Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Strength Model for Eccentric Shear of Flat Plate-Column Connections under Unbalanced Moment

불균형 휨모멘트를 받는 플랫플레이트-기둥 접합부의 편심전단강도

  • Published : 2004.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Many experiments have been performed to investigate eccentric shear strength and unbalanced moment-carrying capacity of flat plate-column connections under combined gravity and lateral load. However, each existing experiment used different test setup, and the shear strength of the connection was different depending on the test setup. Current design methods which were based on the experimental results might not accurately explain the shear strength of the flat plate. In a companion study, based on results of nonlinear finite element analyses, an alternative design method for the plate-column connection was developed. However, in this method, eccentric shear strength of the connection which was required for assessing unbalanced moment-carrying capacity was evaluated by an empirical formula. In the present study, a theoratical approach using Rankine's failure criterion was attemped to investigate failure mechanism of the eccentric shear. Based on the results, an improved strength model of the eccentric shear was developed, and it was verified by comparison with the existing experimental results. By means of the strength model, the design method developed in the companion study was re-verified.

불균형 휨모멘트를 재하받는 플랫플레이트-기둥 접합부의 편심전단강도와 모멘트강도를 규명하기 위해 그동안 많은 실험연구가 수행되어 왔다. 기존 실험들은 서로 다른 실험방식을 사용하고 있는데, 접합부의 전단강도는 실험방식에 따라 차이가 있는 것으로 나타났다. 따라서 기존 실험에 근거하여 개발된 현행 설계기준들은 플랫플레이트의 강도를 정확히 설명하고 있지 못한 실정이다. 선행 연구에서는 연속 플랫플레이트에 대한 비선형 유한요소해석에 근거하여, 슬래브-기둥 접합부에 패한 새로운 설계방법을 개발하였다. 그러나 제안된 설계방법에서는 휨모멘트 강도산정에 필요한 접합부 편심강도를 경험식에 의존하여 산정하고 있다. 본 연구에서는, 접합부 파괴 메카니즘을 분석하기 위해서, Rankine 재료파괴기준을 이용하는 이론적인 접근법을 채택하였다. 분석결과에 근거하여 개선된 편심전단강도모델이 개발되었고, 기존 실험과의 비교를 통해 검증되었다. 개발된 강도식을 이용하여, 선행연구에서 개발된 설계방법을 재검증하였다.

Keywords

References

  1. 한국콘크리트학회, '콘크리트구조설계기준', 한국콘크리트학회, 1999
  2. American Concrete Institute, 'Building Code Requirements for Structural Concrete' ACI 318-02. American Concrete Institute, 2002, pp.184-186, 213-232, 337-342
  3. Elstner, R. C. and Hognestad, E., 'An Investigation of Reinforced Concrete Slabs Failing in Shear,' Mineographed Report, University of Illinois, Departmsnt of Theoretical and Applied Mechanics, Mar. 1953
  4. 최경규, 박홍근, '플랫플레이트-기둥 접합부의 뚫림전 단강도', 콘크리트학회 논문집, 제16권 2호, 2004
  5. Luo, Y. H. and Durrani, A. J., 'Equivalent Beam Model for Flat-Slab Buildings-Partl: Interior Connections,' ACI Structural Journal, Vo1.92, No.l, Jan.-Feb. 1995, pp.115~124
  6. 최경규, 박홍근, '불균등 휭모멘트를 받는 플랫플레이트- 기둥 접합부의 강도산정모델', 콘크리트학회 논문집, 제14권 6호, 2002, pp.961~972
  7. 최경규, 황영현, 박홍근, '불균등 휨모멘트를 받는 플랫플레이트-기둥 내부 접합부의 강도에 대한 해석연구', 콘크리트학회 논문집, 제14권 6호, 2002, pp.949~960
  8. Pan, Austin D. and Moehle, J. P., 'An Experimental Study of Slab-Column Connections,' ACI Structural Journal, Vol.89, No.6, Nov.-Dec. 1992, pp.626-638
  9. Farhey, D. N., Yankelevsky, D. Z, and Adin, Moshe A, 'Resistance Mechanism Model for Reinforced Concrete Flat Slab-Column Frame Connections,' ACI Structural Journal, Vo1.94, No.6, Nov.-Dec., 1997, pp.653-662
  10. Chen, W. F., 'Plasticity in reinforced concrete,' McGraw-Hill, New York, pp.204-205
  11. Vanderbilt. M. D., 'Shear Strength of Continuous Plates,' Journal of Structural Division, ASCE, Vol.98, No.ST5, May 1972, pp.961~973
  12. Morrison, D. G. and Sozen, M A, 'Response of Reinforced Concrete Plate-Column Connections to Dynamic and Static Horizontal Loads,' Civil Engineering Studies, Structural Research Series, No.490, University of IIlinois, Urbana, Apr. 1981
  13. Islam, S. and Park, R, 'Tests on Slab-Column Connections with Shear and Unbalanced Flexure,' Journal of Structural Engineering, ASCE, Vol.102, No.ST3, Mar. 1976, pp.519~568
  14. Hanson, N. M. and Hanson, J. M, 'Shear and Moment Transfer Between Concrete Slab and Column,' Journal of Portland Cement Association, Research and Development Laboratories, Vol.lO, No.1, Jan. 1968, pp.2-16
  15. Zee, H. L. and Moehle, J. P., 'Behavior of Interior and Extehor Flat Plate Connections Subjected to Inelasdc Load Reversals,' Report No. UCB/EERC- 84-07, College of Engineering, University of California at Berkeley, Aug. 1984, 130pp
  16. Hawkins, N. M, Mutchell, D., and Sheu, M. S., 'Cycle Behavior of Six Reinforced Concrete Slab-Column Specimens Transferring Moment and Shear,' Progress Report 1973-74 on NSF Project GI-38717, Department of Civil Engineering, University of Washington, Seattle, 1976
  17. Farhey, D. N., Adin, Moshe A., and Yankelevsky, D. Z., 'Flat Slab-Column Subassemblages under Lateral Loadng,' Journal of Structural Engineering, ASCE, Vol.119, No.6, June 1993, pp.1903-1916 https://doi.org/10.1061/(ASCE)0733-9445(1993)119:6(1903)
  18. Durrani, A. J. and Du, Y., 'Seismic Response of Slab-Column Connections in Existing Non-Ductite Flat-Plate building,' Technical Report NCEER-92-0010, National Center for Earthquake Engineering Research, SUNY, May 1992
  19. Robertson, I. N. and Durrani, A. J., 'Seismic Response of Connections in Indeterminate Flat-Plate Subassemblies,' Structural Research at Rice, Report No.41, Department of Civil Engineering, Rice University, Houston, July 1990, 266pp
  20. Ghali, A, Elmasri, Mahmoud, Z., and Diler, Walter, 'Punching of Flat Plates under Static and Dynamic Horizontal Force,' ACI Journal, October 1976, pp.566-572
  21. Allen, F. and Darvall P., 'Lateral Load Equivalent Frame,' ACI Structural Journal, Vo1.89, No.6, July 1977, pp.294-299