대한전기학회논문지:전기물성ㆍ응용부문C (The Transactions of the Korean Institute of Electrical Engineers C)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

외부부담이 전압변성기의 비오차와 위상각오차에 미치는 영향에 대한 연구

A Study on Ratio Error and Phase Angle Error Caused by an External Burden in Voltage Transformer

  • 정재갑 (한국표준과학연구원 전자기표준부 전기자기그룹) ;
  • 권성원 (한국표준과학연구원 전자기표준부 전기자기그룹) ;
  • 김규태 (한국표준과학연구원 전자기표준부 전기자기그룹) ;
  • 김명수 (한국표준과학연구원 전자기표준부)
  • 발행 : 2004.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A voltage transformer(VT) used for the estabilishment of high voltage national standard, has generally ratio error and phase angle error. Both errors in VT depend critically on values of external burden of VT used. Both ratio ewer and phase angle error in existence of the external burden is calculated. These calculated values are very well consistent with the experimental result. The principle and the measurement method of VT in our institute are also explained.

키워드

참고문헌

  1. J. L. Settles, W. R. Farber, and E. E. Connor, 'The analytical and graphical determination of complete potential transformer characteristics' IEEE Trans. Power Apparatus and Systems, vol. 79, No. 51, pp. 1213-1218, 1961
  2. IEEE Standard Requirements for Instrument Transformers, American National Standards Institute, ANSI/IEEE vol. C57, No. 13, pp. 45-46, 1978
  3. W. J. M. Moore, P. N. Miljanic 'The current comparator', Peter Peregrinus Ltd., London, United Kingdom, 1988
  4. William E. Anderson 'A Calibration Service for Voltage Transfomers and High-Voltage Capacitors' NBS Measurement Services Special Publication 250-33, 1988
  5. G. Jones, 'The Traceable Calibration of Voltage Transformers' NPL Special Publication, 1994
  6. Eddy So, Hans-Georg Latzel, 'NRC-PTB Intercomparison of Voltage Transformer Calibration Systems for High Voltage at 60 Hz, 50 Hz, and 16.66 Hz' IEEE Trans. on Instrumentation and Measurement, vol. 50, No. 2, pp. 419-421, 2001 https://doi.org/10.1109/19.918156