References
- Adrian R. J., 1991, 'Particle Imaging Techniques for Experimental Fluid Mechanics.' Annu. Rev. Fluid Mech., Vol. 23, pp. 201-304 https://doi.org/10.1146/annurev.fl.23.010191.001401
- Armstrong, N. W. H. and Bray, K. N. C., 1992, 'Premixed Turbulent Combustion Flow-field Measurement Using PIV and LST and Their Application to Flamelet Modeling of Engine Combustion,' SAE, No. 922322
- Buckley, P. L., Craig, R. R., Davis, D. L. and Schwartzkopf, K. G., 1983, 'The Design and Combustion Performance of Practical Swirless for Integral Rocket/Ramjets,' AIAA, 21(5), pp. 740-743
- Chang, T. P., 1985, 'Image Processing of Tracer Particle Motion as Applied to Mixing and Turbulent Flow,' Chemical Engineering Science, Vol. 40, No. 2
- Chaturvedi, M. C., 1963, 'Flow Characteristics of Axisymmetric Expansion,' Proceedings J. of the Hydraulics Division, ASCE, Vol. 89, No. HY3, pp. 61-92
- Chiger, N. A. and Yule, A. J., 'The Physical Structure of Turbulent Flame,' AIAA 1979-0217, pp. 1-8
- Choi, G. M. and Katsuki, M., 2001, 'Advanced low Nox Combustion Using Highly Preheated Air,' Energy conversion and Management, Vol. 42, pp. 639-652 https://doi.org/10.1016/S0196-8904(00)00074-1
- Gupta, A. K., Lilley, D. G. and Syred, N., 1984, Swirl Flows, Abacus Press, Turnbridge wells
- Hall, M. G., 1972, 'Vortex Breakdown,' Annual review of Fluid Mechanics 4, pp. 195-218 https://doi.org/10.1146/annurev.fl.04.010172.001211
- Hoffmann, S., Lenze, B. and Eickhoff, H., 1998, 'Results of Experiments and Models for Predicting Stability Limits of Turbulent Swirling Flames,' Journal of Engineering for Gas Turbines and Power, Transactions of the ASME, Vol. 120, No. 2, pp. 311-316 https://doi.org/10.1115/1.2818122
- Lee, S. G., Song, K. K. and Rho, B. J., 2002, 'Investigation of Turbulent Spray Disintegration Characteristics Depending on the Nozzle Configuration,' KSME (Int.), Vol. 16, No. 4, pp. 572-579
- Lee, S. J., 1999, PIV-Velocity Field Measurement, POSTECH
- Lee, S. N., Yoon, H. K. and Ryu, J. I., 1996, 'Flow Field Characteristics of a High Load Combustor,' KSME, pp. 58-63
- Lefebvre, A. H., 1983, Gas Turbine Combusion, Hemishere, Washington, DC
- Mathur, M. L. and Maccallum, N. R. L., 1976, 'Swirling Air Tests Issuing from Vane Swirlers,' J. of the Institute of Fuel, Vol. 41, pp. 238-240
- Ralph, A., Dalla, B. and Thomas, R. N., 1999, 'Application of Catalytic Combustion to a 1.5 MW Industrial Gas Turbine,' Catalysis Today, Vol. 47, Issues 1-4, pp. 369-375 https://doi.org/10.1016/S0920-5861(98)00319-8
- Ryan, B. W. and John, K. E., 2001, 'Structure of a Swirling, Recircilating Coaxial Free Jet and Its Effect on Particle Motion,' Int. J. Multiphase Flow 27, pp. 949-970 https://doi.org/10.1016/S0301-9322(00)00061-6
- Saad, A. A. 1998, 'Velocity Mesurements and Turbulence Statistics of a Confined Isothermal Swirling Flow,' Experimental Thermal and Fluid Science, Vol. 17, pp. 256-264 https://doi.org/10.1016/S0894-1777(97)10039-5
- Stephan, E. S. and Paul, O. H., 1995, 'CARS Temperature and LDA Velocity Measurements in a Turbulent, Swirling, Premixed Propane/Air Fueled Model Gas Turbine Combustor,' ASME 95-GT-64
- Turns, S. R., 2000, An Introduction to Combustion Concepts and Applications, McGRAW-HILL
- Yegian, D. T. and Cheng, R. K., 1998, 'Developement of a Lean Premixed Low-Swirl Burner for Low NOx Practical Applications,' Com. Sci. and Tech., Vol. 139, No. 1, pp. 207-238 https://doi.org/10.1080/00102209808952088