콘크리트학회논문집 (Journal of the Korea Concrete Institute)

  • 제15권5호
  • /
  • Pages.739-746
  • /
  • 2003
  • /
  • 1229-5515(pISSN)
  • /
  • 2234-2842(eISSN)
한국콘크리트학회 (Korea Concrete Institute)
권호 표지
DOI QR코드

DOI QR Code

Adhesive Strength in Tension of High Volume PAE-Modified Cement Mortar with High Flowability for Floor Finishing

  • Do, Jeong-Yun (Dept. of Architectural Engineering, Chonbuk National University) ;
  • Soh, Yang-Seob (Dept. of Architectural Engineering, Chonbuk National University)
  • 발행 : 2003.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Various researches on the application of polymer dispersions to the cement mortar and concrete have been carried out in many countries like America, Japan and Germany and so on due to their high performance and good modification effect. PAE of polymer dispersion widely used in situ was employed that the high flowability may be induced in the cement mortar. In order to investigate the modification of cement mortar with high flowability by PAE and fracture mode of adhesive strength properties in tension of that, experimental parameters were set as PAE solid-cement ratio(P/C) and cement: fine aggregate(C:F) and the experiments such as unit weight, flow, consistency change, crack resistance and segregation that inform on the general properties have been done. Adhesion in tension is measured with a view to comprehending the properties and fracture mode in tensile load. Consistency change of cement mortar modified by PAE did grow better as the ratio of PAE solid-cement increased and was much superior to that of resin based flooring such as polyurethane and epoxy which recorded the loss of consistency in 90 min. after mixing. Adhesive strength in tension increased with continuity during curing period and showed the maximum in case of C:F=1:1 and P/C=20%.

키워드

참고문헌

  1. Y. Ohama and K. Demura, et al., 'Adhesion of Polymermodifed mortars to ordinary cement mortar by differenttest methods, Adhesion between Poymer and Concrete, 'Proceedings of an international symposium organized by RILEM, Chapman and Hall, London, 1986, pp.719-729
  2. Paree k, S.N., Ohama, Y., and Demura, K., 'Adhesion of Bonded Mortars to Polymer-Cement Paste Coated Mortar Substrates,' Proceedings of the International Conference on Interfaces in Cementitious Composites, E&FNSpon, Oct. 1992, pp.89-98
  3. Y. Ohama, 'Handbook of Polymer-Modified Concrete and Mortars' Noyes Publications, Park Ridge, NewJersy, USA, 1995, pp. 13~20 and pp. 111~120
  4. J. Alexanderson, 'Polymer Cement Concrete for Industrial FIoors, Proceeding of the International Congress on Polymer in Concrete,' college of Engineering, Nihon University, Koriyama, Japan, 1982, pp.360~373
  5. M. Tamai, et al., 'Properties of High Polymer cementmortar,' Proceeding of 3-EASPIC, E&FN Spon, London,1997,pp.131~140
  6. H. Abeyruwan, 'The Thermal Influence on the Bond of Polymer-modified Concrete Overlays,' Proceeding of $\square$-EASPIC, E&FN Spon, London, 1997, pp.315~322
  7. W.K. Kim, 'Development of Polymer Cement Mortar Using Prepakaged Redispersible powder,' Doctoral dissertation, Nihon University, Koriyama, Japan, 1997
  8. J.Y. Do and Y.S. Soh, 'A Study on the Development of Polymer-Modified Cementitious Self-Leveling Materialswith Thin Coat,' International Journal of KCI, Vol.13 No.2, June 2001, pp.66~71
  9. W.H. Peier, Adhesion Testing of Polymer Modified Cement Mortars, Adhesion between Polymer and Concrete,RiLEM, 1986,pp.730~740
  10. Kim, W. K., Ohama, Y., Jo, Y. K., and Soh, Y. S.,Strengths and Adhesion of Polymer-Modified Mortarsas Surface Preparation Materials for Floor Topping with Polymer Mortar, Proceedings of the ArchitecturalInstitute of Korea, Vol.18, No.2, Oct. 1998, pp.605~610.(in Korean)
  11. Chandra, S. and Ohama, Y., 'Polymer in Concrete,'CRC, 1994
  12. J.Y. Do and Y.S. Soh, 'Performance of polymer-modified self-leveling mortars with high polymer-cement ratio for floor finishing,' Cement and Concrete Research, Vol.33, No.10, Sep. 2003, pp.1497~1505 https://doi.org/10.1016/S0008-8846(02)01057-8