대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제27권6호
  • /
  • Pages.685-692
  • /
  • 2003
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

초소형 연소기내 화염전파의 수치모사

Numerical Simulation of Flame Propagation in a Micro Combustor

  • 발행 : 2003.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A numerical simulation of flame propagation in a micro combustor was carried out. Combustor has a sub -millimeter depth cylindrical internal volume and axisymmetric one-dimensional was used to simplify the geometry. Semi-empirical heat transfer model was used to account for the heat loss to the walls during the flame propagation. A detailed chemical kinetics model of $H_2/Air$ with 10 species and 16 reaction steps was used to calculate the combustion. An operator-splitting PISO scheme that is non-iterative, time-dependent, and implicit was used to solve the system of transport equations. The computation was validated for adiabatic flame propagation and showed good agreement with existing results of adiabatic flame propagation. A full simulation including the heat loss model was carried out and results were compared with measurements made at corresponding test conditions. The heat loss that adds its significance at smaller value of combust or height obviously affected the flame propagation speed as final temperature of the burnt gas inside the combustor. Also, the distribution of gas properties such as temperature and species concentration showed wide variation inside the combustor, which affected the evaluation of total work available of the gases.

키워드

참고문헌

  1. Lee, D. H., Park, D. E., Yoon, J. B., Kwon, S. and Yoon, E., 2002, 'Fabrication and test of a MEMS combusor and reciprocating device,' J. Micromech. Microeng, 12, pp. 26-34 https://doi.org/10.1088/0960-1317/12/1/305
  2. Mehra A., Ayon A. A., Waitz I. A. and Schmidt M. A, 1999, 'Micro fabrication of High-Temperature Silicon Devices Using Wafer Bonding and Deep Reactive Ion Etching,' IEEE Journal of MEMS, Vol. 8, No. 2, pp. 152-160 https://doi.org/10.1109/84.767111
  3. Fu K., Knobloch A. J., Cooley B. A., Walter D. C., Fernandez-Pello C., Liepmann D. and Miyaska K., 2001, 'Microscale Combustion Research for Applications to MEMS Rotary IC Engine,'Proceedings of ASME 35th National Heat Transfer Conference, NHTC2001-20089
  4. Lee, D.H. and Choi, K. H. and Kwon, S., 'Measurement and Modeling of Combustion in a Microcombustor,' 36th Thermophysics Conference 11-14 June 2001, Anaheim, California
  5. Bradley, D. and Mitcheson, A., 1976, 'Mathematical Solutions for Explosions in Spherical Vessels,' Combustion and Flame, Vol. 26, 201-207 https://doi.org/10.1016/0010-2180(76)90072-9
  6. Takeno, T. and Iijima T., 1985, 'A Theoretical Analysis of Flame Propagation in Closed Vessels,' Transactions of the Japan Society for Aeronautical and Space Sciences, Vol. 28, No. 79
  7. Seth, B. and Aggarwal, S. K. and Sirignano, W. A., 1980, 'Flame Propagation Through and Air-Fuel Spray Mixture with Transient Droplet Vaporization,' Combustion and Flame, Vol. 39, pp. 149-168 https://doi.org/10.1016/0010-2180(80)90014-0
  8. McMurtry, P. A. and Jou, W, H. and Riley, J. J. and Metcalfe, R. W., 'Direct Numerical simulations of a Reacting Mixing Layer with Chemical Heat Release,' AlAA Journal Vol. 24, No. 9, pp. 962-970
  9. Kee, R. J. and Miller, J. A. and Jefferson, T. H., 1989, 'CHEMKIN: A General-Purpose, Problem-Independent, Transportable, Fortran Chemical Kinetics Code Package,' Sandia National Laboratories Report, SAND80-8003
  10. Kodah, Z. H. and Soliman, H. S. and Qudais, M. A. and Jahmany, Z.A., 2000, 'Combustion in spark-ignition engine,' Applied Energy, Vol. 66, pp. 237-250 https://doi.org/10.1016/S0306-2619(99)00129-4
  11. Patankar, S. V., Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Corporation
  12. Issa, R. I., 1985, 'Solution of the Implicitly Discretised Fluid Flow Equations by Operator Splitting,' Journal of Computational physics, Vol. 62, pp.40-65 https://doi.org/10.1016/0021-9991(86)90099-9
  13. Issa, R. I. and Gosman, A. D. and Watkins, A. P., 1986, 'The Computation of Compressible and Incompressible Recirculating Flows by a Non-iterative Scheme,' Journal of Computational physics, Vol. 62, 66-82 https://doi.org/10.1016/0021-9991(86)90100-2
  14. Issa, R. I. and Ahmadi-Befrui, B., Beshay K. R. and Gosman, A. D., 1991, 'Solution of the Implicitly Discretised Reacting Flow Equations by Operator-Splitting,' Journal of computational physics, Vol. 93, 388-410 https://doi.org/10.1016/0021-9991(91)90191-M