Restorative Dentistry and Endodontics

The Korean Academy of Conservative Dentistry (대한치과보존학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of the curing time for the adhesive on the oxygen-inhibited layer thickness and the shear bond strength to dentin

광조사 시간이 접착제의 표면 미중합층의 두께와 전단접착강도에 미치는 영향에 관한 연구

  • Choi, Yong-Hoon (Department of Conservative Dentistry ＆ Dental Research Institute, College of Dentistry, Seoul National University) ;
  • Bae, Ji-Hyun (Department of Conservative Dentistry ＆ Dental Research Institute, College of Dentistry, Seoul National University) ;
  • Son, Ho-Hyun (Department of Conservative Dentistry ＆ Dental Research Institute, College of Dentistry, Seoul National University) ;
  • Lee, In-Bog (Department of Conservative Dentistry ＆ Dental Research Institute, College of Dentistry, Seoul National University) ;
  • Um, Chung-Moon (Department of Conservative Dentistry ＆ Dental Research Institute, College of Dentistry, Seoul National University) ;
  • Baek, Seung-Ho (Department of Conservative Dentistry ＆ Dental Research Institute, College of Dentistry, Seoul National University) ;
  • Kim, Oh-Young (Department of Polymer Science and Engineering, Dankook University) ;
  • Kim, Chang-Keun (Department of Chemical Engineering, Chung-ang University) ;
  • Cho, Byeong-Hoon (Department of Conservative Dentistry ＆ Dental Research Institute, College of Dentistry, Seoul National University)
  • 최용훈 (서울대학교 치과대학 치과보존학교실) ;
  • 배지현 (서울대학교 치과대학 치과보존학교실) ;
  • 손호현 (서울대학교 치과대학 치과보존학교실) ;
  • 이인복 (서울대학교 치과대학 치과보존학교실) ;
  • 백승호 (서울대학교 치과대학 치과보존학교실) ;
  • 엄정문 (서울대학교 치과대학 치과보존학교실) ;
  • 김오영 (단국대학교 고분자공학과) ;
  • 김창근 (중앙대학교 화학공학과) ;
  • 조병훈 (서울대학교 치과대학 치과보존학교실)
  • Published : 2004.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Objectives : This study investigated the hypothesis that increasing light-curing time would leave the oxygen-inhibited layer (OIL) of the adhesive thinner, and in turn, result in lower shear bond strength (SBS) than those obtained by the routine curing procedures. Methods：120 human extracted posterior teeth were randomly divided into three groups for bonding with three adhesives：All Bond 2/sup (R)/, One Step/sup (R)/, and Adper Prompt/sup (R)/. They were subsequently divided into four subgourps with different light-curing time (10, 20, 30 and 60s). The assigned adhesives were applied on superficial occlusal dentin according to the manufacturer's instructions and cured with one of the four curing times. Composite resin cylinder, 2.35㎜ in diameter, were built on the cured adhesive and light-cured for 40s. SBS were measured after 24h from the bonding using a universal testing machine (crosshead speed 1.0 ㎜/min). The relative thickness of the OIL and the degree of conversion (DC) were determined from the adhesive on a slide glass using FT-NIR in an absorbance mode. Data were analysed with One-way ANOVA and Duncan's multiple test (p〈0.05), Results：With increasing cure time, although there were no significant difference in th SBS of One-step and Adper Prompt (p〉0.05), those of All Bond 2 decreased significantly (p〈0.05). The relative thicknesses of the OIL on each adhesive were not affected by the cure time (p〉0.05). Although the DC of All-Bond 2 were statistically not different with increasing cure time (p〉0.05), those of One-Step and Adper Prompt showed an increasing trends with increasing cure time (p〈0.05). Conclusions：Increasing light-curing time did not affect on the relative thickness of the OIL of the adhesives, and in turn, on the SBS to dentin.

본 연구는 광중합형 상아질 접착제에서 광조사 시간의 증가가 접착제 표면의 미중합층에 대한 영향과 그에 따른 전단접착강도에 대해 연구하고자 120개의 치아를 아크릴 몰드에 식립한 후 상아질이 노출되도록 연마하였다. 3종류의 접착제 〔All Bond2 (AB2), One-Step (OS) and Adper Prompt (AP)〕를 40개 치아에 제조사의 지시대로 도포한 후 각각 다른 광조사 시간 (10, 20, 30 and 60sec)동안 광조사 하고 복합레진을 접착한 24시간 후 전단접 착강도를 측정하였다. 미중합층의 두께와 중합률은 슬라이드 글라스와 FT-NIR을 이용하여 FT-NIR spectrum에서의 peak height를 비교 측정하여 다음과 같은 결론을 얻었다. 1. 전단접착강도에서 AB2는 20초 이후 감소하고, AP는 30초까지 증가하였으며,OS는 차이를 보이지 않았다. 2. 미중합층 두께는 3가지 접착제 모두 유의성 있는 차이를 보이지 않았다. 3. 중합률에서 OS는 10초와 나머지군 사이에 유의성 있는 차이를, AP는 60초에서 유의성 있게 증가되고, AB2의 경우 차이를 나타내지 않았다.

