초록
현재 건설생산현장에서 이루어지고 있는 거푸집 제거 시기 결정, 설계기준강도 확보 등의 강도관리는 그 시점을 예측할 수 없다는 단점이 있기 때문에 건설생산현장에서의 공정계획 및 강도관리에서 한계가 있을 수밖에 없다. 이에 따라 콘크리트의 강도를 예측할 수 있으면 보다 합리적인 강도관리 및 공정계획이 가능하게 된다. 본 연구는 적산온도 방법에 의해 새로 제안된 강도예측모델의 적용가능성을 검증하기 위해 기존 강도예측모델 중 Logistic 모델과 비교 평가하였으며, 모의부재에서 채취한 코어공시체와 현장양생공시체의 압축강도를 비교 평가한 후 새로운 강도예측모델에 의해 강도를 예측하여 거푸집 제거시기를 결정하는 것에 대한 합리성을 검증하고자 하였다. 실험결과 Freiesleben의 활성화에너지를 이용한 등가재령함수에 있어서 콘크리트의 강도는 양생온도에 관계없이 유사한 강도수준을 나타내고 있으나 강도-적산온도의 상관성을 높이기 위해서는 등가재령 계산시 이용되는 활성화에너지에 대한 검토가 필요할 것으로 사료된다. 새로 제안된 모델의 경우 Logistic 모델에 비해 초기재령에 있어서 강도예측이 보다 정확한 것으로 나타났으며, SSE는 작고 결정계수는 높게 나타나고 있어 이를 이용한 강도예측이 보다 합리적일 것으로 판단된다. 본 연구의 범위 내에서 양생온도 10~15$^{\circ}C$의 경우 강도관리 측면에서 새로운 강도예측모델 사용시 압축강도 50kgf/${cm}^2$ 발현시점이 기존에 제안된 기간과 비교하여 빠르게 나타나고 있어 이를 건설생산현장에서 적용할 경우 거푸집제거시기의 단축에 의한 공기단축이 가능할 것으로 사료된다.
Construction plan and strength control have limitations in construction production field because it is difficult to predict the form removal strength and development of specified concrete strength. However, we can have reasonable construction plan and strength control if prediction of concrete strength is available. In this study, firstly, the newly proposed strength prediction model with maturity method was compared with the logistic model to test the adaptability. Secondly, the determination of time of form removal was verified through the new strength prediction model. As the results, it is found that investigation of the activation energy that are used to calculate equivalent age is necessary, and new strength prediction model was proved to be more accurate in the strength prediction than logistic model in the early age. Moreover, the use of new model was more reasonable because it has low SSE and high decisive factor. If we adopt new strength prediction model at construction field, we can expect the reduced period of work through the reduced time of form removal.