References
- 한국산업안전공단:(KOSHA). (2002). 산업재해통계. Retrieved September 2, 2002, from http://www.kosha.or.kr/
- Andersson, A., Nordgren, B., and Hall, J. (1996).Measurements of movements during highly repetitive industrial work. Applied Ergonomics, 27, 343-344. 35 (2), 283-304
- Forsman, M., Sandsj, L., and Kadefors, R. (1999). Synchronized exposure and image presentation: Analysis of digital EMG and video recordings of work sequences. International Journal of Industrial Ergonomics, 24 (3), 261-272
- Genaidy, A.A.M., Al-Shedi, A., and Shell, R.L. (1993). Ergonomic risk assessment: preliminary guidelines for analysis of repetition, force and posture. Journal of Ergology, 22, 45-55
- Hagg, G.M., ster, J., and Bystrrn, S. (1997). Forearm muscular load and wrist angle among automobile assembly line workers in relation to symptoms. Applied Ergonomics, 28 (1), 41-47
- Hakkanen, M., Viikari-Juntura, E., and Takala, E.P. (1997).Effects of changes in work methods on musculoskeletal load: An intervention study in the trailer assembly. Applied Ergonomics, 28 (2), 99-108
- Hansson, G.A., Balogh, I., Ohlsson, K., Palsson, B., Rylander, L., and Skerfving, S. (2000).Impact of physical exposure on neck and upper limb disorders in female workers. Applied Ergonomics, 31, 301-310
- Hansson, G.A, Balogh, I., Ohlsson, K., Rylander, L., and Skerfving, S. (1996). Goniometer measure- ment and computer analysis of wrist angles and movement applied to occupational repetitive work. Journal of Electromyography and Kinesiology, 6 (1), 23-35
- Juul-kristensen, B., Fallentin, N., Hansson, G.A., Madeleine, P., Andersen, J.H., and Ekdahl, C. (2002).Physical workload during manual and mechanical deboning of poultry. International Journal of Industrial Ergonomics, 29, 107-115
- Juul-kristensen, B., Hansson, G.A., Fallentin, N., Andersen, J.H., and Ekdahl, C. (2001). Assessment of work postures and movements using a video-based observation method and direct technical measurements. Applied Ergono- mics, 32, 517-524
- Ketola, P., Toivonen, R., and Viikari-Juntura, E. (2001). Interobserver repeatability and validity of an observation method to assess physical loads imposed on the upper extremities. Ergonomics,44 (2), 119-131 https://doi.org/10.1080/001401301750048169
- Keyserling. W.M., and Budnick, P.M. (1987). Non-invasive measurement of three dimensional joint angles: Development and evaluation of a
- Armstrong, T.J., Marshall, M.M., Martin, B.J., Foulke, J.A., Grieshaber, C., and Malone G. (2002).Exposure to forceful exertions and vibration in a foundry. International Journal of Industrial Ergonomics, 30, 163-179
- Babski-Reeves, K.L., and Crumtpon-Young, L.L. (2002).Comparisons of measures for quantifying repetition in predicting carpal tunnel syndrome. International Journal of Industrial Ergonomics. 30, 1-6 https://doi.org/10.1016/S0169-8141(02)00072-0
- Bureau of Labor Statistics (BLS). (2002). Workplace Injuries and Illnesses in 2001. Retrieved December 24, 2002, from http://www.bls.gov/
- Carey, E.L. and Gallway, T.J. (2002). Effects of wrist posture, pace and exertion on discomfort. International Journal of Industrial Ergonomics, 29, 85-94
- Chaffin, D.B., Andersson, G.B.J., and Martin, B.J. (1999). Occupational Biomechanics (3rd ed.). New York: John Wiley & Sons
- Chiang, H., Ko, Y., Chen, S., Yu, H., Wu, T., and Chang, P. (1993). Prevalence of shoulder and upper-limb disorders among workers in the fish-processing industry. Scandinavian Journal of Work, Environment and Health, 19 (2), 126-131
- Christensen, H., Sogaard, K., Pilegaard, M., and Olsen, H. (2000).. The importance of the work/rest pattern as a risk factor in repetitive monotonous work. International Journal of Industrial Ergonomics, 25, 367-373
- Ciriello, V.M., Snook, S.H., Webster, B.S., and Dempsey, P. (2001). Psychophysical study of six hand movements. Ergonomics, 44 (10), 922-936
