DOI QR코드

DOI QR Code

Flexural behavior and resistance of uni-planar KK and X tubular joints

  • Chen, Yiyi (Department of Building Engineering, Tongji University) ;
  • Wang, Wei (Department of Building Engineering, Tongji University)
  • 투고 : 2002.04.15
  • 심사 : 2003.03.25
  • 발행 : 2003.04.25

초록

The importance of the research on moment-resistant properties of unstiffened tubular joints and the research background are introduced. The performed experimental research on the bending rigidity and capacity of the joints is reported. The emphasis is put on the discussion of the flexural behavior of the joints including sets of geometrical parameters of the joints and several loading combinations. Procedures and results of loading tests on four full size joints in planar KK and X configuration are described in details at first. Mechanical models are proposed to analyze the joint specimens. Three-dimensional nonlinear FE models are established and verified with the experimental results. By comparing the experimental data with the results of the analysis, it is reported reasonable to carry out the structural analysis under the assumption that the joint is fully rigidly connected, and their bending capacities can assure the strength of the members connected under certain limitation. Furthermore, a parametric formula for inplane bengding rigidity of T and Y type tubular joints is proposed on the basis of FE calculation and regression analysis. Compared with test results, it is shown that the parametric formula developed in this paper has good applicability.

키워드

참고문헌

  1. ANSYS(1998), ANSYS Users Manual Revision 5.5, ANSYS, lnc., Canonsburg, Pennsylvania.
  2. Bouwkamp, J.G. et al.(1980), "Effect of joint flexibility on the response of offshore structures", ln Proc Offshore Technol Conf. Houston, TX.
  3. Chen, W.F., Atsuta, T.(1976), Theory of Beam-Columns, Vol. 1: ln-Plane Behavior and Design, McGraw-Hill, New York.
  4. Dexter, E.M., Lee, M.M.K., Kirkwood, M.G.(1996), "Overlapped K joints in circular hollow sections underaxial loading", Journal of Offshore Mechanics and Arctic Engineering, 118(2), 53-61. https://doi.org/10.1115/1.2828801
  5. Fessler, H., Spooner, H.(1981), "Experimental determination of stiffness of tubular joints", Proc. 2nd lnt. Symp. on lntegrity of Offshore Structures, Glasgow.
  6. Gibstein, M.B. (1987), "Stress concentration in tubular K-joints with diameter ratio equal to one", Steel in Marine Structures, Elsevier Science Publishers B. V. Amsterdam.
  7. Holmas, T. (1987), "lmplementation of tubular joint flexibility in global frame analysis", Report No. 87-1 Division of structural mechanics, The Norwegian lnstitute of Technology.
  8. Kurobane, Y., Makino, Y. and Ochi,K.(1984),"Ultimate resistance of unstiffened tubular joints", J. Struct. Eng., ASCE 110, 385-400. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:2(385)
  9. Moffat, D.G., Mwenifumbo, J.A.M., Xu, S.H., et al.(1991), "Effective stress factors for piping branch junctions due to internal pressure and external moment loads", Journal of Strain Analysis, 26, 85-101. https://doi.org/10.1243/03093247V262085
  10. Ogawa, K., Makino, Y., Yamanari, M. and Kurobane, Y.(1987), "Effective length for web members in tubulartruss", Journal of Struct. Const. Engrg., Transaction of AlJ, No. 388
  11. Packer, J.A. and Henderson, J.E.(1992), Design Guide for Hollow Structural Section Connections, Canadionlnstitute of Steel Construction, 38-47.
  12. Rodabaugh, E.C.(1980), "Review of data relevant to the design of tubular joints for use in fixed offshoreplatforms", W .R. C.
  13. Rondal, J.(1990), "Effective lengths of tubular lattice girder members", ClDECT Report, 3K-90/3.
  14. Soh, A.K., Soh, C.K.(1993), "Hot Spot stress of K tubular joints subjected to combined loadings", J. Const.Steel Research, 26, 125-140. https://doi.org/10.1016/0143-974X(93)90032-N
  15. Szlendak,J., Brodka, J.(1985), "Strengthening of T moment of RHS joints", Proc. lnstn Civ. Engrs, Part 2, 79, 717-727. https://doi.org/10.1680/iicep.1985.767
  16. Ure, A., Grundy, P., et al.(1993), "Flexibility coefficients of tubular connections",Tubular Structures, London.
  17. Wang, W., Chen, Y.Y., Chen, Y.J., Zhao, X.Z. and Liu, P.(2001), "Experimental research on flexible rigidity of uni-planar KK tubular joints", Proceedings of 6th Pacilic Structural Steel Conlerence, Beijing, October.
  18. Wardenier,J., Kurobane, Y., Packer, J.A., Dutta, D. and Yeomans, N.(1991), Design Guide for Circular Hollow Section (CHS) Joints under Predominantly Static Loading, Verlag TUV Rheinland, Koln.
  19. Yura, J.A., Zettlemoyer, N., Edwards, l.F.(1981), "Ultimate capacity of circular tubular joints", J. Struct. Eng., ASCE 107, 1965-1983.

피인용 문헌

  1. An automatic three-dimensional loading apparatus for static tests of truss joints vol.48, 2014, https://doi.org/10.1016/j.autcon.2014.08.005
  2. Tubular structures in China: state of the art and applications vol.163, pp.6, 2010, https://doi.org/10.1680/stbu.2010.163.6.417
  3. Reserve capacity of fatigue damaged internally ring stiffened tubular joints vol.4, pp.2, 2004, https://doi.org/10.12989/scs.2004.4.2.149
  4. Modelling and classification of tubular joint rigidity and its effect on the global response of CHS lattice girders vol.21, pp.6, 2005, https://doi.org/10.12989/sem.2005.21.6.677
  5. Axial tensile behavior and strength of welds for CHS branches to SHS chord joints vol.115, 2015, https://doi.org/10.1016/j.jcsr.2015.08.044
  6. Experiment of the SCT Joint under Complicated Loading vol.255-260, pp.1662-8985, 2011, https://doi.org/10.4028/www.scientific.net/AMR.255-260.607
  7. Effect of Geometric Parameters (β and τ) on Behaviour of Cold Formed Stainless Steel Tubular X-Joints vol.18, pp.3, 2018, https://doi.org/10.1007/s13296-018-0031-0
  8. Experimental studies on behaviour of tubular T-joints reinforced with grouted sleeve vol.23, pp.5, 2017, https://doi.org/10.12989/scs.2017.23.5.585