Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Plastic η Eactors for J-Integral Testing of Double-Edge Cracked Tension(DE(T)) Plates

양측균열인장(DE(T)) 평판의 J-적분 시험을 위한 소성 η계수

  • 손범구 (성균관대학교 기계공학부) ;
  • 심도준 (성균관대학교 기계공학부) ;
  • 김윤재 (성균관대학교 기계공학부) ;
  • 김영진 (성균관대학교 기계공학부)
  • Published : 2004.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Detailed two-dimensional and three-dimensional finite element (FE) analyses of double-edge cracked tension (DE(T)) specimens are carried out to investigate the effect of the relative crack length and the thickness on experimental J testing schemes. Finite element analyses involve systematic variations of relevant parameters, such as the relative crack depth and plate width-to-thickness ratio. Furthermore, the strain hardening index of material is systematically varied, including perfectly plastic (non-hardening) cases. Based on FE results, a robust experimental J estimation scheme is proposed.

Keywords

References

  1. ASTM Standard, 1996, E 1739-96. Standard Test Method for J Integral Characterisation of Fracture Tougness, Annual Book of ASTM Standards(Section 3), 3.01, pp. 957-980; or ASTM Standard, E 1820-96, Standard Test Method for Measurement of Fracture Toughness. Annual Book of ASTM Standards,
  2. E 1820-96. Standard Test Method for Measurement of Fracture Toughness, Annual Book of ASTM Standards(Section 3), 03.01, pp. 981-1013.
  3. British Standard, 1991, BS 5447~1977. Methods of Test for Plane Strain Fracture Toughness $K_{IC}$of Metallic Materials;or British Standard, BS 7448-1991.Fracture Mechanics Toughness Tests, British Standards Institution London.
  4. British Standard, BS 7448~1991. Fracture Mechanics Toughness Tests, British Standards Institution, London.
  5. Kirk, M. T. and Dodds, R. H., 1993, 'J and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens,' Journal of Testing and Evaluation, Vol. 21, pp. 228-238. https://doi.org/10.1520/JTE11948J
  6. Wang,Y.Y.and Gordon, J.R., 1992, 'The Limits of Applicability of J and CTOD Estimation Procedures for Shallow-Cracked SENB Speciments,' In:Dawes MG, editor. Shallow Crack Fracture Mechanices, Toughness Test and Applications, Cambridge, U. K.
  7. Kim, Y. J.and Schwalbe, K. H., 2001, 'On The Sensitivity of J Estimation to Materials' Stress Strain Curves in Fracture Toughness Testing Using the Finite Element Method,' Journal of Testing and Evaluation, Vol. 29(1), pp. 18-30. https://doi.org/10.1520/JTE12387J
  8. Kim,Y.J.and Schwalbe, K.H., 2001, 'On Experimental J Estimation Equations Based on CMOD for SE(B) Specimens,' Journal of Testing and Evalwation, Vol. 29(1), pp. 67-71. https://doi.org/10.1520/JTE12393J
  9. Joyce,J.A., Hackett, E.M. and Roe, C., 1993, 'Effects of Crack Depth and Mode of Loading on the J-R Curve Behaviour of a High-Strength Steel,' In: Constraint Society for Testing and Materials, Philadelphia, pp. 239-263.
  10. Link, R.E. and Joyce, J.A., 1995, 'Experimental Investigation of Fracture Toughness Scaling Models,' In: Kirk M and Bakker Ad, editors. Constraint Effect in Fracture, ASTM STP 1244, American Society for Testing and Materials, Philadelphia, pp. 286-315.
