Archives of Pharmacal Research

  • 제26권1호
  • /
  • Pages.76-82
  • /
  • 2003
  • /
  • 0253-6269(pISSN)
  • /
  • 1976-3786(eISSN)
대한약학회 (The Pharmaceutical Society of Korea)
권호 표지

Growth Factor Releasing Porous Poly (${\varepsilon}-caprolactone$)-Chitosan Matrices for Enhanced Bone Regenerative Therapy

  • 발행 : 2003.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Drug releasing porous poly($\varepsilon$-caprolactone) (PCL)-chitosan matrices were fabricated for bone regenerative therapy. Porous matrices made of biodegradable polymers have been playing a crucial role as bone substitutes and as tissue-engineered scaffolds in bone regenerative therapy. The matrices provided mechanical support for the developing tissue and enhanced tissue formation by releasing active agent in controlled manner. Chitosan was employed to enhance hydrophilicity and biocompatibility of the PCL matrices. PDGF-BB was incorporated into PCL-chitosan matrices to induce enhanced bone regeneration efficacy. PCL-chitosan matrices retained a porous structure with a 100-200 $\mu$m pore diameter that was suitable for cellular migration and osteoid ingrowth. $NaHCO_3$ as a porogen was incorporated 5% ratio to polymer weight to form highly porous scaffolds. PDGF-BB was released from PCL-chitosan matrices maintaining therapeutic concentration for 4 week. High osteoblasts attachment level and proliferation was observed from PCL-chitosan matrices. Scanning electron microscopic examination indicated that cultured osteoblasts showed round form and spread pseudopods after 1 day and showed broad cytoplasmic extension after 14 days. PCL-chitosan matrices promoted bone regeneration and PDGF-BB loaded matrices obtained enhanced bone formation in rat calvarial defect. These results suggested that the PDGF-BB releasing PCL-chitosan porous matrices may be potentially used as tissue engineering scaffolds or bone substitutes with high bone regenerative efficacy.

