DOI QR코드

DOI QR Code

메탄-공기 예혼합기에서의 층류 화염속도 및 화염두께 예측

Prediction of Laminar Burning Velocity and Flame Thickness in Methane-Air Pre-Mixture

  • 발행 : 2003.09.01

초록

The thickness of flame and preheat zone from burning velocity which was computed by using Premix code of Chemkin program for methane-air mixture. Also the thickness was evaluated from temperature profile which is also obtained from Premix code for the equivalence ratio of 0.5 to 1.6. The computations were carried out for the laminar flame thickness and burning velocity under the unburned gas temperature 0.5bat-30bar and temperature of 300K-700K at ${\Phi}=l.0$. Comparison of the results showed no difference between these two methods. The flame thickness was decreased by increasing the pressure and temperature, but, the affect of pressure is more significant than the effect of temperature on the flame thickness. The thickness of preheat zone was about 66.5% of the flame thickness, and flame thickness and burning velocity were also predicted by using empirical equation.

키워드

참고문헌

  1. Rallis, C. J.and Garforth, A. M., 1980, 'The Determination of Laminar Burning Velocity,' Progress in Energy and Combustion Science, Vol. 6, pp. 303-329 https://doi.org/10.1016/0360-1285(80)90008-8
  2. Andrew, G. E. and Bradely, D., 1972, 'The Burning Velocity of Methane-Air Mixtures,' Combustion and Flame, Vol. 19, No. 275
  3. Gottgen, J., Mauss, F. and Peter, N., 1992, 'Analytic Approximations of Burning Velocities and Flame Thickness of Lean Hydrogen, Methane, Ethylene, Ethane, Acetylene and Propane Flames,' Twenty-fourth Symposium (international) on Combustion, The Combustion Institute, pp. 129-135
  4. Sun, C. J., Sung, C. J., He, L. and Law, C. K., 1995, 'Dynamics of Weakly Stretched Flames: Quantitative Description and Extraction of Global Flame Parameters,' Combustion and Flame, Vol. 118, No. 108
  5. Jeon, C. H. and Chang, Y. J., 1996, 'A Study on the Characteristics of Methane-Air Premixture Combustion and Combustion Radicals (I),' Transaction of the KSME(B), Vol. 20, No. 2, pp. 659-669
  6. Turns, S. R., 2000, 'An Introduction to Combustion (2nd Edition),' McGrawhill, pp. 254-288
  7. Glassman, I., 1996, 'Combustion (3rd Edition),' Academic Press. pp. 119-219
  8. Beer, J. M. and Chigier, N. A., 1974, 'Combustion Aerodynamics,' Applied Science Publishers Ltd, pp. 49-73
  9. Kwon, S. I., Arai, M. and Hiroyasu, H., 1990, 'Effects of Cylinder Temperature and Pressure on Ignition Delay in Direct Injection Diesel Engine,' Bulletin of Marine Engineering Society of Japan, Vol. 18, No. 1
  10. Bradely, D. and Mitcheson, A., 1976, 'Mathematical Solutions for Explosions in Spherical Vessels,' Combustion and Flame, Vol. 26, No. 201
  11. Metghalchi, M. and Keck, J. C., 1980, 'Laminar Burning Velocity of Propane-Air Mixture at High Temperature and Pressure,' Combustion and Flame, Vol. 38, No. 143
  12. Gu, X. J., Haq, M. Z., Lawes, M. and Woolley, R., 2000, 'Laminar Burning Velocity and Markstein Lengths of Methane-Air Mixtures,' Combustion and Flame, Vol. 124, No. 41
  13. Iijima, T. and Takeno, T., 1986, 'Effects of Temperature and Pressure on Burning Velocity,' Combustion and Flame, Vol. 65, No. 35
  14. Egolfopoulos, F. N., Cho, P. and Law, C. K., 1989, 'Laminar Flame Speeds of Methane-Air Mixtures under Reduced and Elevated Pressures,' Combustion and Flame, Vol. 76, No. 375