KIEE International Transaction on Electrical Machinery and Energy Conversion Systems

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

Construction and Characteristics of Single Phase Switched Reluctance Motor

  • Oh, Young-Woong (Dept. of Electrical and Electronic Engineering, Chungnam National University) ;
  • Lee, Eun-Woong (Dept. of Electrical and Electronic Engineering, Chungnam National University) ;
  • Lee, Jong-Han (Dept. of Electrical and Electronic Engineering, Chungnam National University) ;
  • Kim, Jun-Ho (Dept. of Electrical and Electronic Engineering, Chungnam National University)
  • 발행 : 2004.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The single phase switched reluctance motor (SRM) has many merits; simple structure and driving circuits, easy operation and speed control, and etc. This paper presents the torque characteristics of disk type single phase SRM by changing the salient pole lengths and pole arcs. The prototype single phase SRM has a three dimensional magnetic flux pattern because of its structure. That is, the radial and axial magnetic flux contributes to torque generation. Thus, 3D analysis is required for computation of its magnetic field. In this paper, 3D FEM is used for analyzing the magnetic flux distribution and magnetic co-energy.

키워드

참고문헌

  1. Bolton.H.R., and Pedder. D.A.G., 'Low-cost Reluctance Drive System for Low-power, Low-speed Application', IEE Conf. Publ.179, pp.88-92, 1979
  2. Chatratana. S., Bolton.H.R., and Pedder.D.A.G., 'Investigation into Small Single Phase Switched Reluctance Motors', Proceedings of IEE Conference on Small and Special Electrical Machines, pp.99-102, September 1981
  3. CompterJ.c., 'Microprocessor Controlled Single Phase Reluctance Motor', Proceedings of Drives/Motors/Controls. pp.64-68, October 1984
  4. Chan. C.C., 'Single-phase Switched Reluctance Motors', IEE Proceedings. Vol.134, pp.53-56, January 1987
  5. Lee J.H., Lee E.W., Lee DJ., ' 3D Finite Element Analysis of Disk Type Single Phase SRM Considering the Saturation', KIEE Summer Annual Conference, A, pp.325-327, 1998
  6. Lee J.H., Lee E.W., Oh Y.W., 'Manufacturing Prototype and Characteristics Analysis of Disk type Single Phase SRM by 3D Finite Element Method', The Transactions of KIEE, Vol. 48, B, No.6, pp.316-321, 1999. 6
  7. Lee J.H., Oh Y.w., Lee E.W., 'Characteristic Analysis and Prototype Manufacture of Axial Flux Single Phase Switched Reluctance Motor', ICEE'99, HongKong, Vol.2, pp.235-238, August, 1999
  8. Lee J.H., Oh Y.W., Lee E.W., 'Manufacturing Driver and Measuring Performance of Disk type Single Phase Switched Reluctance Motor(DSPSRM)', The Trans. of KIEE, Vol.49B, No.1, pp.15-19, 2000.1
  9. Horst G[1992] United States patent No.5 122697
  10. Lawrenson.PJ., StephensonJ.M., Blenkinsop.P.T., Corda.J., and Fulton.N.N., 'Variable-speed Switched Reluctance Motors', IEE Proc. B. Electr. Power, pp.253-265, Appl., 1980, 127, (4)
  11. Kim J.H., Lee s.w, Oh Y.w., 'Influence of Pole Arc and Salient Pole Length on Torque to Salient Pole Rotor Type Single Phase SRM', Paper of '01 KIEE EMECS Fall Annual Symposium, pp.107-109, 2001
  12. Miller TJ., 'Switched Reluctance Motors and their Control', Magma Physics Publishing and Claredon Press Oxford, 1993
  13. Kim J.H., Lee uw, Cho H.K., 'The Influence of the Starting Permanent Magnet on No_Load Speed of the Salient Pole Rotor type Single Phase SRM', Paper of '02 KIEE EMECS Fall Annual Symposium, pp.25-27, 2002