Abstract
The direction component uses mainly the sobel and FFT method. The sobel method is difficult to set representative direction when we wish to extract representative direction when we wish to extract representative direction component and the complicated processing process of sobel mask because same value appears in the low provision image or high provision image and we cannot accumulate tilt size in case of making accumulate after making unit vector to pixel. The method that uses FFT conversion for direction extraction is possible in case that ridge has correct direction specification and must use a special direction filter. After thinning the binary image to supplement above weak point in the paper, we extract direction component by pixel unit, and we extract the most direction components of pixel that exist in block of 8${\times}$8 pixels size as representative direction of ridge.
방향 성분은 소벨(sobel)과 FFT 방법 등을 주로 사용한다. 소벨을 이용한 방법은 소벨 마스크의 복잡한 처리 과정과 대표 방향 성분을 추출하고자 할 때 픽셀별로 단위 벡터를 만들어 누적시킬 경우 낮은 대비 영상이나 높은 대비 영상이나 같은 값이 나오므로 기울기 크기를 누적할 수 없어 대표 방향을 설정하기 어렵다. FFT를 변환을 이용한 방법은 융선이 정확한 방향 성분을 가지는 경우에만 방향성 추출이 가능하며 별도의 방향 필터를 사용해야 한다. 본 논문에서는 위의 단점을 보완하기 위하여 이진화 된 영상을 세선화 한 후 픽셀 단위로 방향 성분을 추출하며, 8${\times}$8 픽셀크기의 블록 내에 존재하는 픽셀이 가지는 방향 성분 중 가장 많은 방향 성분을 융선의 대표 방향으로 추출하는 새로운 방법을 제안한다.