DOI QR코드

DOI QR Code

The Effect of Damping of a Two-degree-of-freedom Model for the Disc Brake Squeal Noise

2자유도계 모델을 이용한 디스크 브레이크 스퀼 소음에 대한 댐핑의 영향에 관한 연구

  • 신기홍 (한양대학교 대학원 자동차공학과) ;
  • 조용구 (한양대학교 기계공학부) ;
  • 오재응 (국립안동대학교 기계공학부)
  • Published : 2003.12.01

Abstract

A two-degree-of-freedom model is suggested to describe basic dynamical behaviors of the interaction between the pad and the disc of a disc brake system. Although a pad (and a disc) has many modes of vibration in practice, only one mode of each component Is considered. In this paper, a linear analysis is performed by means of the stability analysis to show various conditions for the system to become unstable, and is based on the assumption that the existence of limit cycle (this corresponds to an unstable equilibrium point inside the limit cycle) represents the squeal state of the disc brake system. The results of the stability analysis show that the damping of the disc is as much Important as that of the pad, whereas the damping of the pad only is considered In most practical situations.

Keywords

References

  1. Brooks P. C. Crolla D. A. Lang A. M. and Schafer D. R.. 1993, 'Eigenvalue Sensitivity Analysis Applied to DiscBrake Squeal.' Proceedings of IMechE, Vol. C444/004/93, pp. 135-143
  2. Crolla D. A. and Lang A. M.. 1990. 'Brake Noise and Vibration - The State of the Art,' Proceedings of 17th Leeds - Lyon Symposium on Tribology. The University of Leeds, UK. pp. 165-174
  3. Earles S. W. E. and Chambers P. W.. 1987. 'Disc Brake Squeal Noise Generation: Predicting its Dependency on System Parameters Including Damping.' International Journal of Vehicle Design Vol. 8. No. 4/5/6. pp. 538-552
  4. North M. R.. 1976. 'Disc Brake Squeal.' IMechE Conference on Braking of Road Vehicles. Vol. C38/76. pp. 169-176
  5. Ghesquiere H.. 1992. 'Brake Squeal Noise Analysis and Prediction.' Proceedings of IMechE. Vol. C389/257. pp. 175-181
  6. Earles S. W. E. and Chambers P. W.. 1988. 'Disc Brake Squeal - Some Factors which Influence its Occurrence.' Proceedings of IMechE. Vol. C454/88. pp. 39-46
  7. Lee Y. S.. Brooks P. C.. Barton D. C. and Crolla D. A.. 1999. 'A Study of Disc Brake Squeal Propensity Using a Parametric Finite Element Model.' Proceedings of IMechE. Vol. C521/009/98. pp. 191-201
  8. Matsui H.. Murakami H.. Nakanishi H. and Tsuda Y.. 1992. 'Analysis of Disc Brake Squeal.' SAE Paper 920553. pp. 15-24
  9. Fieldhouse J. D. and Newcomb T. P.. 1993. 'An Experimental Investigation Into Disc Brake Noise.' Proceedings of IMechE. Vol. C444/036/93. pp. 145-159
  10. Nosseir T. A.. Said M. A. R.. EL Nahas N. S. and El Fetouh G. Abu. 1998. 'Significance of Squeal in Disc Brake Design,' International Journal of Vehicle Design. Vol. 19. No.1. pp. 124-133
  11. Popp K. and Stelter P.. 1990. 'Stick-slip Vibrations and Chaos'. Phil. Trans. R. Soc. Land. A'. Vol. 332. pp. 89-105 https://doi.org/10.1098/rsta.1990.0102
  12. Ogata K.. 1970. Modern Control Engineering. Prentice-Hall. pp. 252-258
  13. Jakobsen. J.. 1986. 'On Damping of Railway Brake Squeal.' Noise Control Engineering Journal. September-October. pp. 46~51
  14. Earles S. W. E. and Chambers P. W.. 1985. 'Predicting Some Effects of Damping on the Occurrence of Disc-brake Squeal Noise,' ASME WAM Proc. Dynamic Systems & Control
  15. 조용구. 신기홍. 이유엽. 유재응. 2002. '마찰기인 2자유도계 시스템의 자려진동에 대한 댐핑의 영향.' 한국소음진동학회논문집. 12권. 제 7호. pp. 502-509

Cited by

  1. Analyses on Working Frequency of A γ-type Free-piston Stirling Engine vol.23, pp.7, 2013, https://doi.org/10.5050/KSNVE.2013.23.7.654