A Minimum Cost Model for Merging Production Process with Final Product Quality Constraints

최종품질제약하의 병합공정을 갖는 생산라인의 최소비용 모형

  • Published : 2003.12.01

Abstract

Recently many researchers contributed to the understanding of Quality Control System, but the use of economics in the design of quality assurance system is limited in treatment of the relationship between the average incoming quality level (or average process quality level) of the incoming lot and the average outgoing quality level of this lot. In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceeding and succeeding production process including inspection process. This approach recognizes that the decision at each manufacturing process (or assembly process), is to be determined not only by the cost and the average outgoing quality level of that process, but also by the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing or assembly process quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a general product manufacturing system with specified average outgoing quality limit are suggested.

Keywords

References

  1. Dodge, Harold F. and Romig, Harry G., Sampling Inspection Tables-Single and Double Sampling, 2nd ed. 1959, John Wiley & Sons Inc.
  2. Montgomery, Douglas C., Introduction to Statistical Quality Control, 4th ed. 2001, p691, John Wiley & Sons Inc.
  3. Ercan, S. S., Hassan, M. Z. and Taulananda, A. (1974), 'Cost Minimizing Single Sampling Plans with AIQL and AOQL Constraints ' Management Science, Vol20, No7, pp1112-1121
  4. Dietrich, D. L. (1971) 'A Bayesian Quality Assurance Model for A Multi Stage Production Process' Management Science, Vol 17, No 8, pp556-pp568
  5. Quality Cost Technical Committee (1967), 'Quality Cost -What and How', Quality Progress, American Society for Quality Control, Vol 10, No2, pp36 - pp41
  6. Turner, T. E. (1969), 'an Economic Look at Quality' Quality Progress, American Society for Control, Vol 12, No 4, pp16 - pp20
  7. Cho, B. R. and Govindaluri, M. S.(2002), 'Optimal Screening Limits in Multi-Stage Assemblies', Int. J, of Prod. Res., Vol.40, No.9, pp1993-2009
  8. Riberio, J. L. D., Fogliatto, F. S. and Caton, C. S., (2000) 'Minimizing Manufacturing and Quality Costs in Multiresponse Optimaization', Quality Engineering, Vol.13, No.2, pp191-201
  9. Schilling, E. G., Sheesley, J. H. and Anselmo, K. J.(2002) 'Minimum Average Total Inspection Plans for Variables Sampling, Indexed by Average Outgoing Limit', Quality Engineering, Vol. 14, No.3, pp435-451
  10. Tagaras, G. and Lee, H. L.(1992) 'Economic acceptance sampling plans in complex multi-stage production systems,' International Journal of production research, Vol.30, No.11, pp2615-2632
  11. 김윤선, 황의철, (1981) '계수 선별형검사 설계의 경제성에 관한 연구,' Journal of the KSQC, Vol.9, No.1, pp40- 45
  12. 이경종, 이상용 (1993) '비용을 고려한 계수치 2 단계 샘플링방법의 경제적설계, 'Journal of the KSQC,,Vol.21, No.1, pp35-43
  13. 이병근, 정재경 (1985) '계수 선별형 샘플링 검사의 경제성연구' Journal of the KSQC, Vol.13, No.2, pp48-55
  14. 이상용 (1979) '경제적 검사방식의 채택올 위한 계량적 접근방식의 유형과 그 특징의 비교 'Journal of the KSQC, Vol.7, No.7, pp17-21
  15. 이상용 (1976) '최적품질설계를 위한 비용, 품질 제조시간 종합적 최적화방안', 품질관리학회지, 제4권, 제1호, pp13-19
  16. 조충호, 김성인(1983) '선별형검사의 경제성에 관한 연구 'Journal of the KSQC, Vol.11, No.2, pp.37-41
  17. 황의철, 정영배(1980) '파괴검사에 있어서 최소비용 샘플링검사방식의 결정에 관한 연구,' Journal of the KSQC, Vol.8, No.2, pp15-22