DOI QR코드

DOI QR Code

ZrO2 첨가된 SnO2를 이용한 신경 및 수포작용제 검지에 대한 연구

Sensing Properties of ZrO2-added SnO2 for Nerve and Blister Agent

  • 윤기열 (경북대학교 금속공학과) ;
  • 차건영 (경북대학교 금속공학과) ;
  • 최낙진 (경북대학교 전자전기공학부) ;
  • 이덕동 (경북대학교 전자전기공학부) ;
  • 김재창 (경북대학교 화학공학과) ;
  • 허증수 (경북대학교 금속공학과)
  • Yun, Ky-Youl (Kyungpook National University Materials Science & Metallurgy) ;
  • Cha, Gun-Young (Kyungpook National University Materials Science & Metallurgy) ;
  • Choi, Nak-Jin (Kyungpook National University Electronic and Electrical Engineering) ;
  • Lee, Duk-Dong (Kyungpook National University Electronic and Electrical Engineering) ;
  • Kim, Jae-Chang (Kyungpook National University Chemical Engineering) ;
  • Huh, Jeung-Soo (Kyungpook National University Materials Science & Metallurgy)
  • 발행 : 2004.09.30

초록

N-type semi-conducting oxides such as $SnO_{2}$, ZnO, and $ZrO_{2}$ have been known for the detecting materials of inflammable or toxic gases. Of those materials, $SnO_{2}$-based sensors are well known as high sensitive materials to detect toxic gases. And the sensitivity is improved if catalysts are added. Detecting toxic gases, especially DMMP (di-methyl-methyl-phosphonate) and DPGME (Dipropylene glycol methyl ether), was performed by a mixture of Tin oxide ($SnO_{2}$) and Zirconia ($ZrO_{2}$). The films consist of each three different mass% of Zr (from 1 mass% to 5 mass%), and they were tested by XRD, SEM, TEM, BET. Nano-structure, pore and particle size was controlled to verify the sensor's sensing mechanism. The sensors was evaluated at five different degrees (from $200^{\circ}C$ to $400^{\circ}C$) and three different concentrations (from 500 ppb to 1500 ppb). The sensors had good sensitivity of both simulants, and high selectivity of DMMP.

키워드

참고문헌

  1. Corbridge, D. E. C, 'Phosphorus, an outline of its chem. biochern. and technology', 4th edition, Elservier, 1990
  2. K. D. Schierbaum, 'Application of organic supramolecular and polymeric compounds for chemical sensors', Sensors and Actuators B, vol. 18, pp. 71-76, 1989 https://doi.org/10.1016/0250-6874(89)87026-X
  3. J. D. Choi and G. M. Choi, 'Electrical and CO gas sensing properties of layered ZnO-CuO sensor', Sensors and Actuators B, vol. 69, pp. 120-126, 2000 https://doi.org/10.1016/S0925-4005(00)00519-0
  4. J. L. Solis, S. Saukko, L. Kish, C. G. Granqvist, and V. Lantto, 'Semiconductor gas sensors based on nanostructured tungsten oxide', Thin Solid Films, vol. 391, pp. 255-260, 2001 https://doi.org/10.1016/S0040-6090(01)00991-9
  5. N. Savage, B. Chwieroth, A. Ginwalla, B. Patton, S. Akbar, and P. Dutta, 'Composite n-p semiconducting titanium oxides as gas sensors', Sensors and Actuators B, vol. 79, pp. 17-27, 2001 https://doi.org/10.1016/S0925-4005(01)00843-7
  6. H. Yamaura, T. Jinkawa, J. Tamaki, K. Moriya, N. Miura, and N. Yamazoe, 'Indium oxide-based gas sensor for selective detection of CO', Sensors and Actuators B, vol. 35-36, pp. 325-332, 1996
  7. N. Yamazoe, 'New approaches for improving semiconductor gas sensors', Sensors and Actuators B, vol. 5, pp. 7-19, 1991 https://doi.org/10.1016/0925-4005(91)80213-4
  8. 송영일, '백금계 촉매를 이용한 DMMP 제거에 관한 연구', 포항공과대학원 화학공학과 공학석사학위논문, 1993
  9. 이형직 역, '실용X선 회절 분석', Pearson Education Korea, 서울, pp. 157-165, 2000