Keywords

References

  1. Chappell FP, Cobb CM, Spencer P, Eick JD. Dentinal tubule anastomosis : a potential factor in adhesive bonding? J Prosthet Dent 72(2) :183 188, 1994 https://doi.org/10.1016/0022-3913(94)90078-7
  2. Nakabayashi N, Kojima K, Masuhara E. The promotion of adhesion by the infiltration of monomers into tooth substrates. J Biomed Mater Res 16:265 273, 1982 https://doi.org/10.1002/jbm.820160307
  3. Perdigao J , Lopes M, Geraldi S, Lopes GC, Garcia Godoy F. Effect of a sodium hypochlorite gel on dentin bonding. Dent Mater 16:311 323, 2000 https://doi.org/10.1016/S0109-5641(00)00021-X
  4. Platt JA, Almeida J, Gonzalez Cabezas C, Rhodes B, Moore BK, The effect of double adhesive application on the shear bond strength to dentin of compomers using three one bottle adhesive systems. Oper Dent 26:313 317, 2001
  5. Swift EJ, Wilder AD, May KN, Waddell SL. Shear bond strengths of one bottle dentin adhesives using multiple applications. Oper Dent 22:194 199, 1997
  6. Venz S. Dickens B. Modified surface active monomers for adhesive bonding to dentin. J Dent Res 72:582 586, 1993 https://doi.org/10.1177/00220345930720030501
  7. Zheng L, Pereira PN, Nakajima M, Sano H, Tagami J. Relationship between adhesive thickness and microtensile bond strength. Oper Dent 26(1) :97 104, 2001
  8. Uno S, Finger WJ. Function the hybrid zone as a stress absorbing layer in resin dentin bonding Quintessence Int 26(10):733 738, 1995
  9. Yoshiyama M, Sano H, Ebisu S, Tagami J, Ciucchi B, Carvalho RM. Johnson MH, Pashley DH, Regional strengths of bonding agents to cervical sclerotic root dentin. J Dent Res 75(6) :1404 1413, 1996 https://doi.org/10.1177/00220345960750061201
  10. Lundin SA Koch G. Cure profiles of visible light cured class II composite restoratives in vivo and in vitro. Dent Mater 8:7 9. 1992 https://doi.org/10.1016/0109-5641(92)90045-E
  11. Eliades GC, Vougiouklakis GJ, Caputo AA, Degree of double bond conversion in light curd composites. Dent Mater 3:19 25, 1987 https://doi.org/10.1016/S0109-5641(87)80055-6
  12. Feuacane JL. Greener EH. The effect of resin formulation on the degree of conversion and mechanical properties of dental restorativeresins. J Biomed Mater Res 20:121131. 1986 https://doi.org/10.1002/jbm.820200111
  13. Cho BH. Dickens SH. Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength. Dent Mater in press, 2004 https://doi.org/10.1016/S0109-5641(03)00071-X
  14. Choi KK, Condon J R, Ferracane JR. The effects of adhesive thickness on polymerization contraction stres: of composite. J Dent Res 79 :812 817, 2000 https://doi.org/10.1177/00220345000790030501
  15. Koike T, Hasegawa T, ltoh K, Yukitani W, Yamashita T, Wakumoto S, Hisamitsu H. Effect of multiple application of a dentin adhesive on contraction gap width of a resin based composite. Am J Dent 15(3):159 163, 2002
  16. Van Meerbeeek, Willems G, Celis JP, Roos JR, Braem M, Lambrechts P, Vanherle G. Assessment by nano indentation of the hardness and elasticity of the resin dentin bonding area. J Dent Res 72:1434 1442, 1993 https://doi.org/10.1177/00220345930720101401
  17. Tassery H, de Donato F, Barres O, Dejou J. In vitro assessment of polymerization procedures in class II restorations: sealing, FTlR, and microhardness evaluations. J Adhes Dent 3(3) :247 255, 2001
  18. Ruyter IE. Unpolyrηerized surface layers on sealants. Acta Odontol scand 39 (1):27 32, 1981 https://doi.org/10.3109/00016358109162255
  19. Boyer, DB, Chan, KC, Torney, DL. Build up and repair of light cured composites: bond strength. J Dent Res 63:1241 1244, 1984 https://doi.org/10.1177/00220345840630101501
  20. Rueggeberg FA, Margeson DH. The effect of oxygen inhibition on an unfilled/filled composite system. J Dent Res 69(10):1652 1658, 1990 https://doi.org/10.1177/00220345900690100501
  21. Vankerckhoven H, Lambrechts P, van Beylen M, Davidson CL, Vanherle G. Unreacted methacrylate groups on the surfaces of composite resins. J Dent Res 61(6);791 795, 1982 https://doi.org/10.1177/00220345820610062801
  22. Lovell LG, Lu H, Elliott JE, Stansbury JW, Bowman CN. The effect of cure rate on the mechanical properties of dental resins. Dent Mater 17:504 511, 2001 https://doi.org/10.1016/S0109-5641(01)00010-0
  23. Dickens SH. Milos MF. Relationship of dentin shear bond strengths to different laboratory test designs. Am J Dent 15(3) :185 192, 2002
  24. Finger WJ, Lee KS, Podszun W. Monomers with low oxygen inhibition as enamel/dentin adhesives. Dent Mater 12(4): 256 261, 1996 https://doi.org/10.1016/S0109-5641(96)80032-7
  25. Lovell LG, Newman SM, Bowman CN. The effects of light intensity， temperature， and comonomer compositetionon the polymerization behavior of dimethacrylate dental resins. J Dent Res 78(8):1469 1476, 1999 https://doi.org/10.1177/00220345990780081301
  26. Stansbury JW, Dickens SH. Determination of double bond conversion in dental resins by near infrared spectroscopy. Dent Mater 17(1):71 79, 2001 https://doi.org/10.1016/S0109-5641(00)00062-2
  27. Peutzfeldt A, Asmusen E. The effect of postcuring on quantity of remaining double bonds, mechanical properties. and in vitro wear of two resin compoites . J Dent 28(6):447 452, 2000 https://doi.org/10.1016/S0300-5712(00)00021-X
  28. Palin WM, Fleming GJ, Trevor Burke FJ, Marquis PM, Randall RC. Monomer conversion versus flexure strength of a novel dental composite. J Dent 31(5): 341 351, 2003 https://doi.org/10.1016/S0300-5712(03)00050-2