On-Line Feed-Forward Dead-Time Compensation Method

온라인 전향 데드타임 보상기법

  • 김현수 (㈜포스콘 기술연구소) ;
  • 윤명중 (한국과학기술원 전자전산학과)
  • Published : 2004.06.01

Abstract

In this paper, a new on-line dead-time compensation method is proposed. The output voltage errors due to the dead-time effect is considered as disturbance voltages. The magnitude of the disturbance voltages is estimated using a time delay control technique and the disturbance voltages are calculated using the estimated values, measured currents, and position information. The calculated disturbance voltages are fed to voltage references in order to compensate the dead-time effect. The proposed method is applied to a PM synchronous motor drive system and implemented in a digital manner using a digital signal processor (DSP) TMS320C31. The experiments are carried out for this system to show the effectiveness of the proposed method and the results show the validity of the proposed method.

본 논문에서는 새로운 온라인 데드타임 전향보상기법을 제안한다. 데드타임 효과(dead-time effect)로 인한 출력 전압 오차를 외란전압으로 간주하고 이를 추정하여 전향보상한다. 외란전압의 크기를 시간지연제어기법을 이용하여 추정하고, 추정된 값과 측정된 전류와 위치 정보로써 외란전압을 계산한다. 데드타임 효과를 보상하기 위해 계산된 외란전압은 전압지령에 전향된다. 제안된 방법은 DSP TMS320C31을 사용하여 디지털방식으로 영구자석 동기 전동기 구동 시스템에 적용이 된다. 제안된 방법의 효용성을 검증하기 위해 이 시스템에서 실험을 수행하였고 그 결과는 제안된 방법의 효과를 잘 보여주고 있다.

Keywords

References

  1. IEEE Trans. on Industry Applications v.IA-23 no.5 Waveform distortion and correction circuit for PWM inverter with switching lag-times Y.Murai;T.Watanabe;H.Iwasaki
  2. IEEE Trans. on Industry Applications v.27 no.3 Fully digital, vector-controlled PWM VSI-fed ac drives with an inverter dead-time compensation strategy T.Sukegawa;K.Kamiyama;K.Mizuno;T.Matsui;T.Okuyama
  3. IEEE Trans. on Power Electronics v.11 no.2 Inverter output voltage synthesis using novel dead-time compensation J.W.Choi;S.K.Sul
  4. KIPE Journal of Power Electronics v.2 no.1 A novel dead-time compensation method using disturbance observer H.S.Kim;H.T.Moon;M.J.Youn
  5. IEEE Trans. on Power Electronics v.16 no.1 A simple and robust digital control technique of a PM synchronous motor using time delay control approach K.H.Kim;M.J.Youn