Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Analysis of rigid and semi-rigid steel-concrete composite joints under monotonic loading - Part II: Parametric study and comparison with the Eurocode 4 proposal

  • Amadio, C. (Department of Civil Engineering, University of Trieste) ;
  • Fragiacomo, M. (Department of Civil Engineering, University of Trieste)
  • Published : 2003.10.25
⟨ Previous Next ⟩

Abstract

This paper analyses the response of rigid and semi-rigid steel-concrete composite joints under monotonic loading. The influence of some important parameters, such as the presence of column web stiffening and the mechanical properties of component materials, is investigated by using a three-dimensional finite element modelling based on the Abaqus code. Numerical and experimental responses of different types of composite joints are also compared with the analytical results obtained using the component approach proposed by Eurocode 4. The results obtained with this approach generally fit well with the numerical and experimental values in terms of strength. Conversely, some significant limits arise when evaluating initial stiffness and non-linear behaviour of the composite joint.

Keywords

References

  1. Amadio, C., Benussi, F. and Noe, S. (1993), "Modellazione di giunti semirigidi per la progettazione di telai composti", Proc. of the 1st Italian Workshop on Composite Structures, Trento, Italy, June, 195-212 (in Italian).
  2. Amadio, C. and Piva, M. (1995), "Valutazione della risposta di giunti composti rigidi o semi-rigidi mediante modellazione agli elementi finiti", Proc. of the 15th C.T.A. Conf., Riva del Garda, Italy, October, 44-55 (in Italian).
  3. Amadio, C., Fragiacomo, M., Grandelis, F. and Macorini, L. (2001), "Sulla modellazione del giunto semi-rigido composto acciaio-calcestruzzo", Proc. of the 18th C.T.A. Conf., Venice, Italy, September, 341-354 (in Italian).
  4. Anderson, D. and Najafi, A.A. (1994), "Performance of composite connections: major axis end plate joints", J. of Constructional Steel Research, 31(1), 31-57. https://doi.org/10.1016/0143-974X(94)90022-1
  5. Aribert, J.M. (1995), "Influence of slip of the shear connection on composite joint behaviour", Proc. of the 3rd Int. Workshop on Connections in Steel Structures, Trento, Italy, May.
  6. Benussi, F., Puhali, R. and Zandonini, R. (1989), "Semi-rigid joints in steel-concrete composite frames", Costruzioni Metalliche, 5, 1-28.
  7. Benussi, F., Bernuzzi, C., Noe, S. and Zandonini, R. (1991), "Giunti semirigidi in telai composti soggetti ad azioni cicliche", Proc. of the 13th C.T.A. Conf., Abano Terme, Italy, October, 65-83 (in Italian).
  8. Benussi, F., Noe, S. and Rassati, G.A. (1997), "Modellazione per componenti dei giunti semirigidi in telai composti soggetti a carichi monotoni e ciclici", Proc. of the 16th C.T.A. Conf., Ancona, Italy, October, 47-61 (in Italian).
  9. Bursi, O.S. and Ballerini, M. (1997), "Low-cycle behaviour and analysis of steel-concrete composite substructures", Proc. of the Int. Conf. on Composite Construction - Conventional and Innovative, Innsbruck, Austria, September, 615-620.
  10. Bursi, O.S. and Gramola, G. (1997), "Smeared crack analyses of steel-concrete composite substructures", Proc. of the Stessa 97 Conf., Kyoto.
  11. CEN, European Committee for Standardisation (1992), Eurocode 3. Common Unified Rules for Steel Structure. ENV 1993-1-1.
  12. CEN, European Committee for Standardisation (1992), Eurocode 4. Common Unified Rules for Composite Steel and Concrete Structures. ENV 1994-1-1.
  13. CEN, European Committee for Standardisation (1996), Eurocode 4. Proposed Annex J for ENV 1994-1-1. Composite joint in building frame, Draft for meeting of CEN/TC250/SC4, March.
  14. Dissanayake, U.I., Burgess, I.W. and Davison, J.B. (2000), "Modelling of plane composite frames in unpropped construction", Eng. Struct., 22(4), 287-303. https://doi.org/10.1016/S0141-0296(98)00077-7
