DOI QR코드

DOI QR Code

Roles of Bearing Angle in Bond Action of Reinforcing Bars to Concrete

  • Choi OanChul (Dept. of Architectural Engineering, Soong Sil University)
  • Published : 2004.10.01

Abstract

The ribs of deformed bars can split the cover concrete by wedging action or shear off the concrete in front of the ribs. As slip of deformed bars increases, the rib face angle is flattened by the crushed concrete wedge, which reduces the rib face angle to a smaller bearing angle. The roles of bearing angle are explored to simulate this observation. Analytical expressions to determine bond strength for splitting and pullout failure are derived, where the bearing angle is a key variable. As the bearing angle is reduced, splitting strength decreases and shearing strength increases. When splitting strength becomes larger than shearing strength, the concrete key is supposed to be sheared off and the bearing angle is reduced with decreasing the splitting strength. As bars slip, bearing angle decreases continually so that splitting bond strength is maintained to be less than shearing bond strength. The bearing angle is found to play a key role in controlling the bond failure and determination of bond strength of ribbed reinforcing steel in concrete structures.

Keywords

References

  1. Rehm, G., 1957, 'The fundamental Law of Bond,' RILEM-Symposium on Bond and Crack Formation in Reinforced Concrete, Vol.II, Stockholm, 491pp
  2. Lutz, L. A. and Gergely, P., 1967, 'Mechanics of Bondand Slip of Deformed Bars in Concrete,' ACI Journal, Proceedings, Vol.64, No.11, pp.711-721
  3. Tepfers, R., 1979, 'Cracking of Concrete Cover Along Anchored Deformed Reinforcing Bars,' Magazine ofConcrete Research, Vol.31, No.106, pp.3-12 https://doi.org/10.1680/macr.1979.31.106.3
  4. Cairns, J. and Jones, K., 1996, 'An Evaluation of theBond-Splitting Action of Ribbed Bars,' ACI MaterialJournal, Vol.93, No.l, pp.10-19
  5. Eligehausen, R., Popov, E. P, and Bertero, V. V., 'Local Bond Stress-slip Relationships of Deformed Bars under Generalized Excitations,' Earthquake Engineering Re-search Center, Report No. UCB/EERC-83/23, UniversityofCaliformia, Berke1ey, 1983, 169pp
  6. Darwin, D. and Graham, E. K., 'Effect of DeformationHeight and Spacing on Bond Strength of Reinforcing Bars,' ACI Structural Journal, Vol.90, No.6, 1993, pp.646-657
  7. Hamad, B. S., 'Bond Strength Improvement of Reinforc-ing Bars with Specially Designed Rib Geometries,' ACIStructural Journal, Vo1.92, No.1, 1995, pp.3-13
  8. Tholen, M. L. and Darwin, D., 'Effects of Deformation Properties on the Bond of Reinforcing Bars' SM Report No. 42, University of Kansas, 1996, 370pp
  9. Cox, J. V. and Yu, H., 'Radial Elastic Stiffness Associ-ated with Bond between Steel Bars and Concrete,' ACI Structural Journal, Vol. 98, No.1, 2001, pp.16-28
  10. Choi, O. C. and Lee, W. S., 'Interfacial Bond Analysis of Deformed Bars to Concrete,' ACI Structural Journal, Vol.99, No.6, 2002, pp.750-756
  11. Gambarova, P. G. and Rosati, G. P., 'Bond and Splitting in Bar Pull-out: Behavioral Laws and Concrete Cover Role,' Magazine of Concrete Research, 49, No.179, 1997,pp.99-110 https://doi.org/10.1680/macr.1997.49.179.99
  12. Birkeland, P. W. and Birkeland, H. W., 'Connections inPrecast Concrete Construction,' Journal of American Concrete Institute, Vo1.63, No.3, 1966, pp.345-368

Cited by

  1. Analytical modelling of a three-layer wall system of strengthening for large-panel slab buildings by means of bonded anchors vol.174, pp.2261-236X, 2018, https://doi.org/10.1051/matecconf/201817404012