DOI QR코드

DOI QR Code

Sway buckling of down-aisle, spliced, unbraced pallet rack structures

  • Beale, R.G. (Slender Structures Research Group, OCSLD Technology Oxford Brookes University) ;
  • Godley, M.H.R. (Slender Structures Research Group, OCSLD Technology Oxford Brookes University)
  • Received : 2003.03.04
  • Accepted : 2003.07.29
  • Published : 2003.10.25

Abstract

This paper presents an efficient approach to the determination of the buckling loads of down-aisle, spliced, unbraced, pallet rack structures subjected to vertical and horizontal loads. A pallet rack structures is analysed by considering the stability equations of an equivalent free-sway column. The effects of semi-rigid beam-to-upright, splice-to-upright and base-plate-to-upright connections are fully incorporated into the analysis. Each section of upright between successive beam levels in the pallet rack is considered to be a single column element with two rotational degrees of freedom. A computer algebra package was used to determine modified stability equations for column elements containing splices. The influence of the position of splices in a pallet rack is clearly demonstrated.

Keywords

References

  1. Beale, R.G. and Godley, M.H.R. (2001), "Problems arising with pallet rack semi-rigid base-plates", Proc. 1st Int. Conf. On Steel & Composite Structures, Pusan, 699-706.
  2. Beale R.G. and Godley M.H.R. (2002), "The design of the pallet program", Proc. 16th Int. Speciality Conf. on Cold-Formed Steel Structures, Orlando, 353-368.
  3. Davies, J.M. (1980), "Stabilities of unbraced pallet racks", Proc. 5th Int. Speciality Conf. on Cold-Formed Steel Structures, St. Louis, 409-428.
  4. Davies, J.M. (1992), "Down-aisle stability of rack structures", Proc. of 11th Int. Speciality Conf. on Cold-Formed Steel Structures, St. Louis, 417-435.
  5. FEA Ltd., (2000), "Lusas User Guide Version 13".
  6. Federation Europeenne de la Manutention, Section X, (2000), Recommendations for the Design of Steel Static Pallet Racking and Shelving.
  7. Feng, X., Godley, M.H.R. and Beale, R.G. (1993), "Elastic buckling analysis of pallet rack structures", Developments in Structural Computing, Edinburgh, 207-305.
  8. Godley, M.H.R., Beale, R.G. and Feng, X. (1998), "Rotational stiffnesses of semi-rigid base-plates", Proc. 14th Int. Speciality Conf. on Cold-Formed Steel Structures, St. Louis, 323-334.
  9. Godley, M.H.R., Beale, R.G. and Feng, X. (2000), "Analysis and design of down-aisle pallet rack structures", Comp. Struct., 77(4), 391-401. https://doi.org/10.1016/S0045-7949(00)00031-6
  10. Horne, M.R. and Merchant, W. (1965), The Stability of Frames, Pergamon.
  11. Lewis, G.M. (1991), "Stability of rack structures", Thin-Walled Struct., 27, 163-174.
  12. Markazi, F., Godley, M.H.R. and Beale, R.G. (1997), "Experimental analysis of semi-rigid boltless connections", Thin-Walled Struct. 27, 53-87.
  13. Mathsoft Inc, (2001), "Mathcad User's Guide with Reference Manual".
  14. McConnel. R.E. and Kelly, S.J. (1983), "Structural aspects of the progressive collapse of warehouse racking", The Struct. Eng. 48(11), 343-347.
  15. Williams, F.W. and Wittrick, W.H. (1983), "Exact buckling and frequency calculations surveyed", J. Struct. Eng., 109(1), 169-187. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:1(169)
  16. Yu, W-W. (1973), Cold-Formed Structures, McGraw-Hill.