유전자 검색을 위한 DNA 칩 제작용 microarrayer의 개발

Development of microarrayer for manufacturing DNA chip used in genome project

  • 이현동 (충남대학교 농업생명과학대학 농업공학부) ;
  • 김기대 (두원공과대학 자동화시스템과) ;
  • 김찬수 (충남대학교 농업생명과학대학 농업공학부) ;
  • 임용표 (충남대학교 농업생명과학대학 농업공학부) ;
  • 박정규 (충남대학교 농업생명과학대학 농업공학부)
  • Lee, Hyun-Dong (Division of Agricultural Engineering, Chungnam Nat'l Univ.) ;
  • Kim, Ki-Dae (Dept. of Automation System, Doowon Technical College) ;
  • Kim, Chan-Soo (Division of Agricultural Engineering, Chungnam Nat'l Univ.) ;
  • Lim, Yong-Pyo (Division of Agricultural Engineering, Chungnam Nat'l Univ.) ;
  • Park, Jung-Kyu (Division of Agricultural Engineering, Chungnam Nat'l Univ.)
  • 발행 : 2003.06.30

초록

외국의 경우 게놈 연구 및 바이오산업에 DNA 칩을 제작할 수 있는 로봇 시스템을 싼 가격에 사용하고 있으나 우리나라의 경우 자동화 시스템을 비싼 가격에 외국에서 도입하여 사용하기 때문에 바이오산업 및 연구 분야에서의 생산비를 높이게 돼 국내외적으로 생명공학의 경쟁력을 저하시키는 원인이 된다. 따라서, 본 연구에서는 유전체 연구에 필수적인 DNA 칩 제작을 위한 연구용 pin 타입 microarrayer를 개발하였으며, 그 구체적인 연구결과는 다음과 같다. 1. 본 연구에서는 DNA칩 제작을 위한 연구용 pin 타입 microarrayer를 개발하였으며 3축 직교좌표형 로봇 본체, DNA를 묻혀 silylated 슬라이드에 점착하는 DNA 점착 헤드, 칩 및 웰 플레이트 고정부, 핀을 세척 및 건조하는 세척 및 건조장치 등으로 시스템을 구성하였다. 2. DNA 점착 헤드는 DNA 점착시 제도용 펜촉을 사용하도록 설계, 제작하였으며, 슬라이드에 DNA를 점착할 때는 핀이 일정한 힘으로 슬라이드를 누르며 점착할 수 있도록 자석의 반발력을 이용하였다. 3. DNA 점착 헤드 핀의 세척을 위하여 증류수 분사 및 진동 브러쉬를 이용하였으며 세척실험 결과, 핀을 1mm/s로 이동시키며 브러쉬를 통과하도록 하는 방법이 세척효과가 높은 것으로 나타났으며, 핀 건조실험결과는 $8.5kg_f/cm^2$의 압축공기를 30초 동안 핀에 분사하였을 때 핀이 건조되는 것으로 나타났다. 4. 본 로봇 시스템을 이용하여 DNA를 12장의 슬라이드에 모두 점착시키기 위하여 웰 플레이트에서 핀이 DNA를 묻히는 실험을 실시한 결과, 10초 이상 핀에 DNA를 묻혔을 때 슬라이드 12장을 모두 찍는 것으로 나타났으며, 슬라이드에 핀이 1초간 접촉할 때의 DNA 스팟의 크기는 평균$280{\mu}$ 가 되는 것으로 나타났다. 최소 점 간격을 0.32mm로 설정한 후 DNA를 점착해 본 결과 최대 8,100여 점의 DNA 스팟을 한 슬라이드에 점착할 수 있는 것으로 나타났다. 5. 본 로봇 시스템은 12장의 동일 DNA 칩을 생성하기 위해 핀의 세척, 건조, DNA를 묻히는 과정 및 DNA 점착 등의 한 과정을 2분 50초 동안 수행할 수 있는 것으로 나타났다.

This study exploits the robot system which is necessary in gene study, bio-technology industry. As well, it can achieve the job of DNA chip manufacturing whose use rate has been increased recently. The robot consists of DNA spotting device for spotting DNA on the silylated slide and well plate, bed for fixing well-plate, washing & drying device of washing and drying the pin part of DNA spotting device, distillation-water vessel, and discharge vessel of wash water. We made the term of sticking DNA to the pin on well plate to be 15 seconds. The spot size of DNA was set to be 0.28 mm on the average by bringing the slide into contact with pin for 1 second. At this rate, if DNA is spotted in the minimum space possible of about 0.32mm, it can stick about 8,100 DNA spots on the well plate. Analyzing the procedure: Movement starts. Pin washes, dries, and smears DNA on the well plate. Spots DNA onto 12 chips takes 2 minutes and 50 seconds.

키워드