참고문헌
- Andreopoulos, J., 1982, 'Measurements in a Jet-Pipe Flow Issuing Perpendicularly into a Cross Stream,' J. of Fluids Engineering, Vol. 104, pp. 493-499 https://doi.org/10.1115/1.3241892
- Leylek, J. H. and Zerkle, R. D., 1994, 'Discrete-Jet Film Cooling: A Comparison of Computational Results with Experiments,' J. of Turbomachinery, Vol. 116, pp. 358-368 https://doi.org/10.1115/1.2929422
- Cho, H. H. and Goldstein, R. J., 1995, 'Heat(Mass) Transfer and Film Cooling Effectiveness with Injection Through Discrete Holes: Part I -Within Holes and on the Back Surface,' J. of Turbomachinery, Vol. 117, pp. 440-450 https://doi.org/10.1115/1.2835680
- Cho, H. H. and Goldstein, R. J., 1995, 'Heat(Mass) Transfer and Film Cooling Effectiveness with Injection Through Discrete Holes: Part 11 -on the Exposed Surface,' J. of Turbomachinery, Vol. 117, pp. 451-460 https://doi.org/10.1115/1.2835681
- Lee, S. W., Park, S. W. and Lee, J. S, 2000, 'Flow Characteristics Inside Circular Injection Holes Normally Oriented to a Crossflow : Part I-Flow Visualization and Flow Data in the Symmetry Plane,' ASME Paper No. 2000-GT-256
- Muldoon, F. and Acharya, S., 1999, 'Numerical Investigation of the Dynamical Behavior of a Row of Square Jets in Crossflow over a Surface,' ASME Paper No. 99-GT-127
- Licu, D. N., Findlay, M. J., Gartshore, I. S. and Salcudean, M., 1999, 'Measurements of Heat Transfer Characteristics for Film Cooling Applications,' ASME Paper No. 99-GT-167
- Seung Goo Kang, Dong ho Rhee, Hyung Hee Cho, 2002, 'Heat/Mass Transfer and Flow Characteristics Within a Film Cooling Hole of Square Cross Section(I) - Effects of Blowing Ratio and Reynolds Number,' Transactions of the KSME(B), Vol. 26, No. 7, pp. 927-936
- Dong Ho Rhee, Seung Goo Kang, Hyung Hee Cho, 2002, 'Heat/Mass Transfer and Flow Characteristics Within a Film Cooling Hole of Square Cross Section(II) - Effects of Asymmetric Inlet Flow Condition,' Transactions of the KSME(B), Vol. 26, No. 7, pp. 937-944
- Hay, N. and Lampard, D., 1995, 'The Discharge coefficient of Flared Film Cooling Holes,' ASME Paper No. 95-GT-15
- Dong Ho Rhee, Byunggi Kim, Hyung Hee Cho, 1998, 'Characteristics of Heat/Mass Transfer and Film Cooling Effectiveness Around a Single Film Cooling Hole with Compound Injection Angles,' Transactions of the KSME(B), Vol. 22, No. 10, pp. 1434-1445
- Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Eckert, E. R. G., 1976, 'Analogies to Heat Transfer Processes,' in Measurements in Heat Transfer, ed. Eckert, E. R. G. and Goldstein, R. J., pp. 397-423, Hemisphere Pub., New York
- Kline, S. J. and McClinetock, F., 1953, 'Describing Uncertainty in Single Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8