Effect of LiOT on the Tritium Inventory of $Li_{2}O$ Fusion Blanket Breeder Material

  • Cho S. (Korea Basic Science Institute) ;
  • Abdou M.A. (University of California)
  • Published : 2003.12.01

Abstract

Tritium behavior in the solid breeder blanket is one of the key factors in determining tritium self-sufficiency, as well as safety, of fusion reactors. Recently, a model has been developed to describe the tritium behavior in solid breeder material, which can predict the tritium release and inventory in the blanket. However, the model has limitation to account for tritium solubility effects, mainly existing as LiOT, especially inside the $Li_{2}O$ solid breeder. In order to improve the capability of predicting the LiOT precipitation in $Li_{2}O$ solid breeder, a new logic is developed and integrated in the existing tritium release and inventory calculation code. With the logic developed in this work, the code can have capabilities to analyze tritium release and inventories in $Li_{2}O$ under steady and transient conditions. It can be found that tritium inventory as LiOT is an important mechanism under pulsed operation, and the amount of inventory becomes higher as the tritium generation rate increases and the temperature decreases. Also, the temperature limits for the generation of LiOT precipitation are determined. Therefore the developed logic helps understand the tritium transport mechanism in $Li_{2}O$ solid breeder.

Keywords

References

  1. K. Ioki et al., 'Design and Material Selection for ITER First Wall/Blanket, Divertor and Vacuum Vessel,' J. of Nuclear Materials, Vol. 258-263, pp. 74-84 (1998) https://doi.org/10.1016/S0022-3115(98)00356-0
  2. C.E. Johnson, 'Research and Development Status of Ceramic Breeder Materials,' J. of Nuclear Materials, Vol. 179-181, pp. 42-56 (1991) https://doi.org/10.1016/0022-3115(91)90012-V
  3. N. Roux, C. Johnson and K. Noda, 'Properties and Performance of Tritium Breeding Ceramics,' J. of Nuclear Materials, Vol. 191-194, pp. 15-22 (1992) https://doi.org/10.1016/0022-3115(92)90725-Z
  4. N. Roux et al., 'Summary of Experimental Results for Ceramic Breeder Materials,' Fusion Engineering and Design, Vol. 27, pp. 154-166 (1995) https://doi.org/10.1016/0920-3796(95)90123-X
  5. H. Moriyama, S. Tanaka and K. Noda, 'Irradiation Effects in Ceramic Breeder Materials,' J. of Nuclear Materials, Vol. 258-263, pp. 587-594 (1998) https://doi.org/10.1016/S0022-3115(98)00108-1
  6. G. Federici, A.R. Raffray and M.A. Abdou, 'MISTRAL: A Comprehensive Model for Tritium Transport in Lithium Base CeramicsPart I and II,' J. of Nuclear Materials, Vol. 173, pp. 184-228 (1990) https://doi.org/10.1016/0022-3115(90)90258-O
  7. A. Badawi, Modeling and Analysis of Time-Dependent Tritium Transport in Lithium-Containing Ceramics, Ph.D. Dissertation, University of California, Los Angeles, (1993)
  8. M. Tetenbaum, A.K. Fisher and C.E. Johnson, 'An Investigation of the Solubility of LiOH in Solid $Li_2O$,' Fusion Technology, Vol. 7, pp. 53-56 (1985) https://doi.org/10.13182/FST85-A24517
  9. M. Tetenbaum, and C.E. Johnson, 'Partial Pressures of LiOH(s,l) above the Diphasic $Li_2O-LiOH(s,l)$ System,' J. of Nuclear Materials, Vol. 126, pp. 25-29 (1984) https://doi.org/10.1016/0022-3115(84)90528-2
  10. H. Takeshita and H. Watanabe, 'Equilibrium Pressures of $H_2O(g)$ over the $Li_2O(s)-LiOH(s)$ System,' J. of Nuclear Materials, Vol. 207, pp. 92-97 (1993) https://doi.org/10.1016/0022-3115(93)90250-3
  11. N.W. Gregory and R.H. Mohr, 'The Equilibrium $2LiOH(s) + H_2O(g)$,' J. Am. Chem. Soc., Vol. 77, pp. 2142 (1955) https://doi.org/10.1021/ja01613a030
  12. A.K. Fisher and C.E. Johnson, 'Thermodynamics of $Li_2O$ Fusion Reactor Breeder,' J. of Nuclear Materials, Vol. 126, pp. 268-275 (1984) https://doi.org/10.1016/0022-3115(84)90038-2
  13. A. Badawi, A.R. Raffray, A. Ying and M.A. Abdou, 'Tritium Analysis for the US-ITER Solid Breeder Blanket,' Fusion Technology, Vol. 19, pp. 1532-1537 (1991) https://doi.org/10.13182/FST91-A29559
  14. H. Kudo, 'The Rate of Thermal Decomposition of LiOH(s), LiOD(s) and LiOT(s),' J. of Nuclear Materials, Vol. 87, pp. 185-188 (1979) https://doi.org/10.1016/0022-3115(79)90137-5