Abstract
In order to investigate the Post-operative changes in scoliotic spine according to selection of fusion level a mathematical finite element model of King-Moe type II scoliotics spine system was developed. By utilizing this finite element scoliosis model surgical correction simulation procedures of pedicle fixation and derotation were simulated. In consequence of the calculation by changing the fusion Levels, postoperative changes like Cobb angle, apical vertebrae axial rotation (AVAR), thoracic kyphosis, and rib hump were Qualitatively analyzed. In the analysis of operative kinematics, the decrease or Cobb angle was most prominent in distraction than in deroation. Applying the rod derotation only was not effective in decrease of Cobb angle but just caused increase of At AR and rib hump. From the operative simulation, co-action or distraction and translation during rod insertion has major impact on Cobb angle decrease and maintenance of kyphosis. With rod rotation, Cobb angle decrease was obtained, but combined increase of AVAR and rib hump was simulation observed as well. The case of most extended instrumentation range with 60o rod rotation produced double decrease of Cobb angle, but the increase of rib hump and AYAR occurred corresponding1y. The optimum selection of fusion level was proved as one level less than inflection position of the thoracic spine curvature.
척추 측만증 교정 시 유합 범위에 따른 수술 후 의 효과를 분석하기 위하여 King-Moe type II 형태의 척추 측만증 환자를 대상으로 이에 대한 수학적 유한 요소 모델을 개발하였다. 유한 요소 모델을 이용하여 척추경 나사못을 이용한 고정 및 강봉 감염술 형태의 수술모사를 수행하였으며, 유합 범위를 각기 달리하여 수술 시뮬레이션 후의 척추계의 변화 즉 Cobb 각도, 첨추체 축회전, 흉추 후만각 그리고 늑골고의 변화를 정량적으로 계산하였다. 해석 결과 강봉 감염술의 경우에서 보다 강봉을 척추경 나사못에 연결시키는 과정에서 훨씬 더 많은 Cobb각도의 변화를 얻을 수 있었다. 강봉 감염술 과정에서는 약간의 Cobb각도 감소를 유발시킬 수 있었으나 오히려 척추체 축회전과 늑골 돌출고의 증가를 나타내었다 아울러 강봉과 척추경 나사못의 체결 과정이 척추 후만각 유지에도 큰 역할을 하고 있음을 알 수 있었다. 유합 범위를 변곡 발생 추체의 위치 보다 한 단계씩 길게(T4-12) 하여 60o의 강봉 감염술을 시행하였을 경우 Cobb 각도를 두 배 감소시킬 수 있었으나 급격한 늑골고와 첨추체 축회전량의 증가가 유발되었다. 해석 결과 유합 범위는 만곡 흠추체에서 변곡이 발생되는 위치 보다 한 레벨씩 작게 선정하는 것이 최적의 유합 범위임을 알 수 있었다.