial Impact Collapse Analysis of Spot Welded Hat Shapse Section Members,' KSME International Journal, Vol. 15, No. 2, pp. 180-191
  4. Cha, C. S., Kim, Y. N., Kim, S. K., Im, K. H. and Yang, I. Y., 2002, 'Axial Impact Collapse Analysis of Spot Welded Hat and Double-Hat Shaped Section Members Using an Explicit Finite Element Code,' KSME International Journal, Vol. 16, No. 1, pp. 32-38 https://doi.org/10.1007/BF03185153
  5. Han, B. K., Park, B. H. and Ahn, D. S., 1998(a), 'The Relationship Between Local and Overall Buckling of Rectangular Tubes (I),' Transactions of the KSME, Vol. 22, No. 4, pp. 887-894
  6. Han, B. K., Park, B. H. and Ahn, D. S., 1998(b), 'The Relationship Between Local and Overall Buckling of Rectangular Tubes (II),' Transactions of the KSME, Vol. 22, No. 4, pp. 895-904
  7. Ishikawa, H., 1985, 'Computer Simulation of Automobile Collision-Reconstruction of Accidents,' SAE Paper, No. 851729, pp. 113-129
  8. Kim, C. W., Han, B. K. and Lim, C. H., 1997, 'Semi Empirical Analysis on the Crushing Mechanism of Thin-Walled Rectangular Tubes,' Transactions of the KSME, Vol. 21, No. 1, pp. 12-21
  9. Krauss, C. A. and Laananen, D. H., 1994, 'A Parametric Study of Crush Initiators for a Thin-Walled Tube,' International Journal of Vehicle Design, Vol. 15, 385-401
  10. Lee, H. I., Kim, B. J. and Han, B. K., 2002, 'Energy Absorption Characteristics and Optimal Welding Space of Square Hat Type Thin-Walled Tube,' Transactions of the KSME, Vol. 26, No. 12, pp. 2703-2714
  11. Li, S. and Reid, S. R., 1990, 'Relationship Between the Elastic Bucking of Square Tubes and Rectangular Plates,' International Journal of Applied Mechanics, Vol. 57, pp. 969-973 https://doi.org/10.1115/1.2897669
  12. Mahmood, H. F. and Paluzny, A., 1981, 'Design of thin walled Columns for Crash Energy Management-Their Strength and Model of Collapse,' Proc. 4rd International Conference on Vehicle Structural Mechanics, Nov. 18-20, pp. 7-18
  13. Singace,A.A.Axial Crushing Analysis of Tubes Deforming in the Multi-ModeInternational Journal of Mechanical Science https://doi.org/10.1016/S0020-7403(98)00052-6
  14. Syamal, P. K. and Bhatti, M., 1995, 'Rear Full overlap High Speed Car-to-Car Impact Simulations,' SAE Paper, No. 951085, pp. 51-59
  15. White, M. D. and Jones, N., 1999(a), 'Experimental Quasi-Static Axial Crushing of Top-Hat and Double-Hat Thin-Walled Sections,' International Journal of Mechanical Science, Vol. 41, pp. 179-208 https://doi.org/10.1016/S0020-7403(98)00047-2
  16. White, M. D., Jones, N. and Abramowicz, W., 1999(b), 'A Theoretical Analysis for the Quasi-Static Axial Crushing of Top-Hat and Double-Hat Thin-Walled Sections,' International Journal of Mechanical Sciences, Vol. 41, pp. 209-233 https://doi.org/10.1016/S0020-7403(98)00048-4