대한전기학회논문지:전기물성ㆍ응용부문C (The Transactions of the Korean Institute of Electrical Engineers C)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

$\alpha$-SiC-WC 전도성 세라믹 복합체의 특성에 미치는 무가압 Annealing 온도

Effect of Pressurless Annealing Temperature on the Properties of $\alpha$-SiC-WC Electroconductive Ceramic Composites.

  • 신용덕 (원광대 공대 전기전자 및 정보공학부) ;
  • 오상수 (원광대 대학원 전기공학) ;
  • 주진영 (한보 NISCO 기술연구소)
  • 발행 : 2004.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The composites were fabricated 61 vol.%$\alpha$-$\alpha$-SiC and 39vol.% WC powders with the liquid forming additives of 12wt% $Al_2$O$_3$＋Y$_2$O$_3$ by pressureless annealing at 1700, 1800, 190$0^{\circ}C$ for 4 hours. The result of phase analysis of composites by XRD revealed $\alpha$-SiC(2H), WC, and YAG(Al$_{5}$ Y$_3$O$_{12}$ ) crystal phase. The relative density, the flexural strength, fracture toughness and Young's modulus showed respectively the highest value of 99.4%, 375.76㎫, 5.79㎫ㆍm$\frac{1}{2}$, and 106.43㎬ for composite by pressureless annealing temperature 190$0^{\circ}C$ at room temperature. The electrical resistivity showed the lowest value of 1.47${\times}$10$^{-3}$ $\Omega$$.$cm for composite by pressureless annealing temperature 190$0^{\circ}C$ at $25^{\circ}C$. The electrical resistivity of the $\alpha$-SiC-WC composites was all positive temperature cofficient resistance (PTCR) in the temperature ranges from $25^{\circ}C$ to 50$0^{\circ}C$.

키워드

참고문헌

  1. Patricia A. Hoffman, 'Thermo Elastic Properties of Silicon Carbide-Titanium Diboride Particulate Composites', M. S Thesis, 1992
  2. Hideto Hashiguchi and Hisashi Kimugasa 'Electrical Resistivity of a-SiC Ceramics Added with NiO' J. Ceram. Soc. Japan, 102[2], pp. 160-'64, 1994 https://doi.org/10.2109/jcersj.102.160
  3. Yong-Deok Shin, Jin-Young Ju, Kwang-soo Choi, Snag-soo Oh, Je-Ho Seo' Effect of Annealing Temperature on the Propertiesof B-SiC-$TiB_2$ Electrocondutive Ceramic Composites by Spray Dry', Trans. KIEE, Vol. 52C, No. 8, pp. 335-341, 2003
  4. Do-Hyeong Kim and chong Hee Kim, 'Toughening Behavior of Silicon Carbide with Additions of Yttria and Alumina', J. Am. Ceram. Soc., Vol. 735, pp. 1431-34, 1990
  5. Seung Hyuk Yim, Yong Deok Shin and Joon Tae Song, 'The Properties of B-SiC-$TiB_2$ Electroconductive Ceramic Composites Densified by Liquid-Phase Sintering', Trans. KIEE, Vol. 49, No. 9, pp. 510-515, 2000
  6. Jie Zhang, Joong-Chai Jung, Jong-Hyeon Lee and Chang-Whan Won 'Synthesis of WC Powder by Process' J. Kor. Inst. Met. & Mater. Vol.38, No.5 (2000)
  7. M. Ramulu and M. Taya, 'EDM machinability of SiCw/A1 Composites' Journal of Materials Science. Vol.24, pp. 1103-1108, 1989 https://doi.org/10.1007/BF01148805
  8. A.G. Evans and T.R. Wilshaw 'Quasi-Static solid Particle Demage in Brittle Solids-1. Observation Analysis and Implication' Axta Matallurgica. Vol. 24, pp 939-956, 1976 https://doi.org/10.1016/0001-6160(76)90042-0
  9. Yong Deok Shin, 'Electric Discharge Machining of hot-Pressed SiC-ZrB2 Composites Ceramic', Trans. KIEE. Vol. 46, No. 7, pp. 1062-1067, 1997
  10. Wiliam D. Callister Jr., 'Materials Science And Engineering An Introduction', Fifth Edition, p.454-455, 2000
  11. Jurgen Rodel, 'Interaction Between Crack Deflection and Crack Bridging' Journal of the European Ceramic Society, 10, pp.143-150, 1992 https://doi.org/10.1016/0955-2219(92)90027-B
  12. Yong-Deok Shin, Jin-Young, 'Properties and Manufacture of the B-SiC-ZrB2 Composites Densified by Liquid-Phase Sintering' Trans. KIEE, Vol. 48C, No. 2, pp. 92-97, 1999