대한전기학회논문지:전기기기및에너지변환시스템부문B (The Transactions of the Korean Institute of Electrical Engineers B)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

최적 전류파형제어를 통한 브러시리스 DC 발전기의 출력밀도 최대화에 관한 연구

Power Density Maximization of the Brushless DC Generator by Controlling the Optimal Current Waveform

  • 이형우 (미국 코넬대학 이론응용역학과)
  • 발행 : 2004.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents an advanced control technique for power density maximization of the Brushless DC (BLDC) generator by using the linear tracking method. In a generator of given rating, the weight and size of the system affect the fuel consumption directly. Therefore, power density is one of the most important issues in a stand-alone generator. BLDC generator has high power density in the machine point of view and additional increases of power density by control means can be expected. Conventional rectification methods cannot achieve the maximum power possible because of hon-optimal current waveforms. The optimal current waveform to maximize power density and minimize machine size and weight in a nonsinusoidal power supply system has been derived, incorporated in a control system, and verified by simulation and experimental work. A new simple algebraic method has been proposed to accomplish the proposed control without an FFT which is time consuming and complicated.

키워드

참고문헌

  1. Hyung-Woo Lee, Tae-Hyung Kim and M. Ehsani, 'Power Density Maximization of the Brushless DC Generator,' IECON03 conference, pp.2162-2166, November 2003 https://doi.org/10.1109/IECON.2003.1280578
  2. T. Kenjo and S. Nagamori, Permanent Magnet and Brushless DC Motors. Sogo Electronics Publishing Company, 1994
  3. J. R. Hendershot Jr. and T. J. E. Miller, Design of Brushless Permanent-magnet Motors. Oxford Magna Physics Publications, ISBN 1-881855-03-1, 1994
  4. R. Krishnan and G. H. Rim, 'Modeling simulation, and analysis of variable-speed constant frequency power conversion scheme with a permanent magnet brushless dc generator,' IEEE Trans. Industrial Electronics, vol. 37, no. 4, pp. 291-296, Aug., 1990 https://doi.org/10.1109/41.103415
  5. N. Mohan, T. M. Undeland and W. P. Robbins, Power electronics: converters, applications and design. 2nd ed. John Wiley & Sons, 1995
  6. A. W. Green and J. T. Boys, 'Hysteresis current-forced three phase voltage-sourced reversible rectifier,' IEE Proceedings, vol. 136, no. 3, pp. 113-120, May, 1989
  7. B. K. Bose, 'Power Electronics A Technology Review,' Proceedings of the IEEE, Vol. 80, No. 8, pp. 1303-1334, August, 1992 https://doi.org/10.1109/5.158603