Partial Discharge Properties of PET Film with Carbon Black

  • Lee, Young-Hwan (School of Electrical and Electronic and Information Engineering, Wonkwang University) ;
  • Lee, Jong-Chan (Erik Jonsson School of Engineering and Computer Science. UTD) ;
  • Park, Yong-Sung (School of Electrical and Electronic and Information Engineering, Wonkwang University) ;
  • Park, Dae-Hee (School of Electrical and Electronic and Information Engineering, Wonkwang University)
  • 발행 : 2004.02.01

초록

This paper presents an investigation of the phase-resolved partial discharge (PD) pattern of PET (Poly Ethylene Telephthalate) films with carbon black particles. The phase-resolved PD pattern and statistical parameter from PET samples according to the number of included semiconductor particles were measured. The measurement system consisted of a conventional PD detector using a digital signal processing technique. The partial discharge patterns of the PET films that include the semiconductor particles were investigated to simulate an actual situation that may exist in the cable. In addition, difference of PD patterns between semiconducting particles in PET films and artificial voids was studied. The relationship between the numbers of semiconductor particles in PET films was discussed through the difference of Ψ-q-n distribution and statistical analysis.

키워드

참고문헌

  1. Benny Thomas, 'Partial Discharge Degradation and Breakdown Studies in Polypropylene Films', 1996 IEEE International Symposium on Electrical Insulation, pp.521-524 (1996)
  2. A. Cavallini et al., 'A New Approach to the Diagnosis of Solid Insulation Systems Based on PD Signal Interface', IEEE Electrical Insulation Magazine, Vol. 19, No.2, pp. 23-30 (2003) https://doi.org/10.1109/MEI.2003.1192033
  3. Tamon Ozaki,'A Partial Discharge Behavior of Piled PET Films', 1995 IEEE International Symposium on Electrical Insulating Material, Tokyo, Japan, pp. 459-462(1995)
  4. Kaori Nakao, Takeshi Kondo, Yasuo Suzuoki, Teruyoshi Mizutani, '$\psi$-q-n Patterns and Current Shapes of Partial Discharge in Void', 1998 Asian International Conference on Dielectric Electrical Insulation and the 30th Symposium on Electrical Insulating Materials, Toyohashi, Japan (1998).
  5. B.A. Fruth, DW. Gross, 'Partial Discharge Signal Conditioning Techniques for On-Line Noise Rejection and Improvement of Calibration', 1996 IEEE International Symposium on Electrical Insulation, pp. 397-400(1996)
  6. Lutz Niemeyer, 'A Generalized Approach to Partial Discharge Modeling', IEEE Transaction on Dielectrics and Electrical Insulation, Vol. 2, No.4, pp. 510-528(1995) https://doi.org/10.1109/94.407017
  7. F. H. Kreuger, 'Partial Discharge Detection in High Voltage Equipment', Butteworths, London (1989)