- Colombini, D. (1998). An observa- tional method for classifying exposure to repetitive movements of the upper limbs. Ergonomics, 41 (9), 1261-1289
- Coury, H.J.C.G.. Leo, J.A., and Kumar, S. (2000). Effectsof progressive levels of industrial automation on force and repetitive movements of the wrist. International Journal of Industrial Ergonomics, 25, 587-595
- Drury. C. (1987). A biomechanical evaluation of the repetitive motion injury potential of industrial jobs. Seminars in Occupational Medicine, 2 (1), 41-49
- Fisher, D.L., Andres, R.O., Airth, D.. and Smith, S.S. (1993). Repetitive motion disorders: the design of optimal rate-rest profiles. Human Factors, computer-aided system for measuring working postures. International Journal of Industrial Ergonomics, 1, 251-263 https://doi.org/10.1016/0169-8141(87)90020-5
- Kilborn, A. (1994). Repetitive work of the upper extremities: Part I Guidelines for the practitioner, Part II The scientific basis (knowledge base) for the guide. International Journal of Industrial Ergonomics, 14, 51-86
- Klein, M.G., and Fernandez, J.E. (1997). The effect of posture, duration, and force on pinching frequency. International Journal of Industrial Ergonomics, 20 (4), 267-275
- Konz, S. (1990). Work Design: Industrial Ergonomics (2nd ed.). Columbus: Grid Pub
- Kuorinka, I., and Forcier, L. (1995). Work-related Musculoskeletal Disorders (WMSDs): A reference Book for Prevention. London: Taylor & Francis
- Latko, W., Armstrong, T., Foulke, J., Herrin, G., Rabourn, R, and Ulin, S. (1997). Development and evaluation of an observational method for assessing repetition in hand tasks. American Industrial Hygiene Association Journal, 58 (4), 278-285
- Latko, W., Armstrong, T., Franzblau, A., Ulin, S., Werner, R, and Albers, J. (1999). A cross-sectional study of the relationship musculoskeletal disorders. American Journal of Industrial Medicine, 36, 248-259
- Leskinen, T., Hall, C., Rauas, S., Ulin, S., Tonnes, M., Viikari-Juntura, E , and Takala, E.P. (1997). Validation of portable ergonomic observation (PEO) method using optoelectronic and video recordings. Applied Ergonomics, 28 (2), 75-83
- Lin, M.L., and Radwin, R.G. (1998a). Agreement between a frequency-weighted filter for continuous biomechanical measurements of repetitive wrist flexion against a load and published psychophysical data. Ergonomics, 41 (4), 459-475
- Lin, M.L., and Radwin, R.G. (1998b). Validation of a frequency-weighted filter continuous biomechanical stress in repetitive wrist flexion task against a load. Ergonomics, 41 (4), 476-484
- Lin, M.L., Radwin, R.G., and Snook, S.H. (1997). A single metric for quantifying biomechanical stress in repetitive motions and exertions. Ergonomics, 40 (5), 543-558
- Luchetti, R, Schoenhuber, R., and Nathan, P. (1998). Correlation of segmental carpal tunnel pressures with changes in hand and wrist positions in patients with carpal tunnel syndrome and controls. Journal of Hand Surgery (B), 23 (5), 598-602
- Malchaire, J.B., Cock, N.A., Piette, A, Dutra-Leao, R, Lara, M., and Amaral, F. (1997). Relationship between work constraints and the development of musculoskeletal disorders of the wrist: A prospective study. International Journal of Industrial Ergonomics, 19, 471-482
- Malchaire, J.B., Cock, N.A., and Robert, AR (1996). Prevalence of musculoskeletal disorders at the wrist as a function of angles, forces, repetitiveness and movement velocities. Scandinavian Journal of Work, Environment and Health, 22, 176-181
- Marklin, R.W., and Monroe, J.F. (1998).Quantitative biomechanical analysis of wrist motion in bone-trimming jobs in the meat packing industry. Ergonomics, 41 (2), 227-237
- Melley, B.J., Harris, J.M., and Gramopadhye, A.K. (2000). Predicting the accuracy of visual search performance in the structural inspection of aircraft. International Journal of Industrial Ergonomics, 26, 277-283
- Moore, A, Wells, R, and Ranney, D. (1991). Quantifying exposure in occupational manual tasks with cumulative trauma disorder potential. Ergonomics, 34 (12), 1433-1453
