Abstract
This paper proposes a bottleneck link bandwidth measurement algorithm for reducing packet transmission delay within the grid network. There are two methods for measuring bottleneck link bandwidth:Packet Pair algorithm and Paced Probes algorithm. They measure bottleneck link bandwidth using the difference in arrival times of two paced probe packets of the same size traveling from the same source to destination. In addition, they reduce the influences of cross traffic by pacer packet. But there are some problems on these algorithms:it's not possible to know where bottleneck link occurred because they only focus on measuring the smallest link bandwidth along the path without considering bandwidth of every link on the path. So hop-by-hop based bottleneck link bandwidth measurement algorithm can be used for reducing packet transmission delay on grid network. Timestamp option was used on the paced probe packet for the link level measurement of bottleneck bandwidth. And the reducing of packet transmission delay was simulated by the solving a bottleneck link. The algorithm suggested in this paper can contribute to data transmission ensuring FTP and realtime QoS by detecting bandwidth and the location where bottleneck link occurred.
본 논문은 그리드 네트워크의 패킷 지연시간단축을 위한 병목 링크 대역폭 측정 알고리즘을 제안하고자 한다. 병목 링크 대역폭 측정방법으로 packet pair 알고리즘과 Paced Probes가 있으나 이들은 pacer 패킷으로 cross traffic의 영향을 줄이면서 Paced probe 패킷들이 링크를 지날 때 발생하는 시간 차이를 이용하여 병목 링크 대역폭을 구한다. 그러나 경로상의 병목 링크 대역폭을 측정할 뿐이지 병목현상이 발생한 지점은 알 수 없는 문제점이 있다. 이를 hop-by-hop 측정에 기반한 병목 대역폭 측정을 제시하여 그리드 네트워크에서 전체적인 패킷 지연 개선을 이룰 수 있다. hop-by-hop의 병목 대역폭을 측정하기 위해 paced probe 패킷에 타임스탬프 옵션을 이용하며 병목현상 해소를 통하여 패킷 전송 지연의 단축을 시뮬레이션을 통해 알 수 있다. 본 논문에서 제시한 알고리즘으로 병목 링크의 대역폭과 위치를 파악하여 그리드 ETP나 실시간 QoS를 보장하는 데이터 전송에 기여할 것으로 기대된다.