  11. Shim, D.J. Jang,Y.K. Choi, J.B. and Kim,Y.J. Kim, C.M, 2001, 'A Study on the Fracture Behavior of a Two Dimensional Crack in Gas Pipelines Considering Constraint Effects,' Transaction of KSME(A), Vol. 25, No. 1, pp. 61-69.
  12. Kim, J.S., Choi, J.B. and Kim, Y.J., 2001, 'Evaluation for the Crack Tip Stress Distribution Considering Constraint Effects in the Reactor Pressure Vessel,' Transaction of KSME(A), Vol. 25, No. 4, pp. 756-763.
  13. Hancock, J.W., Reuter, W.G., and Parks, D.M., 1993, 'Constraint Effect in Fracture, ASTM STP 1171,Constraint and Toughness Parameterised by T.,' Hackett E.M, Schwalba K.H, Dodds R.H, editors. Constraint Effect in Fracture, ASTM STP 1171, American Society for Testing and Materials, Philadelphia, pp. 21-40.
  14. O'Dowd, N.P., Shih, C.F., 1991, 'Family of Crack-Tip Fields Characterised by a Triaxiality Parameter,' Journal of the Mechanics and Physics of Solids, Vol. 39, pp. 898-1015.
  15. Kim, Y.J., and Budden, P.J., 2001, 'Plastic ${\eta}$ factors of Homogeneous and Bi-material SE(T) Specimens for Toughness and Creep Crack Growth Testing,' Fatigue and Fracture of Engineering Materials and Structures, Vol.24(11), pp. 751-760. https://doi.org/10.1046/j.1460-2695.2001.00436.x
  16. EFAM GTP 94 The GKSS Testing Procedure for Determining the Fracture Behaviour of Materials, GKSS Report GKSS/94/E/60 Schwalbe,K.H.;Neale,B.K.;Heerens, J.
  17. Roos, E. Eisele, U. Silcher, H., 1993, 'Effect of Stress State on the Ductile Fracture Behaviour of Large-Scale Specimens,' In:Hackettt E M, Schwalbe, K.H, Dodds, R-H, ediots. Constraint Effect in Testing and Materials, Philadelphia, pp. 41-63.
  18. Tada, H., Paris, P. and Irwin, G., 1985, The stress analysis of cracks handbook, paris Production Inc., St. Louis, Missouri.
  19. ABAQUS, 2003, Standard/User's Manual Version 6.3, Hibbit. Karlsson & Sorensen, Inc, Pawtucket, RI, USA.
  20. Rice, J.R. Paris, P.C. and Merkle, J.G., 1973, 'Some Further Results of J-Integral Analysis and Estimates,' ASTM STP 536, American Society ofr Testing and Materials, Philadelphia, pp. 231-245.
  21. Sharobeam, M.H. and Landes, J.D, 1993, 'The Load Separation Criterion and $\eta_{pl}$Development in Precracked Specimen Test Results,' International Journal of Fracture, vol. 59, pp. 213-226.
  22. Wu, S.X., Mai, Y.W.and Cotterell, B., 1990, 'Plastic $\eta$-Factor $(\eta_p)$ of Fracture Specimens with Deep and Shallow Cracks,' International Journal of Fracture, Vol. 45, pp. 1-18. https://doi.org/10.1007/BF00012606
  23. Hutchinson, J.W., 1968, 'Singular Behaviour at the End of a Tensile Crack Tip in a Hardening Material,' Journal fo the Mechanics and Physics of Soilds, Vol. 16, pp. 13-31. https://doi.org/10.1016/0022-5096(68)90014-8
  24. Ewing, D.J.F.and Hill, R., 1967, 'The Plastic Constraint of V-Notched Tension Bars,' Journal of the Mechanics and Physics of Solids, Vol. 15, pp. 115-124. https://doi.org/10.1016/0022-5096(67)90021-X
  25. Ewing, D.J.F. and Spurr, R.J.D., 1974, 'The Yield Point Loads of Symmetrically Notched Metal Strips,' Journal of the Mechanics and Physics of Solids, vol. 22, pp. 37-46. https://doi.org/10.1016/0022-5096(74)90012-X
  26. Journal of the Mechanics and Physics of Solids v.22 The Yield Point Loads of Symmetrically Notched Metal Strips Ewing,D.J.F.;Spurr,R.J.D. https://doi.org/10.1016/0022-5096(74)90012-X