- National Institute for Occupational Safety and Health (NIOSH). (1997). Musculoskeletal Disorders (MSDs) and Workplace Factors: A Critical Review of Epidemiologic Evidence for Work-Related Musculoskeletal Disorders of the Neck, Upper Extremity, and Low Back (2nd printing).Cincinnati: U.S. Department of Health and Human Services (DHHS)
- Norkin, C.C., and White, D.J. (1995). Measurement of joint motion. Philadelphia:F.A. Davis Company
- Petersson, N. F., Mathiassen, S. E., Bjring, G., and Winkel, J. (2000). The accuracy of self-rating of exposure to repetitive work. International Journal of Industrial Ergonomics, 25 (3), 239-246
- Potvin, J.R, Chiang, J., Mckean, C., and Stephens, A. (2000). A psychophysical study to determine acceptable limits for repetitive hand impact severity during automotive trim installation. International Journal of Industrial Ergonomics, 26, 625-637
- Putz-Anderson, V. (1988). Cumulative Trauma Disorders: A manual for musculoskeletal diseases of the upper limbs. New York: Taylor & Francis
- Radwin, R.G., and Lin, M.L. (1993). An analytical method for characterizing repetitive motion and postural stress using spectral analysis. Ergonomics, 36 (4), 379-389
- Rodgers, S. (1986). Ergonomic Design for People at Work. New York: Van Nostrand Reinhold
- Salvendy, G. (1987). Handbook of Human Factors.'New York: John Wiley & Sons
- Serina, E.R., Tal, R., and Rempel, D. (1999). Wrist and forearm postures and motions during typing. Ergonomics, 42 (7), 938-951
- Silverstein, B.A., Fine, L.J., and Armstrong, T.J. (1986). Hand wrist cumulative trauma disorders in industry. British Journal of Industrial Medicine, 43, 779-784
- Silverstein, B.A., Fine, L.J., and Armstrong, T.J. (1987). Occupational factors and carpal tunnel syndrome. American Journal of Industrial Medicine, 11, 343-358
- Spieholz, P., Silverstein, B., Morgan, M.. Checkoway, H., and Kaufman, J. (2001).Comparison of self-report, video observation and direct measurement methods for upper extremity musculoskeletal disorder physical risk factors. Ergonomics, 44 (6), 588-613
- Stal, M., Hansson, G.A., and Moritz, U. (1999). Wrist positions and movements as possible risk factors during machine milking. Applied Ergonomics, 30, 527-533
- Treveltan, F.C., and Haslam, R.A. (2001). Musculoskeletal disorders in a handmade brick manufacturing plant. International Journal of Industrial Ergonomics, 27, 43-55
- Vander-Beek, A.J., and Frings-Dresen, M.H.W. (1998). Assessment of mechnical exposure in ergonomic epidemiology. Occupational and Environmental Medicine, 55, 291-299
- Wick, J. (1994). Force and frequency: how much is too much? In F. Aghazadeh (Ed.), Advances in Occupational Ergonomics and Safety VI (pp. 521-525), IOS Press
- Wilson, J.R., and Corlett, E.N. (1995). Evaluation of Human Work: A practical ergonomics methodology(2nd ed.). Bristol: Taylor & Francis
- Winkel, J., and Mathiassen, S.E. (1994).Assessment of physical workload in epidemiologic studies: concepts, issues and operational considerations. Ergonomics, 37, 979-988
- Yen, Y.T., and Radwin, RG. (1999). Automated job analysis using upper extremity biomechanical data and template matching. International Journal of Industrial Ergonomics, 25, 19-28
- Yen, Y.T., and Radwin, RG. (2000).Comparison between using spectral analysis of electrogoniometer data and observational analysis to quantify repetitive motion and ergonomic changes in cyclical industrial work. Ergonomics, 43 (1), 106-132
- Yun, M.H., Eoh, H.J., and Cho, J. (2002). A two-dimensional dynamic finger modeling for the analysis of repetitive finger flexion and extension. International Journal of Industrial Ergonomics, 29, 231-248
- Yun, M.H., and Kwon, O. (2001). Evaluation of manual workload in repetitive wrist and finger motions: Comparison of frequency-weighted filtering, EMG and subjective rating. Asian Journal of Ergonomics, 2 (2), 73-88