DOI QR코드

DOI QR Code

자의적 등척성 작업에서 몸통 근육의 기능적 발휘 형태 분석

Analysis of functional roles of ten trunk muscles in voluntary isometric exertion tasks

  • 송영웅 (포항공과대학교 산업공학과) ;
  • 정민근 (포항공과대학교 산업공학과)
  • 발행 : 2003.11.30

초록

This study investigated the recruitment patterns of ten trunk muscles in isometric exertion tasks, focused on the functional roles (agonist or antagonist). Twelve male students performed maximum voluntary isometric exertion tasks towards six directions: flexion/extension, left/right lateral bending, and clockwise/counter-clockwise twisting. EMG signals from ten trunk muscles and exertion forces were collected. Normalized EMG (NEMG) values were calculated at 10, 20, 30, 40, 50, 60, 70, 80, and 90 %MVC. The subjects showed a limited capacity in producing twisting moments, approximately 50% of the extension moment, and 70% of lateral bending moments. EMG activity was dependent on the direction and magnitude of the exertion, and also on the functional role. The mean NEMG of agonist was 0.260 and 0.067 for antagonist. Agonists showed the highest mean NEMG in flexion (0.367), while antagonists showed the highest mean NEMG in twisting clockwise/counter-clockwise (0.090/0.106).

키워드

참고문헌

  1. 노동부, (2002). 2001 산업재해분석, 13-16.
  2. Andrews, J. G. and Hay, J. G., (1983). Biomechanical Considerations in the Modeling of Muscle Function. Acta Morphologica Neerlando Scandinavica,21(3), 199-223.
  3. Cholewicki, J., McGill, S. M. and Norman, R. W., (1995). Comparison of Muscle Forces and Joint Load from an Optimization and EMG assisted Lumbar Spine Model: Towards Development of a Hybrid Approach. Journal of Biomechanics, 28(3), 321-331. https://doi.org/10.1016/0021-9290(94)00065-C
  4. Dumas, G. A., Poulin, M., Roy, B., Gagnon, M. and Jovanovic, M., (1988). A Three-Dimensional Digitization Method to Measure Trunk Muscle Lines of Action. Spine, 13, 532-541. https://doi.org/10.1097/00007632-198805000-00017
  5. Granata, K. P. and Marras, W. S., (1995). The Influence of Trunk Muscle Coactivity on Dynamic Spinal Loads. Spine, 20(8), 913-919. https://doi.org/10.1097/00007632-199504150-00006
  6. Hughes, R.E., (1991). Empirical Evaluation of Optimization-based Lumbar Muscle Force Prediction Models. Ph.D. Dissertation. Ann Arbor, Michigan: University of Michigan.
  7. Kee D. and Chung M. K., (1996). Comparison of Prediction Models for the Compression Force on the Lumbarsacral Disc. Ergonomics, 39 (12), 1419-1429. https://doi.org/10.1080/00140139608964561
  8. Kim, S. H. and Chung, M. K., (1995). Effects of Posture, Weight and Frequency on Trunk Muscular Activity and Fatigue during Repetitive Lifting Tasks. Ergonomics, 38(5), 853-863. https://doi.org/10.1080/00140139508925156
  9. Kumar, S., (1996). Isolated Planar Trunk Strengths Measurement in Normals: Part III - Results and Database. International Journal of Industrial Ergonomics, 17, 103-111. https://doi.org/10.1016/0169-8141(95)00042-9
  10. Lavender, S. A., Tsuang, Y. H., Hafezi, A., Andersson, G. B. J., Chaffin, D. B. and Hughes, R. E., (1992). Coactivation of the Trunk Muscles during Asymmetric Loading of the Torso. Human Factors, 34(2), 239- 247. https://doi.org/10.1177/001872089203400209
  11. Marras, W. S., (2000). Occupational Low Back Disorder Causation and Control. Ergonomics, 43(7), 880-902. https://doi.org/10.1080/001401300409080
  12. Marras, W. S. and Granata, K. P., (1995). A Biomechanical Assessment and Model of Axial Twisting in the Thoracolumbar Spine. Spine, 20(13), 1440-1451. https://doi.org/10.1097/00007632-199507000-00002
  13. Mital, A., (1991). Designing and Analysis of Multiple Activity Manual Materials Handling Tasks. In Pault, B.M. and Alexander, D.C. (Eds), Industrial Ergonomics: Case Studies, 29-40, McGraw-Hill, Inc., New York.
  14. Ng, J. K. F., Parnianpour M., Richardson C. A. and Kippers V., (2001). Functional Roles of Abdominal and Back Muscles during Isometric Axial Rotation of the Trunk. Journal of Orthopaedic Research, 19, 463-471. https://doi.org/10.1016/S0736-0266(00)90027-5
  15. Parnianpour, M., Nordin, M., Khanovitz, N. and Frankel, V., (1988). The Triaxial Coupling of Torque Generation of Trunk Muscles during Isometric Exertions and the Effect of Fatiguing Isoinertial Movements on the Motor Output and Movement Patterns. Spine, 13, 982-992. https://doi.org/10.1097/00007632-198809000-00004
  16. Raschke, U., (1994). Lumbar Muscle Activity Prediction under Dynamic Sagittal Plane Lifting Conditions: Physiological and Biomechanical Modeling Considerations, Ph.D. dissertation. Ann Arbor, Michigan: University of Michigan.
  17. Schultz, A. B. and Andersson,G. B. J., (1981). Analysis of Loads onthe Lumbar Spine. Spine, 6(1), 76-82. https://doi.org/10.1097/00007632-198101000-00017
  18. Thelen, D. G., Schultz, A. B., and Ashton-Miller, J. A., (1995). Co-contraction of Lumbar Muscles during the Development of Time-varying Triaxial Moments. Journal of Orthopaedic Research, 13, 390-398. https://doi.org/10.1002/jor.1100130313