Ductility of Circular Hollow Reinforced Concrete Piers Internally Confined by a Steel Tube

내부 강관 보강 원형 R.C 기둥의 연성 거동 특성

  • 한택희 (고려대학교 토목환경공학과) ;
  • 한상윤 (고려대학교 토목환경공학과) ;
  • 한금호 (고려대학교 토목환경공학과) ;
  • 강영종 (고려대학교 토목환경공학과)
  • Published : 2003.06.30

Abstract

In locations where the cost of concrete is relatively high, or in situations where the weight of concrete members is to be kept to a minimum, it may be economical to use hollow R.C. members. The ductility of circular hollow R.C. columns with one layer of longitudinal and spiral reinforcement placed near the outside face of the section and the steel tube placed on the inside face of the section is investigated. Such hollow sections are confined through the wall thickness since the steel tube is placed. In this study, moment-curvature analyses are conducted with Mander's confined concrete stress-strain relationship. The variables influenced on the ultimate strain is the ratio and yield strength of confining reinforcement and the compression strength for confined concrete. From this ultimate strain - the transverse reinforcement ratio relationship, the transverse reinforcement ratio for circular hollow reinforced columns with confinement is proposed. The proposed transverse reinforcement ratio is confirmed by experimental results.

구조적으로 콘크리트의 자중이 문제 시 되는 곳이나, 콘크리트의 재료비가 높은 경우, 수직부재로 중공 콘크리트의 사용이 경제적일 수 있다. 콘크리트의 구속효과를 발휘를 위해 외측 면을 띠철근으로 보강하고 내측 면에 강관을 삽입하여 보강한 원형 중공 콘크리트 기둥의 연성 거동에 관해 연구하였고, 압축강도와 콘크리트의 극한변형율을 증가시키는 구속력의 효과를 나타낸 Mander의 응력-변형률 관계를 사용하여, 모멘트-곡률 관계 해석을 유도하였다. 극한변형율에 영향을 주는 인자인 구속력을 발휘하는 철근의 철근비와 항복응력, 구속 콘크리트의 압축강도 등을 극한변형율과 횡철근비의 관계를 통하여, 강관 삽입된 원형 중공 철근콘크리트 기둥의 구속응력과 횡철근비의 관계식을 제안하였다. 제안된 횡철근비 관계식은 실험을 통하여 검증하였다.

Keywords

References

  1. F. A. Zahn, R. Park, and M. J N. Priestley, 1990, 'Flexural Strength and Ductility of Circular Hollow Reinforced Concrete Columns without Confinement on inside face', ACI, 3-4, 156-166
  2. F. A. Zahn, R. Park, and M. J N. Priestley, 1990, 'Flexural Strength and Ductility of Circular Hollow Reinforced Concrete Columns without Confinement on inside face', ACI, 3-4, 156-166
  3. J. B. Mander, M. J. N. Priestley, and R. Park, 1988, 'Theoretical Stress-Strain Model for Confined Concrete', ASCE, Journal of Structural Engineering, Vol 114, Number 7-9, 1804-1826
  4. '도로교 설계기준', 건설교통부. 2000
  5. 'Code of Practice for the Design of Concrete Structures', NZS3101, 1982
  6. M. J. N. Priestley, F. Seible, G. M. Calvi, 1995, 'Seismic Design and Retrofit of Bridges', JOHN WILEY & SONS, INC.
  7. M. J. N. Priestley and R. Park, 1987, 'Strength and Ductility of Concrete Bridge Columns under Seismic Loading', ACI Structural Journal, Title no. 84-s8, 61-76