Abstract
Reinforced concrete beams are often retrofitted with various FRP composite sheets. This paper is focused on the comparison of structural performance of various FRP sheets and proposal of the retrofitting design formula. Effects of the FRP kinds(AFRP, GFRP, CFRP) and the reinforcing steel ratio on behavior of the retrofitting beams are tested and analyzed with particular emphasis on the maximum load capacity, stiffness, and ductility. The experimental work included 4 point flexural testing of 3.2m span reinforced concrete beams with bonded external reinforcements. The results show that the difference of FRP kinds is not large and the flexural load capacity is mainly affected by stiffness of the retrofitting materials. This paper also proposes the design formula on the retrofitting reinforced concrete flexural members and checks with this experimantal work and previous research results.
섬유보강재를 사용한 철근콘크리트 부재의 보강공법은 재료의 내부식성 및 시공의 편리성 등 여러 가지 장점으로 인하여 최근 그 사용이 현저하게 증가하고 있는 실정이다. 본 연구에서는 여러 가지 종류의 섬유보강재를 사용하여 휨보강된 철근콘크리트 보의 휨성능을 비교하고, 그 특성을 고려한 보강설계식을 제안하였다. 섬유보강재의 종류(아라미드, 유리, 탄소섬유) 및 보강비에 따른 철근콘크리트 보의 휨성능을 검토하기 위하여 3.2m 스팬의 단순보에 대한 실험을 실시하였으며, 실험의 결과를 최대내력, 강성 및 연성도의 관점에서 분석하였다. 본 연구의 실험결과, 부재의 휨보강내력은 보강재의 종류에 따른 인장강도보다는 강성에 주로 관계하는 것으로 나타났으며, 연성도는 강성이 증가할수록 감소하는 경향을 나타내었다. 본 연구에서는 이와 같은 실험결과를 기반으로 휨보강설계식을 제안하였으며, 이를 신뢰성있는 선행 연구자들의 연구결과와 비교하여 그 타당성을 검증하였다.