한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제37권3호
  • /
  • Pages.158-163
  • /
  • 2004
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지

ITO 박막의 공정변수에 따른 특성 연구

Dependance of the Process Parameters on the Characteristic of the ITO Thin Films

  • 김소라 (한국기술교육대학교, 신소재공학과) ;
  • 서정은 (한국기술교육대학교, 신소재공학) ;
  • 김상호 (한국기술교육대학교, 신소재공학과)
  • 발행 : 2004.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

ITO thin film was deposited on the glass by RF magnetron sputtering. Dependance of the process parameters such as thickness, target-to-substrate distance, substrate temperature and oxygen partial pressure on the transmittance and electrical resistance of ITO film were investigated. The deposition conditions for getting better optical and electrical ITO characteristics were the 1800-$2300\AA$ thickness, 65mm substrate-to-target distance, $350^{\circ}C$ substrate temperature and 8% oxygen partial pressure. At these conditions, the transmittance and sheet resistance of the ITO film were 83.3% and 77.86Ω/$\square$, respectively.

키워드

참고문헌

  1. J. E. Costellamo, Handbook of Display Technology,Academic Press, New York, (1992)
  2. E. Aperathitis, M. Modreanu, M. Bender, V. Cimalla,G. Ecke, M. Androulidaki, N. Pelekanosa, Opticalcharacterization of indium-tin-oxynitride fabricatedby RF-sputtering, Thin Solid Films, (2003)
  3. T. C. Gorjanc, D. Leong, C. Py, D. Roth, Roomtemperature deposition of ITO using r.f. magnetronsputtering, Thin Solid Films, 413 (2002) 181-185 https://doi.org/10.1016/S0040-6090(02)00425-X
  4. Aldrin Antony, M. Nisha, R. Manoj, M. K. Jayaraj,Influence of target to substrate spacing on theproperties of ITO thin fi1ms, Applied Surface Science,225 (2004) 294-301 https://doi.org/10.1016/j.apsusc.2003.10.017
  5. 최병진, 최규만, 김기완, 이미지센서를 위한 ITO투명전극의 제조 및 그 특성, 센서기술 학술대회 논문집, 3(1) (1992) 318-323
  6. S. Ghosh, Hyunsoo Kim, Kwangpyo Hong, ChongmuLee, Micro structure of indium tin oxide depositedon porous silicon by rf-sputtering, Materials Scienceand Engineering, B95 (2002) 171-179