참고문헌
- Jeong, J. H., Shin, Y. J., Lee, E. S., Whang, K. H., 'Trends of Nanoimprint Lithography Technology,' J. of KSPE, Vol. 20, No. 3, pp. 15-22, 2003
- Sin, Y. J., Cho, J. D., Lee, E. S., 'Trends of Soft Lithography Technology,' J. of KSPE, Vol. 20, No. 4, pp. 5-11, 2003
- Menz, W., 'LIGA and Related Technologies for Industrial Application,' Sensor. Actuat. Apphys., Vol. 54, pp. 785-789, 1997 https://doi.org/10.1016/S0924-4247(97)80056-8
- Ashida, K., Morita, N., and Toshida, Y., 'Study on Nano-machining Process using Mechanism of a Friction Force Microscope,' JSME International Journal Series C, Vol. 44, No. 1, pp. 51-60, 2001 https://doi.org/10.1299/jsmec.44.244
- Ashida, K., Morita, N., and Toshida, Y., 'Study on Nano-machining Process using Mechanism of a Friction Force Microscope,' JSME International Journal Series C, Vol. 44, No. 1, pp. 51-60, 2001 https://doi.org/10.1299/jsmec.44.244
- Minne, S. C., Adams, J. D., Yaralioglu, G., Manalis, S. R., Atalar, A., and Quate, C. F., 'Centimeter Scale Atomic Force Microscope Imaging and Lithography,' Appl, Phys. Lett., Vol. 73, pp. 1742-1744, 1998 https://doi.org/10.1063/1.122263
- Chang, W. S., Shin, B. S., Whang, K. H., 'Nanoprobe Application Technologies,' J. of KSPE, Vol. 20, No. 3, pp. 5-14, 2003
- Hamamake, H., Ono, T., and Esashi, M., 'Fabrication of Self Supported Si Nano-Structure with STM,' Proc. IEEE MEMS'97, pp. 153-156, 1997 https://doi.org/10.1109/MEMSYS.1997.581791
- Snow, E. S., Campbell, P. M., 'Fabrication of Si Nanostructure with an Atomic Force Microscope,' Appl. Phys. Lett., Vol. 64, pp. 1932-1934, 1994 https://doi.org/10.1063/1.111746
- MTS, Nanoindenter Xp Manual, 2002
- Lee, J. W., Youn, S. W., Kang, C. G., 'Finite Element Analysis of Nano Deformation for the Hyper-Fine Pattern Fabrication by using Nanoindentation,' J. of KSPE, Vol. 20, No. 5, pp. 210-217, 2003
- Lee, J. W., Youn, S. W., Kang, C. G., 'Analysis of Material Deformation Behavior in Nanoindentation Process by using 3D Finite Element Analysis and its Experimental Verification,' Proceeding of the KSPE Spring Annual Meeting 2003, pp. 405, 2003
- Lu, Chung-Jen, Bogy, D. B., 'The Effect of Tip radius on Nano-indentation Hardness Tests,' Int. J. Solid Struct., Vol. 32, No. 12, pp. 1759-1770, 1995 https://doi.org/10.1016/0020-7683(94)00194-2
- Ged-el-Hak, M., The MEMS Handbook, CRC PRESS, pp. 18-11,12, 2001
- Bucaille, J. L., Felder, E., Hochstetter, G., 'Mechanical Analysis of the Scratch Test on Elastic and Perfectly Plastic Materials with the Three-dimensional Finite Element Modeling,' Wear, Vol. 249, pp. 422-432, 2001 https://doi.org/10.1016/S0043-1648(01)00538-5
- Holmberg, K., Laukkanen, A., Ronkainen, H., Wallin, K., Varjus, S., 'A Model for Stresses, Crack Generation and Frature Toughness Calculation in Scratched TiN-coated Steel Surfaces,' Wear, Vol. 254, pp. 278-291, 2003 https://doi.org/10.1016/S0043-1648(02)00297-1
- Lichnichi, M., Lenardi, C., Haupt, J., Vitali, R., 'Simulation of Berkovich Nanoindentation Experiments on Thin Films using Finite Element Method,' Thin Solid Films, Vol. 333, pp. 278-286, 1998 https://doi.org/10.1016/S0040-6090(98)01263-2
- Hibbitt, Karlsson and Sorensen, 'ABAQUS Standard/Explict rel. 6.2,' 2001