References
- Manganello, S. J. and R. D. Forrest, 'Metallurgical Factors Affecting the Ballistic Behavior of Sheet Targets,' Journal of Materials, Vol. 7, No. 2, pp. 231-239,1972
- U.S. Army Research Laboratory, 'Military Standard, V50 Ballistic Test for Armor, MIL-STD-662E,' Dept. of the Navy, Defense Printing Service, Philadelphia, PA,1984
- U.S. Army Test Evaluation Command, 'U.S. Army Test Operations Procedure 2-2-710 Ballistic Test for Armor,' A137973, U.S. Army Test Evaluation Command, Aberdeen Proving Ground, MD 21005
- Backman, M. E. and Goldsmith, W., 'The Mechanics of Penetration of Projectiles into Targets,' International Journal of Engineering Science, Vol. 16, pp. 1-99, 1978 https://doi.org/10.1016/0020-7225(78)90002-2
- Zukas, J. A., Nicholas, T., Swift, H. F, Greszczuk, L. B. and Curran, D. R., Penetration and Perforation of Solid, Impact Dynamics, Zukas, J. A., et aI., John Wiley and Sons, New York, pp. 155-183, 1982
- Jang-J, Park-R, Yun-Y, Park-J and Kim-H, 'Failure of Ceramic/Fiber-Reinforced Plastic Composites Under Hypervelocity Impact Loading,' Journal of Materials Science, Vol. 32, No.1, pp. 23-33.1997 https://doi.org/10.1023/A:1018550411227
- Crouch, I. G., 'Metallic Armor-from Cast Aluminum alloys to High-Strength Sheets,' Materials Forum, Vol. 12, pp. 31-37, 1988
- U.S. Army Research Laboratory, 'Military Standard, V50 Ballistic Test for Armor, MIL-STD-662E,' Dept. of the Navy, Defense Printing Service, Philadelphia, PA,1984
- Kim, C.-H., 'Fractographic Studies in Ballistically Damaged Polycrystalline Alumina,'Journal of the Korean Ceramic Society, Vol. 15, No.3, pp 127-134, 1978
- Orphal DL, Franzen RR, Piekutowski AJ, Forrestal MJ, 'Penetration of Confined Aluminum nitride targets by Tungsten rods at 1.5-4.5km/s,' International J. of Impact Eng., Vol. 18, pp. 355-386, 1996 https://doi.org/10.1016/0734-743X(95)00045-C
- Forrestal MJ, Okajima K, Luk VK, 'Penetration of 6061-T651 Aluminum targets with Rigid long rods,' ASME J Appl Mech, Vol. 55, pp. 755-760,1988 https://doi.org/10.1115/1.3173718
- Nair-SV, Subramaniam-A, Goettler-LA, 'Fracture-Resistance of Polyblends and Polyblend Matrix Composites .2. Role of the Rubber Phase in Nylon 6,6/ABS Alloys,' Journal of Materials Science, Vol. 32, No. 20, pp. 5347-5354. 1997 https://doi.org/10.1023/A:1018670928878
- John F. Chinella and Martin G. H. Wells, 'Ballistic Penetration and Fracture Modes of an austempered ductile iron and AISI 4140 Steels,' Structures Under Extreme Loading Conditions- 1998, ASME, PVP-Vol. 361, pp. 37-53,1998
- Sohn, S. W., Kim, H. J., Hwang, D. Y. and Hong, S. H., 'A Study on the fracture behavior of surface hardening treated aluminum alloy under the high velocity impact,' Proceeding of the Korean Society of Precision Engineering, pp. 784-789, 2001
- Sohn, S. W., Kim, H. J., Hwang, D. Y. and Hong, S. H., 'A Study on the fracture behavior of surface treated A1 5083-H131 alloy under the high velocity impact,' Proceeding of the Korean Society of Precision Engineering, pp. 820-824, 2001
- Sohn, S. W., Lee, D. S., Kim, Y. T. and Hong, S. H., 'A Study on perforation behavior of Aluminum 5052-H34 alloy by high velocity impact,' Proceeding of Korean Society of Mechanical Engineers Part A, pp. 174-179, 2001
- Sohn, S. W., Kim, H. J., Kim, Y. T. and Hong, S. H., 'A Study on the resistance of surface hardening treated Aluminum, Titanium alloy under the high velocity impact,' Proceedings of the Korean Society of Precision Engineering, pp. 852-855,2002