키워드

참고문헌

  1. Benicewicz, B. C. and Hopper, P, K., Polymers for absorbable surgical sutures. J. Bioact. Compat. Polym., 6, 64-94 (1991) https://doi.org/10.1177/088391159100600106
  2. Canalis, E., McCarthy, T. L. and Centrella, M., Effects of platelet-dervied growth factor on bone formation in vitro. J. Cell Physiol., 140, 530-537 (1989) https://doi.org/10.1002/jcp.1041400319
  3. Corden, T. J., Jones, I. A., Rudd, C. D., Christian, P., Downes, S., and Mcdougall, K. E., A novel manufacturing technique for long-fibre composite materi Physical and biocompatibility properties of poly-$\varepsilon$-caprolactone produced using in situ polymerization als. Biomaterials, 21, 713-724 (2000) https://doi.org/10.1016/S0142-9612(99)00236-7
  4. Damien, J. C. and Parson, J. R., Bone graft and bone graft substitutes: A review of current technology and applications. J. Appl. Biomater., 2, 187-208(1991) https://doi.org/10.1002/jab.770020307
  5. Du, C., Cui, F. Z., Zhu, X. D. and Groot, K., Three-dimensional nano-Hap/collagen matrix loading with osteogenic cells in organ culture. J. Biomed. Mater. Res., 44, 407-415 (1999) https://doi.org/10.1002/(SICI)1097-4636(19990315)44:4<407::AID-JBM6>3.0.CO;2-T
  6. Eiselt, P., Yeh, J., Latvala, R. K., Shea, L. D. and Mooney, D. J., Porous carriers for biomedical applications based on alginate hydrogels. Biomaterials, 21, 1921-1927 (2000) https://doi.org/10.1016/S0142-9612(00)00033-8
  7. Holland, S., Tighe, B. J. and Gould, P. L., Polymers for biodegradable medical devices. I. The potential of polyesters as controlled macromolecular release systems. J. Control Release, 4, 155-180 (1986) https://doi.org/10.1016/0168-3659(86)90001-5
  8. Hubbell, J. A., Biomaterials in tissue engineering. Bio/Technol., 13, 565-75 (1995) https://doi.org/10.1038/nbt0695-565
  9. Ishaug, S. L., Crane, G. M., Miller, M. J., Yasko, A. W., Yaszemski, M. J. and Mikos, A. G., Bone formation by three-dimensional stomal osteoblase culture un biodegradable polymer scaffolds. J. Biomed. Mater. Res., 36, 17-28 (1997) https://doi.org/10.1002/(SICI)1097-4636(199707)36:1<17::AID-JBM3>3.0.CO;2-O
  10. Klawitter, J. J. and Hulbert, S. F., Application of porous ceramics for the attachment of load-bearing orthopedic applications. J. Biomed. Mater. Res. Symp., 2, 161 (1971)
  11. Langer, R., and Vacanti, J. P., Tissue engineering. Science, 260, 920-926 (1993) https://doi.org/10.1126/science.8493529
  12. Liu, L. O., Tho'paon, A. Y., Heidaran, M. A., Poser, J. W. and Spiro, R. C., An osteoconductive collagen/hyaluronate matrix for bone regeneration. Biomaterials, 20, 1097-1108 (1999) https://doi.org/10.1016/S0142-9612(99)00006-X
  13. Lynch, S. E., Castilla, S. E., Williams, R. C., Kiritsy, C. P., Howell, T. H., Reddy, M. S., and Antoniades, H. N., The effects of short-term application of a combination of platelet-derived and insulin-like growth factors on periodontal wound healing. J. Periodontol., 62, 458-467 (1991) https://doi.org/10.1902/jop.1991.62.7.458
  14. Matsuda, N., Lin, W. L., Kumar, N. M., Cho, M. I., and Genco, R. J., Mitogenic, chemotactic and synthetic response of rat periodontal ligament fibroblastic cells to polypeptide growth factors in vitro. J. Periodontol., 63, 515-525 (1992) https://doi.org/10.1902/jop.1992.63.6.515
  15. Park, J. B., Matsuura, M., Han, Norderyd, O., Lin, W. L.., Genco, R. J. and Cho, M. I., Periodontal regeneration in class III furcation defects of beagle dogs using guided tissue regenerative therapy with platelet-derived growth factor. J. Periodontol., 66, 462-477 (1995) https://doi.org/10.1902/jop.1995.66.6.462
  16. Pulio, D. A., Holleran, L. A., Doremus, R. H. and Bizios, R., Osteoblast responses to orthopedic implant materials in vitro. J. Biomed. Mater. Res., 25, 711-723 (1991) https://doi.org/10.1002/jbm.820250603
  17. Sepe, W. W., Bowers, G. M. and Lawrence, J. J., Clinical evaluation of freeze-dried bone allografts in periodontal osseous defects. J. Periodontol., 49, 9-14 (1978) https://doi.org/10.1902/jop.1978.49.1.9
  18. Schmitz, J. P. and Hollinger, J. O., The critical sized defects as an experimental model for craniomandibulofacial nonunions. Clin. Orthop., 205, 299-308 (1986)
  19. Vandamme, Th. F. and Legras, R., Physico-mechanic properties of poly($\varepsilon$-caprolactone) for the construction of rumino-reticulum devices for grazing animals. Biomaterials, 16, 1395-1400 (1995) https://doi.org/10.1016/0142-9612(95)96875-Z
  20. Vunjak-Novakovic, G., Obradovic, B., Matin, I., Bursac, P. M., Langer, R. and Freed, L. E., Dynamic cell seeding of polymer scaffolds for cartilage tissue engineering. Biotechnol. Prog., 14, 193-202 (1998) https://doi.org/10.1021/bp970120j
  21. Zhang, Y. and Zhang, M., Synthesis and characterization of macroporous chitosan/calcium phosphate composite scaffolds for tissue engineering. J. Biomed. Mater. Res., 55, 304-312 (2001) https://doi.org/10.1002/1097-4636(20010605)55:3<304::AID-JBM1018>3.0.CO;2-J