참고문헌
- Mitsuya, Y., Abe, T. and Matsunaga, S., 1993, 'Novel Mechanism of Self-Injecting Magnetic Fluid Seal Applying Switch of Magnetic Force Direction on Yoke Surface,' J. Magn. Magn. Mater., Vol. 122, pp. 415-419 https://doi.org/10.1016/0304-8853(93)91122-N
- Mitsuya, Y., Tomita, K. and Hosoya, M., 1993, 'Experimental Study on Splashing Characteristics of Magnetic Fluid in a Magnetic Fluid Seal,' J. Magn. Magn. Mater., Vol. 122, pp. 420-423 https://doi.org/10.1016/0304-8853(93)91123-O
- Vislovich A. N., Medvedev, V. F., Dmitrichenko, A. S., Bondarenko, G A. and Morozov, V. N., 1993, 'A Magnetic Fluid Gate as a New Element in Sealing Technology,' J. Magn. Magn. Mater., Vol. 122, pp. 411-414 https://doi.org/10.1016/0304-8853(93)91121-M
- Fukuda, H., Ueno, K., Kamiyama, S. and Oyama, T., 1998, 'Study on Active Damper with a Magnetic Fluid,' Int. J. JSME, B, Vol. 41, No.4
- Kamiyama, S., 1999, 'Appications of Oscillatory Flow of Magnetic Fluid as Active Damper and Actuator,' Int. J. Modern Physics, B, Vol. 13, No. 14, 15 and 16, pp. 2213-2220 https://doi.org/10.1142/S0217979299002332
- Seo, J. W. and Park, S. J., 1999, 'An Experimental Study Light Modulator Using Magnetic Fluid for Display Application,' J. Magn. Magn. Mater., Vol. 192, pp. 499-504 https://doi.org/10.1016/S0304-8853(98)00532-0
- Umehara, N. and Kato, K., 1993, 'Fundamental Properties of Magnetic Fluid Griding with a Floating Polisher,' J. Magn. Magn. Mater., Vol. 122, pp. 428-431 https://doi.org/10.1016/0304-8853(93)91125-Q
- Bashtovoi, V. G, Challant, G and Volkova, O. Yu., 1993, 'Boiling Heat Transfer in Magnetic Fluids,' J. Magn. Magn. Mater., Vol. 122, pp. 305-308 https://doi.org/10.1016/0304-8853(93)91097-Q
- Calarasu, D., Cotae, C. and Olaru, R., 1999, 'Magnetic Fluid Brake,' J. Magn. Magn. Mater., Vol. 201, pp. 401-403 https://doi.org/10.1016/S0304-8853(99)00111-0
- Jeon, D. Y., Park, C. H. and Yoo, J. Y., 1998, 'Semi-Active Vibration Control using an MR Damper,' J. Cont. Automat. Syst., Vol. 4, No.1, pp. 26-31
- Hong, S. R. and Choi, S. B., 1999, 'Performance Comparison Between ER and MR Clutches with Same Gap Size,' J. Korean Soc. Mech. Eng.(Part A),Vol. 23, No.6, pp. 1055-1064
- Kim, J. H. and Oh, J. H., 2000, 'A Study on the Design of Valve Mode MR Damper Using Permanent Magnet,' J. Korean Soc. Precision Eng., Vol. 17, No. 10, pp. 69-76
- Nam, M. H. 2000, 'Performance Characteristics of Seat Damper Using MR Fluid,' J. Korean Soc. Mach. Tool Eng., Vol. 9, No.5, pp. 127-134
- Lee, W. S., Kim, T. G, Hur, N. K. and Jeon, D. Y., 2000, 'Design Analysis and Experimental Evaluation of an MR Fluid Clutch,' J. Korean Soc. Mech. Eng., Vol. 24, No.8, pp. 2143-2150
- Kim, K. D., Sim, W. C., Jeon, D. Y. and Choi, B. K., 2000, 'A Controllable Micro Damper Using MagnetoRheological Fluids,' J. Korean Soc. Precision Eng., Vol. 17, No.8, pp. 41-45
- Rosensweig, R. E., 1997, Ferrohydrodynamics, Dover Publications, Inc., Mineola, New York
- Ginder, J. M. and Ceccio, S. L., 1995, 'The Effect of Electrical Transients on the Shear Stresses in Elctrorheological Fluids,' J. Rheology, Vol. 39, No.1, pp.211-234 https://doi.org/10.1122/1.550682
피인용 문헌
- Study of Natural Convection of Magnetic Fluid in Cubic Cavity vol.37, pp.7, 2013, https://doi.org/10.3795/KSME-B.2013.37.7.637