A study on the design of band pass filter for wireless LAN using Defected Ground Structure

DGS를 이용한 무선랜 대역 통과 여파기의 설계에 관한 연구

  • Published : 2004.03.01

Abstract

In this paper, 2.4GHz WLAN BPF(Band Pass Filter) which has two DGS(Defected Ground Structure) unit cells was simulated and manufactured. To do this, a unit DGS resonator with resonant frequency is designed. Then the BPF for WLAN with the center frequency of 2.4GHz md the bandwidth of 200MHz is designed using two DGS resonator, finally this circuit is fabricated. We also proposed the equivalent circuit of the BPF employing two DGS resonator. The BPF with DGS was obtained experimental results with network analyzer Agilent 8510C. The measured result shows good agreement with simulated data. Experimental results show the center frequency of 2.45GHz, the insertion loss of 1.08dB, and the 3-dB bandwidth of 470MHz(19.5%). Acceding to the measured values, it is found that the fabricated DGS BPF is available for wireless LAN.

Keywords

References

  1. F. R. Yang, Y. Qian and T. Itoh, 'A Novel Uniplanar Compact PBG Structure for Filter and Mixer Applications', IEEE MTT-S Int. Microwave Symp. Dig., vol. 3, pp.912-922, June 1999 https://doi.org/10.1109/MWSYM.1999.779536
  2. J. S Park, J. S Yun, and D Ahn, 'A Design of the Novel Coupled-Line Bandpass Fitler Using Defected Ground Structure With Wide Stopband Performance', IEEE Trans. Microw. Theory Tech., vol. 50, NO.9, September 2002 https://doi.org/10.1109/TMTT.2002.802313
  3. D. M. Pozar, Microwave Engineering. Addison-Wesley , pp.422-473, 1998
  4. J. S Hong, M. J. Lancaster, Microstrip Filters for RF/Microwave Applications, Wiley-Interscience, pp.29-56, 2001