Abstract
Physical separation containing grinding, sieving, dry magnetic separation and air classification were carried out in order to recover Ta anode from waste Ta condenser. Roll crusher wat used for the liberation of resin and metals in closed circuit system. The liberation between Ta anode and resin was easily achieved, whereat some of metals did not liberated from the Ta anode when the waste condenser was crushed below 8 mesh. When the crushed sample were divided into 8/10 mesh, 10/18 mesh and -18 mesh, metals was mainly remained in 8/10 mesh in contrast to Ta anode was in +18 mesh. It was shown that resin was more easily crushed rather than metals from the result of that resin content was 71.5% in -18 mesh. The liberation efficiency was different with the input size of the crushed sample and average efficiency was 62.3% due to the locked Ta anode particles. The results of air classification test for the crushed samples showed that optimal air flow are 39㎥/h, 32㎥/h, 20㎥/h. respectively. When the sample were separated with optimal condition, 94.45% Ta anode containing 97.47 wt.% Ta anode, 0.93 wt.% resin. 1.61 wt.% metal was recovered with 49.39 wt.% yield.
폐 탄탈륨 콘덴서에 함유된 탄탈륨 anode를 물리적인 방법으로 회수하고자 파쇄, 입도분리, 건식 자력선별 그리고 공기 분급 실험을 수행하였다. 단체분리를 위해 롤 크럿셔를 사용하여 폐회로 공정에서 8mesh 이하로 파쇄하면. 대부분의 탄탈륨 anode는 레진과의 단체분리는 이루어지나 일부 금속과의 단체분리가 되지 않은 상태로 남게된다. 파쇄된 시료를 8/10 mesh, 10/18 mesh, -18 mesh 로 분립한 결과, 금속물질은 8/10 mesh 입자에, 탄탈륨 anode는 +18 mesh에 주로 분포하며, -l8 mesh에는 레진의 함량이 71.5%로 레진이 탄탈륨 anode나 금속물질보다 미립화가 쉽게 이루어짐을 알 수 있었다. 자력선별에 의한 금속 물질의 분리효율은 원료의 입도에 따라 크게 차이가 있으나, 일부 금속물질이 약자성체이거나 탄탈륨anode와 단체분리가 이루어지지 않아 금속물질 제거율은 62.3%로 비교적 저조하였다. 탄탈륨 anode와 레진의 분리를 위한 입도별 공기 분급실험 결과, 각 입도별 최적 공기량은 각각 39㎥/h, 32㎥/h, 20㎥/h로 나타났다. 최적의 조건으로 회수한 탄탈륨 anode 생산율은 49.39wt.%, 각 성분의 함량은 97.47wt.% 탄탈륨 anode, 0.93wt.% 레진. 1.51 wt.% 금속으로 탄탈륨 anode 실수율은 94.45%이었다.