Flexural Vibration Analysis of a Sandwich Beam Specimen with a Partially Inserted Viscoelastic Layer

  • Park, Jin-Tack (Department of Mechanical Design and Producation, Graduate School, Hanyang University) ;
  • Park, Nak-Sam (Department of Mechanical Engineering, Hanyang University)
  • 발행 : 2004.03.01

초록

The flexural vibration characteristics of a sandwich beam system with a partially inserted viscoelastic layer were quantitatively studied using the finite element analysis in combination with the sine-sweep experiment. Asymmetric mode shapes of the flexural vibration were visualized by holographic interferometry, which agreed with those obtained by the finite element simulation. Effects of the length and the thickness of the partial viscoelastic layer on the system loss factor (η$\_$s/) and resonant frequency (f$\_$r/) were significantly large for both the symmetric and asymmetric modes of the beam system.

키워드

참고문헌

  1. Choi, N. S. and Park, J. I., 2001, 'Analysis of the Vibration Damping of Bonded Beams with a Single-Lap-Joint and Partial Dampers,' JSME International Journal Series C, Vol. 44, No. 2, pp. 350-359 https://doi.org/10.1299/jsmec.44.350
  2. Ditaranto, R. A., 1965, 'Theory of Vibratory Bending for Elastic and Viscoelastic Layered Finite-Length Beams,' Journal of Applied Mechanics, Vol. 32, pp. 881-886 https://doi.org/10.1115/1.3627330
  3. Johnson, C. D. and Kienholz, 1992, 'Finite Element Prediction of Damping in Structures with Constrained Viscoelastic Layers,' D.A., AIAA Journal, Vol. 20, pp. 1284-1290
  4. Kim, C. H. and Park T. H., 1992, 'Analytical and Experimental Study on the Damping of Vibrating Layered Plates Including the Effects of Shear and Thickness Deformation of the Adhesive Layer,' Journal of the Korean Society of Mechanical Engineers, Vol. 7, pp. 1224-1254
  5. Kohnke, P., 1995, Ansys Manual : Theory Reference-Release 5.3, Ansys Inc., Houston
  6. Lall, A. K., Asnani, N. T. and Nakra, B. C., 1988, 'Damping Analysis of Partially Covered Sandwich Beams,' Journal of Sound and Vibration, Vol. 123(2), pp. 247-259 https://doi.org/10.1016/S0022-460X(88)80109-3
  7. Paz, M., 1997, Structural Dynamics : Theory and Computation, Chapman & Hall, New York
  8. Rao, M. D. and Crocker, M. J., 1990, 'Analytical and Experimental Study of the Vibration of Bonded Beams with a Lap Joint,' Trans. of the ASME, J. of Vibration and Acoustics, Vol. 112, pp. 444-451 https://doi.org/10.1115/1.2930127
  9. Rao, M. D. and He, S., 1992a, 'Vibration Analysis of Adhesively Bonded Lap Joint, Part I : Theory,' Journal of Sound and Vibration, Vol. 152(3), pp. 405-416 https://doi.org/10.1016/0022-460X(92)90478-G
  10. Rao, M. D. and He, S., 1992b, 'Vibration Analysis of Adhesively Bonded Lap Joint, Part II : Numerical Solution,' Journal of Sound and Vibration, Vol. 152(3), pp. 417-425 https://doi.org/10.1016/0022-460X(92)90479-H
  11. Rao, M. D. and He, S., 1992c, 'Analysis of Natural Frequencies and Modal Loss Factors of Simply Supported Beams with Adhesively Bonded Double-Strap Joints,' Journal of Acoustical Society of America, Vol. 92(1), pp. 268-276 https://doi.org/10.1121/1.404290
  12. Saito, H. and Tani, H., 1984, 'Vibrations of Bonded Beams with a Single Lap Adhesive Joint,' Journal of Sound and Vibration, Vol. 92(2), pp. 299-309 https://doi.org/10.1016/0022-460X(84)90563-7
  13. Trompette, P., Boillot, D. and Ravanel, M. A., 1978, 'The Effect of Boundary Conditions on the Vibration of a Viscoelastically Damped Cantilever Beam,' Journal of Sound and Vibration, Vol. 60(3), pp. 345-350 https://doi.org/10.1016/S0022-460X(78)80112-6