Abstract
In this paper, we propose optimal and suboptimal serial code acquisition schemes for chip-asynchronous direct-sequence spread-spectrum systems. The conventional serial code acquisition scheme is to compare each value of correlator outputs with a threshold individually. However, such a scheme is optimum only under the chip-synchronous assumption which is actually very difficult to be held prior to acquisition at the receiver because the signal-to-noise ratios before despreading are very low. In this paper, an optimal serial code acquisition scheme is derived based on the maximum-likelihood criterion under the more realistic and general chip-asynchronous environments. A suboptimal scheme, which is simpler but yields comparable performance to the optimal one, is also derived based on the criterion of local detection power Numerical results show that, under the chip-asynchronous environments, both the optimal and suboptimal serial code acquisition schemes outperform the conventional serial code acquisition scheme.
이 논문에서는, 칩비동기 직접수열 대역확산 시스템을 위한 최적 및 준최적 직렬 코드 포착 기법을 제안한다. 기존의 직렬코드 포착 기법은 상관기 출력값 각각을 하나씩 차례대로 정해진 문턱값과 비교하는 방식이며, 이러한 방식은 칩동기 가정아래에서는 최적임이 알려져 있다. 하지만 역확산 이전에 이루어지는 코드 포착 과정에서는 각 칩의 신호대잡음비가 매우 낮기때문에 칩동기 가정이 만족되기 어렵다. 따라서 이 논문에서는 좀더 현실적이고 일반적인 칩비동기 환경을 생각하고 이를 위해 최대우도 기준에 바탕을 둔 최적 직렬 코드 포착 기법을 제안한다. 또한, 좀더 간단하면서도 최적 기법과 비슷한 성능을 지니는 준최적 기법을 국소 최적 검파 전력 기준에 바탕을 두고 제안한다. 마지막으로 수치 해석 결과를 통해, 제안한 최적 및 준최적 직렬 코드 포착 기법이 칩비동기 환경아래에서 기존의 직렬 코드 포착 기법보다 뛰어남을 보인다.