References
- E. M Petrie, 'Handbook of Adhesives and Sealants', McGraw-Hill, New York, 2000
-
L. J. Clark and M A Cosman, 'Use of Permapol
${\circledR}$ P3.1 Polymers and Epoxy Resins in the Formulation of Aerospace Sealants', Int. J. Adhesion and Adhesives, 23, 343 (2003) https://doi.org/10.1016/S0143-7496(03)00002-2 - A Mahon, T. J. Kemp, and R 1. Coates, 'Thermal and Photodegradation of Polysulphide Pre-polymers: Products and Pathways', Polymer Degradation and Stability, 62, 15 (1998) https://doi.org/10.1016/S0141-3910(97)00255-3
- G. B. Lowe, 'The Cure Chemistry of Polysulfides', Int. J. Adhesion and Adhesives, 17, 345 (1997) https://doi.org/10.1016/S0143-7496(97)00026-2
- R Karr, 'Low-Temperature Resistant, Elastic Adhesives and Sealants for Gas Tank Insulation', Cryogenics, 38(1), 119 (1998) https://doi.org/10.1016/S0011-2275(97)00121-5
- M Y. L. Chew and X Zhou, 'Enhanced Resistance of Polyurethane Sealants against Cohesive Failure under Prolonged Combination of Water and Heat', Polymer Testing, 21, 187 (2002) https://doi.org/10.1016/S0142-9418(01)00068-X
- M Y. L. Chew, 'Curing Characteristics and Elastic Recovery of Sealants', Building and Environment, 36, 925 (2001) https://doi.org/10.1016/S0360-1323(00)00047-0
- J. Comyn, F. Brady, R A Dust, M Graham, and A Haward, 'Mechanism of Moisture-Cure of Isocyanate Reactive Hot Melt Adhesives', Int. J. Adhesion and Adhesives, 18, 51(1998) https://doi.org/10.1016/S0143-7496(98)80004-3
- K Shiomoto, 'Concrete Joint Sealants', US Patent 4288354 (1981)
- M J. Grace and J. M Grace, 'Hot Applied Plastisol', US Patent 4900771 (1990)
- E. F. Gola and U. C. Desai, 'Polyvinylchloride Plasti-sol Based Curable Composition', US Patent 4988768 (1991)
- J. M. Grace and M J. Grace, 'Electrophoretic Coatable Sealant Compositions Comprising Polyvinylchloride and Furnace Carbon Black', US Patent 5143650 (1992)
- Y. Nataka and H Tomoyasu, 'Blocked Polyisocyanurate and Poly(Vinyl Chloride) Plastisol Composition Con-taining the Same', US Patent 5204391 (1993)
- A C. Palermo, K F. Schimmel, and M M. Chau, 'Polyvinyl chloride Plastisol Composition Suitable as Sealant', US Patent 5248562 (1993)
- T. Hyunh-Tran, 'Acidic Adhesion Promotors for PVC Plastisols', US Patent 5032432 (1991)
- J. C. Garcia and A Marcella, 'Rheological Study of the Influence of the Plasticizer Concentration in the Gelation and Fusion Processes of PVC' Plastisol', Polymer, 39(15), 3507 (1998) https://doi.org/10.1016/S0032-3861(97)10033-7
- A, Jimenez, L Torre, and J. M Kenny, 'Thennal Degradation of Poly(vinyl chloride) Plastisols Based on Low-migration Polymeric Plasticizers', Polymer Degra-dation and Stability, 73, 447 (2001) https://doi.org/10.1016/S0141-3910(01)00128-8
- E. R. Griffin, 'Adhesion Promotor for PVC Compound s', US Patent 447789 (1995)
- J. Comyn, J. Day and S. 1. Shaw, 'Durability of Alu-minum-Sealant Joints in Jet-Fuel, Water and Antifreeze', Int. J Adhesion and Adhesives, 17, 213 (1997) https://doi.org/10.1016/S0143-7496(97)00006-7
- F. de Buyl, 'Silicone Sealants and Structural Adhesive s', Int. J Adhesion and Adhesives, 21, 411 (2001) https://doi.org/10.1016/S0143-7496(01)00018-5
- J. Comyn, F. de Buyl, N. E. Shephard, and C. Subramaniam, 'kinetics of Cure, Crosslink density and adhesion of Water-reactive Alkoxysilicone Sealants', Int. J Adhesion and Adhesives, 22, 385 (2002) https://doi.org/10.1016/S0143-7496(02)00019-2
- M G. Bouldin, 1. H Collins, and A Berker, 'Rheology and Microstructure of Polymer/Asphalt Blend', Rubber Chern Technol., 64, 577 (1991)
- F. J. Navarro, P. Partal, F. Martinez-Boza, C. Valencia, and C. Gallegos, 'Rheological Characteristics of Ground Tire Rubber-Modified Bitumens', Chemical Engineering Joumal, 89, 53 (2002) https://doi.org/10.1016/S1385-8947(02)00023-2
- F. R Davis, 'Method of ModifYing Asphalt with Ther-moplastic Polymers, Ground Rubber and Composition Produced', US Patent 4485201 (1984)
- J. Comyn, J. Day and S. J. Shaw, 'Effect of Surface Treatment on the Durability of aluminum Joints Bonded with a Butadiene-Acrylonitrile-Epoxide sealant', Int. J Adhesion and Adhesives, 20, 77 (2000) https://doi.org/10.1016/S0143-7496(99)00022-6
- M Lavery, 'Sealants in the Automotive Industry', Int. J Adhesion and Adhesives, 22, 443 (2002) https://doi.org/10.1016/S0143-7496(02)00026-X
- 원호연, 김일원, '가소제의 제조 특성 및 용도', 고분자 과학과 기술, 6(2), 101 (1995)
- John T. Lutz, JR, 'Thermoplastic Polymer Additives', Marcel Dekker Inc., New York and Basel, 1989
- D. G. Baird and D. I. Collias, 'Polymer Processing', Butterworth-Heinemann, Boston, 1995
- S. Shin, '신규 내제트유성 실란트의 개발(Develo-pment of A New Jet-Fuel Resistant Sealant)', Thesis, Kunsan National University, 2001
- M Y. L. Chew, 'Joint Sealant for Wall Cladding', Polymer Testing, 19, 643 (2000) https://doi.org/10.1016/S0142-9418(99)00038-0