DOI QR코드

DOI QR Code

Identification of dynamic characteristics of structures using vector backward auto-regressive model

  • Hung, Chen-Far (Department of Engineering Science and Ocean Engineering, National Taiwan University) ;
  • Ko, Wen-Jiunn (Department of Engineering Science and Ocean Engineering, National Taiwan University) ;
  • Peng, Yen-Tun (Department of Engineering Science and Ocean Engineering, National Taiwan University)
  • 투고 : 2002.04.30
  • 심사 : 2003.02.24
  • 발행 : 2003.03.25

초록

This investigation presents an efficient method for identifying modal characteristics from the measured displacement, velocity and acceleration signals of multiple channels on structural systems. A Vector Backward Auto-Regressive model (VBAR) that describes the relationship between the output information in different time steps is used to establish a backward state equation. Generally, the accuracy of the identified dynamic characteristics can be improved by increasing the order of the Auto-Regressive model (AR) in cases of measurement of data under noisy circumstances. However, a higher-order AR model also induces more numerical modes, only some of which are the system modes. The proposed VBAR model provides a clear characteristic boundary to separate the system modes from the spurious modes. A numerical example of a lumped-mass model with three DOFs was established to verify the applicability and effectiveness of the proposed method. Finally, an offshore platform model was experimentally employed as an application case to confirm the proposed VBAR method can be applied to real-world structures.

키워드

참고문헌

  1. Allemang, R.L. and Brown, D.L. (1983), "A correlation coefficient for modal vector analysis", Proc. 1st Int. Modal Analysis Conf., Bethel, Connecticut, U.S.A., 110-116.
  2. Bernitsas, M.M. and Suryatama, D. (1999), "Structural redesign by large admissible perturbations with static mode compensation", Journal of Offshore Mechanics and Arctic Engineering, 121, 39-46. https://doi.org/10.1115/1.2829553
  3. Cooley, J.W. and Turkey, J.W. (1965), "An algorithm for the machine calculation of complex Fourier series", Mathematics of Computation, 19, 297-301. https://doi.org/10.1090/S0025-5718-1965-0178586-1
  4. Cooper, J.E. (1992), "The use of backwards model for structural parameters identification", Mechanical System and Signal Processing, 6(3), 217-228. https://doi.org/10.1016/0888-3270(92)90025-E
  5. Ewins, D.J. (1984), Modal Testing Theory and Practice, Research Studies Press Ltd, London.
  6. Gohberg, I., Lancaster, P. and Rodman, L. (1982), Matrix Polynomials, Academic Press, New York.
  7. Hollkamp, J.J. and Batill, S.M. (1991), "Automated parameter identification and order reduction for discrete time series models", AIAA J., 29(1), 96-103. https://doi.org/10.2514/3.10550
  8. Ibrahim, S.R. and Mikulcik, E.C. (1973), "A time domain vibration test", Shock and Vibration Bulletin, 43, part 4.
  9. Juang, J.N. and Pappa, R.S. (1985), "An eigensystem realization algorithm for modal parameter identification and model reduction", Journal of Guidance, Control, and Dynamics, 8, 620-627. https://doi.org/10.2514/3.20031
  10. Hung, C.F., Ko, W.J. and Tai, C.H. (1998), "Identification of modal parameters by the state equation of vector auto-regressive model", (in Chinese), Journal of the Society of Naval Architects and Marine Engineers, ROC, 17(3), 35-44.
  11. Hung, C.F., Ko, W.J. and Tai, C.H. (2002), "Identification of dynamic systems from data composed by combination of their response components", Engineering Structures, 24, 1441-1450. https://doi.org/10.1016/S0141-0296(02)00092-5
  12. Hung, C.F. and Ko, W.J. (2002), "Identification of modal parameters from measured output data using vector backward autoregressive model", J. Sound and Vib., 256(2), 249-270. https://doi.org/10.1006/jsvi.2001.4205
  13. Kay, S.M. (1988), Modern Spectral Estimation - Theory & Application, Prentice Hall, New Jersey.
  14. Kumaresan, R. and Tufts, D.W. (1982), "Estimating the parameters of exponentially damped sinusoids and pole-zero modeling in noise", IEEE Transactions on Acoustics, Speech, and Signal Processing, 30(6), 833- 840. https://doi.org/10.1109/TASSP.1982.1163974
  15. Li, C.S. and Ko, W.J. (1987), "On the application of the time series in structural failure detection and monitoring for offshore applications", The Royal Institution of Naval Architects, 130, 315-327.
  16. Li, C.S., Ko, W.J., Li, C.S. and Shyu, R.J. (1993), "Vector autoregressive modal analysis with application to ship structures", J. Sound and Vib., 167(1), 1-15. https://doi.org/10.1006/jsvi.1993.1318
  17. Viero, P.F. and Roitman, N. (1999), "Application of some damage identification methods in offshore platforms", Marine Structures, 12, 107-126. https://doi.org/10.1016/S0951-8339(99)00007-6