References
- Sundaram, K. B., Sah, R. E., Baumann, H., Balachandran, K. and Todi, R. M., 2003, ' Wet Etching Studies of Silicon Nitride Thin Films Deposited by Electron Cyclotron Resonance Plasma Enhanced Chemical Vapor Deposition,' Micorelectronic engineering, Vol. 70, pp. 109-114 https://doi.org/10.1016/S0167-9317(03)00412-X
- Geissler, M., Schmid, H., Michel, B. and Delamarche, E., 2003, 'Selective Wet Etching of Microcontact Printed Cu Substrates with Control Over the Etch Profile,' Microelectronic engineering, Vol. 67, pp. 326-332 https://doi.org/10.1016/S0167-9317(03)00086-8
- Jung, J. W. and Kim, D. J., 2004, 'A Study on Effect of Spray Characteristics on Etching Characteristics in Micro Fabrication System,' Transactions of the KSME B, Vol. 28, No. 1, pp. 109-117 https://doi.org/10.3795/KSME-B.2004.28.1.109
- Kim, M. and Lee, J. K., 1995, 'A Study on the Single-Side Photo Etchant,' J. Corros. Sci. Soc. of Korea, Vol. 24, No. 4, pp. 239-249
- Yoon, D. S., Lee, G. W. and Park, C. H., 2000, 'Studies on the Ferric Chloride Etching of Shadow Masks,' Journal of the Korean Institute of Chemical Engineers, Vol. 38, No. 3, pp. 393-397
- Allen, D. M., 1986, 'The Principles and Practice of Photochemical Machining and Photoetching,' Adam Hilger, Bristol
- Visser, A. and Buhlert, M., 2001, 'Theoretical and Practical Aspects of the Miniaturization of Lead Frames by Double Sided Asymmetrical Spray Etching,' Journal of Materials Processing Technology, Vol. 115, pp. 108-113 https://doi.org/10.1016/S0924-0136(01)00751-8
- Ueda, R., Toki, S., Tanizaki, Y., Sugiutra, T. and Asakura, S., 1994, 'Principles of Photoetching in the Fabrication of Fine-Pitch Lead Frames,' Metal Finishing, Vol. 92, No. 1, pp. 29-31
- Choi, Y. C., Jung, J. W. and Kim, D. J., 2001, 'Characteristics of Spray from Pressure-Swirl Nozzle with Different Liquid Properties and Nozzle Geometries,' Transactions of the KSME B, Vol. 25, No. 12, pp. 1813-1820
- Yule, A. J., 1996, 'Swirl Atomizers Operating at High Water Pressure,' International Journal of mechanical sciences, Vol. 38, No. 8, pp. 981-1000 https://doi.org/10.1016/0020-7403(95)00095-X
- Lopez, B., Soucemarianadin, A. and Attane, P., 1999, 'Break-up of Continuous Liquid Jets: Effect of Nozzle Geometry,' Journal of Imaging Science and Technology, Vol. 43, No. 2, pp. 145-152
- Im, K. S., Kim, H. and Lai, M. C., 2001, 'Parametric Study of the Swirler/Venturi Spray Injectors,' Journal of propulsion and power, Vol. 17, No. 3, pp. 717-727 https://doi.org/10.2514/2.5801