DOI QR코드

DOI QR Code

A high precision shear deformable element for free vibration of thick/thin composite trapezoidal plates

  • Haldar, S. (Department of Applied Mechanics, B. E. College (D. U.)) ;
  • Manna, M.C. (Department of Applied Mechanics, B. E. College (D. U.))
  • 투고 : 2002.12.16
  • 심사 : 2003.06.05
  • 발행 : 2003.06.25

초록

A high precision shear deformable triangular element has been proposed for free vibration analysis of composite trapezoidal plates. The element has twelve nodes at the three sides and four nodes inside the element. Initially the element has fifty-five degrees of freedom, which has been reduced to forty-eight by eliminating the degrees of freedom of the internal nodes through static condensation. Plates having different side ratios (b/a), boundary conditions, thickness ratios (h/a=0.01, 0.1 and 0.2), number of layers and fibre angle orientations have been analyzed by the proposed shear locking free element. Trapezoidal laminate with concentrated mass at the centre has also been analyzed. An efficient mass lumping scheme has been recommended, where the effect of rotary inertia has been included. For validation of the present element and formulation few results of isotropic trapezoidal plate and square composite laminate have been compared with those obtained from open literatures. The numerical results for composite trapezoidal laminate have been given as new results.

키워드

참고문헌

  1. Batoz, J. L. and Katili, I. (1992), "On a simple triangular Reissner/Mindlin plate element based on incompatible modes and discrete constraints", Int. J. Num. Meth. Eng., 35, 1603-1632. https://doi.org/10.1002/nme.1620350805
  2. Boay, C. G. (1995), "Frequency analysis of rectangular isotropic plates carrying a concentrated mass", Compt. Struct. 56(1), 39-48.
  3. Corr, R. B. and Jennings. A. (1976), "A simultaneous iteration algorithm for symmetric eigenvalue problems", Int. J. Num. Meth. Eng., 10, 647-663. https://doi.org/10.1002/nme.1620100313
  4. Dey, P. Private communication.
  5. Gallaghar, R. H. (1975), Finite Element Analysis, Fundamentals, Prentice-Hall, Englewood Cliffs, NJ.
  6. Hinton, E., Rock, T. and Zienkiewicz, O. C. (1976), "A note on mass lumping and related processes in the finite element method", Earthquake Eng. and Struct. Dynamics, 4, 245-249. https://doi.org/10.1002/eqe.4290040305
  7. Liew, K. M. (1992), "Response of plates of arbitrary shape subjected to static loading", J. Eng. Mech. ASCE, 118(9), 1783-1794. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:9(1783)
  8. Liew, K. M. and Lam, K. Y. (1991), "A Rayleigh-Ritz approach to transverse vibration of isotropic and anisotropic trapezoidal plates using orthogonal plate functions", Int. J. Solids Struct. 27(2), 189-203. https://doi.org/10.1016/0020-7683(91)90228-8
  9. Liew, K. M. and Lim, C. W. (1995), "Vibratory characteristics of general laminates, I: symmetric trapezoids", J. Sound. Vibr. 183, 615-642. https://doi.org/10.1006/jsvi.1995.0276
  10. Lim, C. W., Liew, K. M. and Kitipornchai, S. (1996), "Vibration of arbitrarily laminated plates of general trapezoidal planform", J. Acous. Soc. Am. 100, 3674-3685. https://doi.org/10.1121/1.417230
  11. Liew, K. M., Karunasena, W., Kitipornchai, S. and Chen, C. C. (1999), "Vibration of unsymmetrically laminated thick quadrilateral plates", J. Acous. Soc. Am. 105, 1672-1681. https://doi.org/10.1121/1.426706
  12. Petrolito, J. (1989), "A modified ACM element for thick plate analysis", Compt. Struct., 32, 1303-1309. https://doi.org/10.1016/0045-7949(89)90307-6
  13. Reddy, J. N. (1989), "On refined computational modes of composite laminates", Int. J. Num. Meth. Eng., 27, 361-382. https://doi.org/10.1002/nme.1620270210
  14. Reddy, J. N. and Khdeir, A. A. (1989), "Buckling and vibration of laminated composite plates using various plate theory", AIAAJ, 27, 1808-1817. https://doi.org/10.2514/3.10338
  15. Sengupta, D. (1991), "Stress analysis of flat plates with shear using explicit stiffness matrix", Int. J. Num. Meth. Eng., 32, 1389-1409. https://doi.org/10.1002/nme.1620320703
  16. Timoshenko, S. P. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw-Hill, New York.
  17. Wanji, C. and Cheung, Y. K. (2000), "Refined quadrilateral element based on Mindlin/Reissner plate theory", Int. J. Num. Meth. Eng., 47, 605-627. https://doi.org/10.1002/(SICI)1097-0207(20000110/30)47:1/3<605::AID-NME785>3.0.CO;2-E
  18. Yuan, F. G. and Miller, R. E. (1989), "A cubic triangular finite element for flat plates with shear", Int. J. Num. Meth. Eng., 28, 109-126. https://doi.org/10.1002/nme.1620280109
  19. Zhongnian Xu. (1992), "A thick-thin triangular plate element", Int. J. Num. Meth. Eng., 33, 963-973. https://doi.org/10.1002/nme.1620330506
  20. Zienkiewicz, O. C. (1971), The Finite Element Method in Engineering Science, McGraw-Hill, New York.
  21. Zienkiewicz, O. C. and Taylor, R. L. (1988), The Finite Element Method (two volumes), McGraw-Hill, New York.

피인용 문헌

  1. Free vibration analysis of moderately thick trapezoidal symmetrically laminated plates with various combinations of boundary conditions vol.36, 2012, https://doi.org/10.1016/j.euromechsol.2012.03.004
  2. Analysis of shear deformable laminated composite trapezoidal plates vol.30, pp.8, 2009, https://doi.org/10.1016/j.matdes.2008.12.016
  3. Flutter analysis of hybrid metal-composite low aspect ratio trapezoidal wings in supersonic flow vol.30, pp.1, 2017, https://doi.org/10.1016/j.cja.2016.12.016
  4. A general Ritz formulation for the free vibration analysis of thick trapezoidal and triangular laminated plates resting on elastic supports vol.69, 2013, https://doi.org/10.1016/j.ijmecsci.2012.12.016
  5. Vibration behavior of trapezoidal sandwich plate with functionally graded-porous core and graphene platelet-reinforced layers vol.36, pp.1, 2003, https://doi.org/10.12989/scs.2020.36.1.047