초록
본 연구에서는 정지궤도 통신위성의 보안을 위해 CCSDS 원격명령(Telecommand) 암호복호기를 구현하였다. CCSDS 원격명령 데이터링크(Datalink)의 보안 기밀성(Confidentiality)을 위해 데이터링크 계층(Layer)내의 트랜스퍼 부계층(Transfer Sublayer) 다음에서 암호화를 행하는 Option-A를 선정하고 64-비트 코드블록(Codeblock)에서 56-비트 데이터 비트의 암호화를 위해 DES CFB 모드를 사용하였다. A54X32 FPGA에 구현된 DES CFB 로직은 원격명령 암호복호기의 기능 검증을 위한 인터페이스 및 제어 로직과 함께 PCB 보드에 구현하였다. 기능시험용 PC를 사용하여 암호화된 원격명령을 생성하고 암호복호기에 전송한 뒤 복호화한 뒤 기능시험용 PC에 피드백하고 전송한 코드블록과 비교한다. 수행코드에 해당하는 릴레이 구동에 의한 LED ON 동작 및 측정된 코드블록 파형과 시뮬레이션 파형의 비교를 통해 원격명령 암호복호기의 기능을 검증하였다.
In this paper, a CCSDS(Consultative Committee for Space Data Systems) telecommand(TC) decryptor for the security of geostationary communications satellite was implemented. For the confidentiality of CCSDS TC datalink security, Option-A which implements the security services below the transfer sublayer was selected. Also CFB(Cipher Feedback) operation mode of DES(Data Encryption Standard) was used for the encryption of 56-bit data bits in 64-bit codeblock. To verify Decryptor function, the DES CFB logic implemented on A54SX32 FPGA(Field Programmable Gate Array) was integrated with interface and control logics in a PCB(Printed Circuit Board). Using a function test PC, the encrypted codeblocks were generated, transferred into the decryptor, decrypted, and the decrypted codeblocks were transmitted to the function test PC, and then compared with the source codeblocks. Through LED(Light Emitting Diode) ON operation by driving the relay related to Op-code decoded and the comparison between the codeblock output waveforms measured and those simulated, the telecommand decryptor function was verified.