The Journal of Korean Society for Radiation Therapy (대한방사선치료학회지)
- Volume 16 Issue 2
- /
- Pages.43-61
- /
- 2004
- /
- 1598-8449(pISSN)
Customer Acceptance Procedure for Clinac (21EX-Platinum)
- Hong, Dong-Ki (Dept. Radiation Oncology, Asan Medical Center) ;
- Lee, Woo-Seok (Dept. Radiation Oncology, Asan Medical Center) ;
- Kwon, Kyung-Tae (Dept. Radiation Oncology, Asan Medical Center) ;
- Park, Kwang-Ho (Dept. Radiation Oncology, Asan Medical Center) ;
- Kim, Chung-Man (Dept. Radiation Oncology, Asan Medical Center)
- 홍동기 (아산재단 서울아산병원 방사선종양학과) ;
- 이우석 (아산재단 서울아산병원 방사선종양학과) ;
- 권경태 (아산재단 서울아산병원 방사선종양학과) ;
- 박광호 (아산재단 서울아산병원 방사선종양학과) ;
- 김정만 (아산재단 서울아산병원 방사선종양학과)
- Published : 2004.09.01
Abstract
Purpose : For qualify improvement in radiotherapy, it is important to set up and evaluate equipment (linac) accurately. In addition, technicians are needed to be fully aware of the equipment's detailed quality and its manual. Therefore, the result of ATP is evaluated and introduced, in order that the technicians are skilled by participating in quality assurance (QA) and understanding the quality of the equipment before clinical use. Method and Material : QA for LINAC 21EX (Varian, US) was done with suppliers its procedure was divided into radiation survey, mechanical test, radiation isocenter test, bean performance, dosimetry, and enhanced dynamic wedge and using X-omat film (Kodak), multidata, densitometer, and electrometer. QA of MLC (Millennium, 120 leaf) attached to LINAC and EPID (Portal vision) were done separately. Result : The leakage dose by survey meter was below the tolerance. In mechanical test, collimater, gantry, and couch rotation were less than 1mm, and the angles were
목적 : 환자의 치료에 있어서 정확한 장비의 설치와 성능 평가는 치료의 질을 향상시키는데 중요한 요소라고 할 수 있으며 사용자가 장비의 특성과 사용 방법을 숙달하고 업무를 수행하는 것이 매우 중요하다고 생각한다. 그러므로 방사선 치료기를 설치하고 방사선 치료를 하기 전에 사용자가 직접 장비의 설치와 성능 평가에 참여하고 특성을 파악하여 이해하는 것이 필요하다. 본 연구에서는 CAP의 과정과 성능 평가결과를 소개하고자 한다. 대상 및 방법 : 선형가속기 21EX(varian, USA)를 대상으로 설치 시부터 성능 검사까지 전 과정을 평가하였고 성능평가는 크게 radiation survey, mechanical test, radiation isocenter test, beam performance, dosimetry, enhanced dynamic wedge로 구분하여 X-omat film(kodark), 선량 측정 장비(multidata, densitometer, electrometa)를 이용하여 실시하였다. 또한 선형가속기에 부착된 MLC(millenium, 120leaf)와 EPID(portal vision)의 성능 평가는 별도로 실시하였다. 결과 : Survey meter를 이용하여 측정한 leakage는 허용 범위 이하의 선량이 검출되었고 mechanical test에서 collimator, gantey, couch rotation은 1mm 이하였고 육안으로 평가한 angle은 digital이
Keywords