  15. Faella, C., Piluso, V. and Rizzano, G. (2000), Structural Steel Semirigid Connections, CRC PRESS, Bola Raton, Florida, U.S.A.
  16. Hibbit, Karlsson & Sorensen Inc. (1997), Abaqus, Version 5.7, U.S.A.
  17. Huber, G. and Tschemmernegg, F. (1998), "Modelling of beam-to-column joints", J. of Constructional Steel Research, 45(2), 199-216. https://doi.org/10.1016/S0143-974X(97)00072-2
  18. Kattner, M. and Crisinel, M. (2000), "Finite element modelling of semi-rigid composite joints", Comput. Struct., 78, 341-353. https://doi.org/10.1016/S0045-7949(00)00064-X
  19. Leon, R. and Zandonini, R. (1992), Composite Connection. Constructional steel design. An International Guide. Edited by Patrick J. Dowling, John E. Harding, Reidar Bjorhovde. Elsevier Applied Science.
  20. Li, T.Q., Nethercot, D.A. and Choo, B.S. (1996), "Behaviour of flush end-plate composite connections with unbalanced moment and variable shear/moment ratios-II. Prediction of moment capacity", J. of Constructional Steel Research, 38(2), 165-198. https://doi.org/10.1016/0143-974X(96)00016-8
  21. Mazzolani, F.M. and Piluso, V. (1996), Theory and Design of Seismic Resistant Steel Frames, E & FN Spon, An Imprint of Chapman & Hall, London, U.K.
  22. Nethercot, D. (1998), "Behaviour and design of composite connection", Proc. of the Int. Conf. COST C1 "Control of the semi-rigid behaviour of civil engineering structural connections", Liege, September.
  23. Nethercot, D.A. and Zandonini, R. (1989), Methods of Prediction of Joint Behaviour: Beam-to-column Connections. Stability and Strength. Edited by R. Narayanan. Elsevier applied science, 23-62.
  24. Puhali, R., Smotlak, I. and Zandonini, R. (1990), "Semi-rigid composite action: experimental analysis and a suitable model", J. of Constructional Steel Research, 15, 121-151. https://doi.org/10.1016/0143-974X(90)90045-I
  25. Ren, P., Crisinel, M. and Carretero, A. (1996), "Effets de la dalle en beton arme sur le comportement momentrotation d'assemblages metalliques pouter-poteau. Etude experimentale, analyse numerique et methode simplifiee", Construction Metallique, 3, 3-24 (in French).
  26. Tschemmernegg, F. and Queiroz, G. (1995), "Mechanical modelling of semi-rigid joints for the analysis of framed steel and composite structures", Proc. of the 3rd Int. Workshop on Connections in Steel Structures, Trento, Italy, May.
  27. Tschemmernegg, F. (1998), "Connection of floor systems to columns - conventional and advanced", Proc. of the Int. Conf. COST C1 "Control of the semi-rigid behaviour of civil engineering structural connections", Liege, September.
  28. Tchemmernegg, F., Rubin, D. and Pavlov, A. (1998), "Application of the component method to composite joints", Proc. of the Int. Conf. COST C1 "Control of the semi-rigid behaviour of civil engineering structural connections", Liege, September.
  29. Wong, Y.L., Chan, S.L. and Nethercot, D.A. (1996), "A simplified design method for non-sway composite frames with semi-rigid connections", The Structural Engineer, 74(2), 23-28.
  30. Xiao, Y., Choo, B.S. and Nethercot, D.A. (1996), "Composite connections in steel and concrete. Part 2 - Moment capacity of end plate beam to column connections", J. of Constructional Steel Research, 37(1), 63-90. https://doi.org/10.1016/0143-974X(95)00015-N
  31. Zandonini, R. (1989), Semi-rigid Composite Joints. Edited by R. Narayanan. Elsevier applied science, 63-120.

Cited by

  1. An alternative design for internal and external semi-rigid composite joints. Part II: Finite element modelling and analytical study vol.30, pp.1, 2008, https://doi.org/10.1016/j.engstruct.2007.03.010
  2. Practical and efficient approaches for semi-rigid design of composite frames vol.7, pp.2, 2007, https://doi.org/10.12989/scs.2007.7.2.161